[Fri Feb 24 12:32:09 2012] Detection parameters:
  Position = (871.8, 1007.5) = 16 39 54.23 -48 55 14.4
  Extent = 0.6" x 0.6", rotation angle = 52 degrees
  Source counts = 15.4 +/- 4.1
  Background counts = 1.6
  Rate = 0.0002 +/- 5e-05

[Fri Feb 24 12:32:14 2012] Off-axis axis estimate = 3.42'
[Fri Feb 24 15:29:38 2012] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 15:29:38 2012] Initial guess for spatial extent in simple fitting = 0.67"
[Fri Feb 24 15:29:38 2012] source mask rpix=1.4, npix_max = 13, mask sum = 9, frac = 0.645
[Fri Feb 24 15:29:38 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 0.67"
[Fri Feb 24 16:41:53 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src48.ximg exists
[Fri Feb 24 16:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src48.csv
[Fri Feb 24 16:41:53 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src48_1.ximg exists
[Fri Feb 24 16:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src48.csv
[Fri Feb 24 16:41:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 16:41:54 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src48.ximg exists
[Fri Feb 24 16:41:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src48.csv
[Fri Feb 24 16:41:54 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src48_1.ximg exists
[Fri Feb 24 16:41:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src48.csv
[Fri Feb 24 16:41:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 21:26:16 2012] Spatial fit model total counts = 23.295200, observed total counts = 26.000000
[Fri Feb 24 21:26:16 2012] Offset between fit and detection position for source 30 = 0.572847 pixels
[Fri Feb 24 21:26:16 2012] 24.068887 total counts/ 0.411787 bgd. counts: snr = 36.865930
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.572847 pixels
  Position = (871.6, 1008.0) = 16 39 54.27 -48 55 14.4
  Extent = 1.0 (0.6-1.4)", rotation angle = 0
  Source counts = 23.7 +/- 4.9
  Background counts = 0.4
  Rate = 0.0003 +/- 6e-05
[Fri Feb 24 21:26:16 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:16 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:16 2012] Source does appear to be extended
[Fri Feb 24 21:26:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 00:17:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 00:17:09 2012] Initial guess for spatial extent in simple fitting = 1.00"
[Sat Feb 25 00:17:09 2012] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.897
[Sat Feb 25 00:17:09 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 1.00"
[Sat Feb 25 01:25:05 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src48.ximg exists
[Sat Feb 25 01:25:05 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src48_1.ximg exists
[Sat Feb 25 01:25:05 2012] Fit fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src48 appears to have run properly
[Sat Feb 25 01:25:05 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src48.ximg exists
[Sat Feb 25 01:25:05 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src48_1.ximg exists
[Sat Feb 25 01:25:05 2012] Fit fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src48 appears to have run properly
[Sat Feb 25 05:43:03 2012] Spatial fit model total counts = 24.906800, observed total counts = 26.000000
[Sat Feb 25 05:43:03 2012] Offset between fit and detection position for source 30 = 0.267169 pixels
[Sat Feb 25 05:43:03 2012] 25.453190 total counts/ 1.478090 bgd. counts: snr = 19.720140
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.267169 pixels
  Position = (871.5, 1008.3) = 16 39 54.27 -48 55 14.3
  Extent = 1.1 (0.7-1.4)", rotation angle = 0
  Source counts = 24.0 +/- 5.0
  Background counts = 1.5
  Rate = 0.0003 +/- 6e-05
[Sat Feb 25 05:43:03 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:43:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:43:03 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:43:03 2012] Source does appear to be extended
[Sat Feb 25 05:43:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 06:02:11 2012] Writing source region out to fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src30_src.reg
[Sat Feb 25 06:02:11 2012] Extracting stamp from image fullrun_ccd2_acisf04503_pi14-548_cl_sm2.00.img.gz, (822, 959) - (921, 1057)
[Sat Feb 25 06:02:11 2012] Writing fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src30.gif
[Sat Feb 25 06:10:26 2012] Size of ../../acisf04503/products/events/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src30_src.evt.gz[events] = 26 counts
[Sat Feb 25 06:10:26 2012] Mean chipx,y = (219.69, 675.88)
[Sat Feb 25 06:10:26 2012] Mean tdetx,y = (3736.88, 3866.31)
[Sat Feb 25 06:10:26 2012] chipx,y range = (199.00-236.00, 659.00-697.00)
[Sat Feb 25 06:10:26 2012] Size of ../../acisf04503/products/events/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 60 counts
[Sat Feb 25 06:10:27 2012] Not generating rmf since there are only 23 counts
[Sat Feb 25 06:10:27 2012] arf not found, will run specextract
[Sat Feb 25 06:10:28 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src30_bkg.pi not found
[Sat Feb 25 06:10:28 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src30.warf not found
[Sat Feb 25 06:10:28 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src30.wrmf not found
[Sat Feb 25 06:10:28 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src30.soff failed
[Sat Feb 25 06:10:28 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src30_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src30_src.pi
[Sat Feb 25 06:15:35 2012] No arf file found
[Sat Feb 25 06:49:13 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:13 2012] Error reading totcts from fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src30_src.pi
[Sat Feb 25 06:49:13 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:31 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:32 2012] acisf04503/analysis//spectral/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete