[Fri Feb 24 12:32:09 2012] Detection parameters:
  Position = (718.0, 1066.3) = 16 40 1.91 -48 54 45.5
  Extent = 0.6" x 0.5", rotation angle = 93 degrees
  Source counts = 23.0 +/- 5.0
  Background counts = 2.0
  Rate = 0.0003 +/- 6e-05

[Fri Feb 24 12:32:14 2012] Off-axis axis estimate = 2.91'
[Fri Feb 24 15:29:38 2012] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 15:29:38 2012] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Feb 24 15:29:38 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.112
[Fri Feb 24 15:29:38 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 0.56"
[Fri Feb 24 16:41:53 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src32.ximg exists
[Fri Feb 24 16:41:53 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src32_1.ximg exists
[Fri Feb 24 16:41:53 2012] Fit fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src32 appears to have run properly
[Fri Feb 24 16:41:54 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src32.ximg exists
[Fri Feb 24 16:41:54 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src32_1.ximg exists
[Fri Feb 24 16:41:54 2012] Fit fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src32 appears to have run properly
[Fri Feb 24 21:26:16 2012] Spatial fit model total counts = 28.167000, observed total counts = 28.000000
[Fri Feb 24 21:26:16 2012] Offset between fit and detection position for source 35 = 0.467205 pixels
[Fri Feb 24 21:26:16 2012] 28.623460 total counts/ 5.785860 bgd. counts: snr = 9.494378
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.467205 pixels
  Position = (718.3, 1066.7) = 16 40 1.92 -48 54 45.5
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 22.8 +/- 5.4
  Background counts = 5.8
  Rate = 0.0003 +/- 6e-05
[Fri Feb 24 21:26:16 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:16 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:16 2012] Source does appear to be extended
[Fri Feb 24 21:26:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 00:17:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 00:17:09 2012] Initial guess for spatial extent in simple fitting = 0.65"
[Sat Feb 25 00:17:09 2012] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.678
[Sat Feb 25 00:17:09 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 0.65"
[Sat Feb 25 01:25:04 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src32.ximg exists
[Sat Feb 25 01:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src32.csv
[Sat Feb 25 01:25:04 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src32_1.ximg exists
[Sat Feb 25 01:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src32.csv
[Sat Feb 25 01:25:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 01:25:05 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src32.ximg exists
[Sat Feb 25 01:25:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src32.csv
[Sat Feb 25 01:25:05 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src32_1.ximg exists
[Sat Feb 25 01:25:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src32.csv
[Sat Feb 25 01:25:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 05:43:03 2012] Spatial fit model total counts = 23.779200, observed total counts = 28.000000
[Sat Feb 25 05:43:03 2012] Offset between fit and detection position for source 35 = 0.018763 pixels
[Sat Feb 25 05:43:03 2012] 24.860820 total counts/ 1.394420 bgd. counts: snr = 19.872370
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.018763 pixels
  Position = (718.3, 1066.7) = 16 40 1.92 -48 54 45.5
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 23.5 +/- 5.0
  Background counts = 1.4
  Rate = 0.0003 +/- 6e-05
[Sat Feb 25 05:43:03 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:43:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:43:03 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:43:03 2012] Source does appear to be extended
[Sat Feb 25 05:43:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 06:02:10 2012] Writing source region out to fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src35_src.reg
[Sat Feb 25 06:02:10 2012] Extracting stamp from image fullrun_ccd2_acisf04503_pi14-548_cl_sm2.00.img.gz, (688, 1036) - (749, 1097)
[Sat Feb 25 06:02:10 2012] Writing fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src35.gif
[Sat Feb 25 06:07:40 2012] Size of ../../acisf04503/products/events/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src35_src.evt.gz[events] = 24 counts
[Sat Feb 25 06:07:40 2012] Mean chipx,y = (310.58, 808.04)
[Sat Feb 25 06:07:40 2012] Mean tdetx,y = (3869.04, 3775.42)
[Sat Feb 25 06:07:40 2012] chipx,y range = (295.00-329.00, 792.00-829.00)
[Sat Feb 25 06:07:40 2012] Size of ../../acisf04503/products/events/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 24 counts
[Sat Feb 25 06:07:41 2012] Not generating rmf since there are only 23 counts
[Sat Feb 25 06:07:41 2012] arf not found, will run specextract
[Sat Feb 25 06:07:42 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src35_bkg.pi not found
[Sat Feb 25 06:07:42 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src35.warf not found
[Sat Feb 25 06:07:42 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src35.wrmf not found
[Sat Feb 25 06:07:42 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src35.soff failed
[Sat Feb 25 06:07:42 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src35_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src35_src.pi
[Sat Feb 25 06:15:35 2012] No arf file found
[Sat Feb 25 06:49:12 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:12 2012] Error reading totcts from fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src35_src.pi
[Sat Feb 25 06:49:13 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:31 2012] Source 35 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:32 2012] acisf04503/analysis//spectral/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete