[Fri Feb 24 12:32:08 2012] Detection parameters:
  Position = (391.8, 837.4) = 16 40 18.20 -48 56 38.0
  Extent = 1.2" x 0.7", rotation angle = 121 degrees
  Source counts = 75.9 +/- 9.1
  Background counts = 7.1
  Rate = 0.0009 +/- 0.0001

[Fri Feb 24 12:32:14 2012] Off-axis axis estimate = 5.72'
[Fri Feb 24 15:29:38 2012] Using EEF radius (= 1.49 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 15:29:38 2012] Initial guess for spatial extent in simple fitting = 1.49"
[Fri Feb 24 15:29:38 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.979
[Fri Feb 24 15:29:38 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 1.49"
[Fri Feb 24 16:41:53 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src13.ximg exists
[Fri Feb 24 16:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src13.csv
[Fri Feb 24 16:41:53 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src13_1.ximg exists
[Fri Feb 24 16:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src13.csv
[Fri Feb 24 16:41:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 16:41:54 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri Feb 24 16:41:54 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Feb 24 16:41:54 2012] Fit fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Feb 24 21:26:15 2012] Spatial fit model total counts = 95.455400, observed total counts = 96.000000
[Fri Feb 24 21:26:15 2012] Offset between fit and detection position for source 19 = 0.543381 pixels
[Fri Feb 24 21:26:15 2012] 97.536200 total counts/ 31.601200 bgd. counts: snr = 11.729087
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.543381 pixels
  Position = (392.0, 837.9) = 16 40 18.22 -48 56 38.0
  Extent = 1.1 (0.9-1.5)", rotation angle = 0
  Source counts = 65.9 +/- 9.9
  Background counts = 31.6
  Rate = 0.0007 +/- 0.0001
[Fri Feb 24 21:26:16 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:16 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:16 2012] Source does appear to be extended
[Fri Feb 24 21:26:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 00:17:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 00:17:09 2012] Initial guess for spatial extent in simple fitting = 1.14"
[Sat Feb 25 00:17:09 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.139
[Sat Feb 25 00:17:09 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 1.14"
[Sat Feb 25 01:25:04 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src13.ximg exists
[Sat Feb 25 01:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src13.csv
[Sat Feb 25 01:25:04 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src13_1.ximg exists
[Sat Feb 25 01:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src13.csv
[Sat Feb 25 01:25:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 01:25:05 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sat Feb 25 01:25:05 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Feb 25 01:25:05 2012] Fit fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Feb 25 05:43:03 2012] Spatial fit model total counts = 88.599500, observed total counts = 89.000000
[Sat Feb 25 05:43:03 2012] Offset between fit and detection position for source 19 = 0.067532 pixels
[Sat Feb 25 05:43:03 2012] 89.678200 total counts/ 19.815900 bgd. counts: snr = 15.694084
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.067532 pixels
  Position = (392.0, 838.0) = 16 40 18.22 -48 56 38.0
  Extent = 1.2 (0.9-1.6)", rotation angle = 0
  Source counts = 69.9 +/- 9.5
  Background counts = 19.8
  Rate = 0.0008 +/- 0.0001
[Sat Feb 25 05:43:03 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:43:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:43:03 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:43:03 2012] Source does appear to be extended
[Sat Feb 25 05:43:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 06:02:10 2012] Writing source region out to fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src19_src.reg
[Sat Feb 25 06:02:10 2012] Extracting stamp from image fullrun_ccd2_acisf04503_pi14-548_cl_sm2.00.img.gz, (337, 783) - (447, 893)
[Sat Feb 25 06:02:10 2012] Writing fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src19.gif
[Sat Feb 25 06:04:20 2012] Size of ../../acisf04503/products/events/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src19_src.evt.gz[events] = 97 counts
[Sat Feb 25 06:04:20 2012] Mean chipx,y = (713.23, 798.57)
[Sat Feb 25 06:04:20 2012] Mean tdetx,y = (3859.57, 3372.77)
[Sat Feb 25 06:04:20 2012] chipx,y range = (693.00-731.00, 780.00-824.00)
[Sat Feb 25 06:04:20 2012] Size of ../../acisf04503/products/events/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 110 counts
[Sat Feb 25 06:04:21 2012] Not generating rmf since there are only 69 counts
[Sat Feb 25 06:04:21 2012] arf not found, will run specextract
[Sat Feb 25 06:04:23 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src19_bkg.pi not found
[Sat Feb 25 06:04:23 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src19.warf not found
[Sat Feb 25 06:04:23 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src19.wrmf not found
[Sat Feb 25 06:04:23 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src19.soff failed
[Sat Feb 25 06:04:23 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src19_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src19_src.pi
[Sat Feb 25 06:15:35 2012] No arf file found
[Sat Feb 25 06:49:12 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:12 2012] Error reading totcts from fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src19_src.pi
[Sat Feb 25 06:49:13 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:31 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:32 2012] acisf04503/analysis//spectral/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete