[Fri Feb 24 12:32:10 2012] Detection parameters:
  Position = (636.6, 532.1) = 16 40 5.98 -48 59 8.3
  Extent = 0.5" x 0.5", rotation angle = 127 degrees
  Source counts = 85.9 +/- 10.1
  Background counts = 17.1
  Rate = 0.001 +/- 0.0001

[Fri Feb 24 12:32:14 2012] Off-axis axis estimate = 7.34'
[Fri Feb 24 15:29:38 2012] Using EEF radius (= 2.39 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 15:29:38 2012] Initial guess for spatial extent in simple fitting = 2.39"
[Fri Feb 24 15:29:38 2012] source mask rpix=4.9, npix_max = 114, mask sum = 108, frac = 0.941
[Fri Feb 24 15:29:38 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 2.39"
[Fri Feb 24 16:41:53 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src11.ximg exists
[Fri Feb 24 16:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src11.csv
[Fri Feb 24 16:41:53 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Feb 24 16:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src11.csv
[Fri Feb 24 16:41:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 16:41:54 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Feb 24 16:41:54 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Feb 24 16:41:54 2012] Fit fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Feb 24 21:26:15 2012] Spatial fit model total counts = 128.999000, observed total counts = 129.000000
[Fri Feb 24 21:26:15 2012] Offset between fit and detection position for source 57 = 0.616943 pixels
[Fri Feb 24 21:26:15 2012] 129.865000 total counts/ 52.003500 bgd. counts: snr = 10.797084
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 0.616943 pixels
  Position = (637.2, 532.3) = 16 40 5.98 -48 59 8.4
  Extent = 1.8 (1.4-2.3)", rotation angle = 0
  Source counts = 77.9 +/- 11.4
  Background counts = 52.0
  Rate = 0.0009 +/- 0.0001
[Fri Feb 24 21:26:16 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:16 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:16 2012] Source does appear to be extended
[Fri Feb 24 21:26:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 00:17:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 00:17:09 2012] Initial guess for spatial extent in simple fitting = 1.79"
[Sat Feb 25 00:17:09 2012] source mask rpix=3.6, npix_max = 68, mask sum = 64, frac = 0.932
[Sat Feb 25 00:17:09 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 1.79"
[Sat Feb 25 01:25:04 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src11.ximg exists
[Sat Feb 25 01:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src11.csv
[Sat Feb 25 01:25:04 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Feb 25 01:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src11.csv
[Sat Feb 25 01:25:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 01:25:05 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Feb 25 01:25:05 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Feb 25 01:25:05 2012] Fit fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Feb 25 05:43:03 2012] Spatial fit model total counts = 103.985000, observed total counts = 107.000000
[Sat Feb 25 05:43:03 2012] Offset between fit and detection position for source 57 = 1.080145 pixels
[Sat Feb 25 05:43:03 2012] 104.078666 total counts/ 0.253666 bgd. counts: snr = 206.144053
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 1.080145 pixels
  Position = (636.7, 533.3) = 16 40 6.00 -48 59 7.9
  Extent = 2.3 (1.6-2.6)", rotation angle = 0
  Source counts = 103.8 +/- 10.2
  Background counts = 0.3
  Rate = 0.001 +/- 0.0001
[Sat Feb 25 05:43:03 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:43:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:43:03 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:43:03 2012] Source does appear to be extended
[Sat Feb 25 05:43:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 06:02:10 2012] Writing source region out to fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src57_src.reg
[Sat Feb 25 06:02:10 2012] Extracting stamp from image fullrun_ccd2_acisf04503_pi14-548_cl_sm2.00.img.gz, (533, 429) - (741, 637)
[Sat Feb 25 06:02:10 2012] Writing fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src57.gif
[Sat Feb 25 06:03:59 2012] Size of ../../acisf04503/products/events/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src57_src.evt.gz[events] = 135 counts
[Sat Feb 25 06:03:59 2012] Mean chipx,y = (676.57, 410.15)
[Sat Feb 25 06:03:59 2012] Mean tdetx,y = (3471.15, 3409.43)
[Sat Feb 25 06:03:59 2012] chipx,y range = (644.00-707.00, 379.00-438.00)
[Sat Feb 25 06:03:59 2012] Size of ../../acisf04503/products/events/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src57_bgd.evt.gz[events] = 285 counts
[Sat Feb 25 06:04:00 2012] rmf not found, will run specextract
[Sat Feb 25 06:04:00 2012] arf not found, will run specextract
[Sat Feb 25 06:04:02 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src57_bkg.pi not found
[Sat Feb 25 06:04:02 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src57.warf not found
[Sat Feb 25 06:04:02 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src57.wrmf not found
[Sat Feb 25 06:04:02 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src57.soff failed
[Sat Feb 25 06:04:02 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src57_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src57_src.pi
[Sat Feb 25 06:15:35 2012] No arf file found
[Sat Feb 25 06:49:12 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:12 2012] Error reading totcts from fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src57_src.pi
[Sat Feb 25 06:49:13 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:31 2012] Source 57 has no response, skipping
[Sat Feb 25 06:49:32 2012] acisf04503/analysis//spectral/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src57_pl.csv not found, spectral fit skipped or did not complete