[Fri Feb 24 12:32:26 2012] Detection parameters:
  Position = (922.4, 763.8) = 16 40 20.37 -48 50 13.1
  Extent = 0.7" x 0.5", rotation angle = 91 degrees
  Source counts = 32.7 +/- 6.0
  Background counts = 3.3
  Rate = 0.0004 +/- 7e-05

[Fri Feb 24 12:32:30 2012] Off-axis axis estimate = 3.95'
[Fri Feb 24 16:41:54 2012] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 16:41:54 2012] Initial guess for spatial extent in simple fitting = 0.81"
[Fri Feb 24 16:41:54 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.077
[Fri Feb 24 16:41:54 2012] Giving source the simple spatial ID 92 for pass 0, mean size = 0.81"
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src92.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src92.csv
[Fri Feb 24 18:58:08 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src92_1.ximg exists
[Fri Feb 24 18:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src92.csv
[Fri Feb 24 18:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src92_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass0_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src92.ximg exists
[Fri Feb 24 18:58:09 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src92_1.ximg exists
[Fri Feb 24 18:58:09 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass0_tfrozen_src92 appears to have run properly
[Fri Feb 24 21:26:28 2012] Source 138 is offset by 1.859783 and 7.334553 pixels which is larger than
2 X fitted extent = 0.801931 x 0.801931, not incorporating fit results
[Fri Feb 24 21:26:28 2012] Spatial fit model total counts = 40.508000, observed total counts = 41.000000
[Fri Feb 24 21:26:28 2012] Offset between fit and detection position for source 138 = 0.751291 pixels
[Fri Feb 24 21:26:28 2012] 40.063590 total counts/ 6.137690 bgd. counts: snr = 13.693955
Spatial fit parameters:
  Offset between fit and detection position for source 138 = 0.751291 pixels
  Position = (922.9, 764.3) = 16 40 20.37 -48 50 13.0
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 33.9 +/- 6.3
  Background counts = 6.1
  Rate = 0.0004 +/- 7e-05
[Fri Feb 24 21:26:28 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:28 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:28 2012] Source does appear to be extended
[Fri Feb 24 21:26:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 01:25:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 01:25:05 2012] Initial guess for spatial extent in simple fitting = 0.72"
[Sat Feb 25 01:25:05 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.040
[Sat Feb 25 01:25:05 2012] Giving source the simple spatial ID 92 for pass 1, mean size = 0.72"
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src92.ximg exists
[Sat Feb 25 03:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src92.csv
[Sat Feb 25 03:23:01 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src92_1.ximg exists
[Sat Feb 25 03:23:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src92.csv
[Sat Feb 25 03:23:01 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src92_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04503_pi14-548_cl_pass1_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 03:23:02 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src92.ximg exists
[Sat Feb 25 03:23:02 2012] fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src92_1.ximg exists
[Sat Feb 25 03:23:02 2012] Fit fullrun_ccd3_acisf04503_pi14-548_cl_pass1_tfrozen_src92 appears to have run properly
[Sat Feb 25 05:43:16 2012] Spatial fit model total counts = 39.122800, observed total counts = 40.000000
[Sat Feb 25 05:43:16 2012] Offset between fit and detection position for source 138 = 0.076994 pixels
[Sat Feb 25 05:43:16 2012] 38.676320 total counts/ 3.882020 bgd. counts: snr = 17.659533
Spatial fit parameters:
  Offset between fit and detection position for source 138 = 0.076994 pixels
  Position = (923.0, 764.2) = 16 40 20.37 -48 50 13.1
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 34.8 +/- 6.2
  Background counts = 3.9
  Rate = 0.0004 +/- 7e-05
[Sat Feb 25 05:43:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:43:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:43:16 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:43:16 2012] Source does appear to be extended
[Sat Feb 25 05:43:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 06:15:38 2012] Writing source region out to fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src138_src.reg
[Sat Feb 25 06:15:38 2012] Extracting stamp from image fullrun_ccd3_acisf04503_pi14-548_cl_sm2.00.img.gz, (889, 731) - (957, 798)
[Sat Feb 25 06:15:38 2012] Writing fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src138.gif
[Sat Feb 25 06:32:23 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src138_src.evt.gz[events] = 36 counts
[Sat Feb 25 06:32:23 2012] Mean chipx,y = (708.94, 590.92)
[Sat Feb 25 06:32:23 2012] Mean tdetx,y = (4541.08, 3769.94)
[Sat Feb 25 06:32:23 2012] chipx,y range = (693.00-728.00, 575.00-610.00)
[Sat Feb 25 06:32:23 2012] Size of ../../acisf04503/products/events/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src138_bgd.evt.gz[events] = 49 counts
[Sat Feb 25 06:32:24 2012] Not generating rmf since there are only 34 counts
[Sat Feb 25 06:32:24 2012] arf not found, will run specextract
[Sat Feb 25 06:32:26 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src138_bkg.pi not found
[Sat Feb 25 06:32:26 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src138.warf not found
[Sat Feb 25 06:32:26 2012] ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src138.wrmf not found
[Sat Feb 25 06:32:26 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src138.soff failed
[Sat Feb 25 06:32:26 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src138_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src138_src.pi
[Sat Feb 25 06:45:37 2012] No arf file found
[Sat Feb 25 06:49:15 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:15 2012] Error reading totcts from fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src138_src.pi
[Sat Feb 25 06:49:16 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:32 2012] Flag b found in src. 138 procflags, skipping spectral fitting
[Sat Feb 25 06:49:32 2012] Source 138 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:33 2012] acisf04503/analysis//spectral/fullrun_ccd3_acisf04503_pi14-548_pass1_cl_src138_pl.csv not found, spectral fit skipped or did not complete