[Fri Feb 24 12:32:08 2012] Detection parameters:
  Position = (584.0, 853.8) = 16 40 8.60 -48 56 30.0
  Extent = 0.9" x 0.6", rotation angle = 130 degrees
  Source counts = 46.6 +/- 7.1
  Background counts = 3.4
  Rate = 0.0005 +/- 8e-05

[Fri Feb 24 12:32:14 2012] Off-axis axis estimate = 4.88'
[Fri Feb 24 15:29:38 2012] Using EEF radius (= 1.13 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 15:29:38 2012] Initial guess for spatial extent in simple fitting = 1.13"
[Fri Feb 24 15:29:38 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.144
[Fri Feb 24 15:29:38 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 1.13"
[Fri Feb 24 16:41:53 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src19.ximg exists
[Fri Feb 24 16:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src19.csv
[Fri Feb 24 16:41:53 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src19_1.ximg exists
[Fri Feb 24 16:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src19.csv
[Fri Feb 24 16:41:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 16:41:54 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Fri Feb 24 16:41:54 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Feb 24 16:41:54 2012] Fit fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Feb 24 21:26:16 2012] Spatial fit model total counts = 51.239600, observed total counts = 52.000000
[Fri Feb 24 21:26:16 2012] Offset between fit and detection position for source 21 = 0.755902 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.755902 pixels
  Position = (584.5, 854.3) = 16 40 8.60 -48 56 30.0
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 50.7 +/- 7.1
  Background counts = 0.0
  Rate = 0.0006 +/- 8e-05
[Fri Feb 24 21:26:16 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:16 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:16 2012] Source does appear to be extended
[Fri Feb 24 21:26:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 00:17:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 00:17:09 2012] Initial guess for spatial extent in simple fitting = 1.05"
[Sat Feb 25 00:17:09 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.904
[Sat Feb 25 00:17:09 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 1.05"
[Sat Feb 25 01:25:04 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src19.ximg exists
[Sat Feb 25 01:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src19.csv
[Sat Feb 25 01:25:04 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src19_1.ximg exists
[Sat Feb 25 01:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src19.csv
[Sat Feb 25 01:25:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 01:25:05 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Sat Feb 25 01:25:05 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Feb 25 01:25:05 2012] Fit fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Feb 25 05:43:03 2012] Spatial fit model total counts = 50.739400, observed total counts = 52.000000
[Sat Feb 25 05:43:03 2012] Offset between fit and detection position for source 21 = 0.030383 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.030383 pixels
  Position = (584.5, 854.3) = 16 40 8.60 -48 56 30.0
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 50.0 +/- 7.1
  Background counts = 0.0
  Rate = 0.0006 +/- 8e-05
[Sat Feb 25 05:43:03 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:43:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:43:03 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:43:03 2012] Source does appear to be extended
[Sat Feb 25 05:43:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 06:02:10 2012] Writing source region out to fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src21_src.reg
[Sat Feb 25 06:02:10 2012] Extracting stamp from image fullrun_ccd2_acisf04503_pi14-548_cl_sm2.00.img.gz, (537, 806) - (632, 902)
[Sat Feb 25 06:02:10 2012] Writing fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src21.gif
[Sat Feb 25 06:05:24 2012] Size of ../../acisf04503/products/events/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src21_src.evt.gz[events] = 54 counts
[Sat Feb 25 06:05:24 2012] Mean chipx,y = (537.61, 706.39)
[Sat Feb 25 06:05:24 2012] Mean tdetx,y = (3767.39, 3548.39)
[Sat Feb 25 06:05:24 2012] chipx,y range = (525.00-556.00, 690.00-727.00)
[Sat Feb 25 06:05:24 2012] Size of ../../acisf04503/products/events/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 59 counts
[Sat Feb 25 06:05:26 2012] Not generating rmf since there are only 49 counts
[Sat Feb 25 06:05:26 2012] arf not found, will run specextract
[Sat Feb 25 06:05:28 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src21_bkg.pi not found
[Sat Feb 25 06:05:28 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src21.warf not found
[Sat Feb 25 06:05:28 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src21.wrmf not found
[Sat Feb 25 06:05:28 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src21.soff failed
[Sat Feb 25 06:05:28 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src21_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src21_src.pi
[Sat Feb 25 06:15:35 2012] No arf file found
[Sat Feb 25 06:49:12 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:12 2012] Error reading totcts from fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src21_src.pi
[Sat Feb 25 06:49:13 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:31 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:32 2012] acisf04503/analysis//spectral/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete