[Fri Feb 24 12:32:07 2012] Detection parameters:
  Position = (1028.8, 843.8) = 16 39 46.39 -48 56 34.9
  Extent = 1.0" x 0.7", rotation angle = 152 degrees
  Source counts = 862.1 +/- 29.7
  Background counts = 21.9
  Rate = 0.01 +/- 0.0003

[Fri Feb 24 12:32:14 2012] Off-axis axis estimate = 5.10'
[Fri Feb 24 15:29:38 2012] Using EEF radius (= 1.22 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 15:29:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 24 15:29:38 2012] Initial guess for spatial extent in simple fitting = 1.22"
[Fri Feb 24 15:29:38 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.013
[Fri Feb 24 15:29:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.22"
[Fri Feb 24 16:41:53 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src1.ximg exists
[Fri Feb 24 16:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src1.csv
[Fri Feb 24 16:41:53 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Feb 24 16:41:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src1.csv
[Fri Feb 24 16:41:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04503_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 16:41:53 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 24 16:41:53 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 24 16:41:53 2012] Fit fullrun_ccd2_acisf04503_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 24 21:26:15 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.650273 pixels away
[Fri Feb 24 21:26:16 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:16 2012] Assessing source extent using major
[Fri Feb 24 21:26:16 2012] Source does appear to be extended
[Fri Feb 24 21:26:16 2012] Computing asymmetry using major and minor axis, asym = 1.40
[Sat Feb 25 00:17:09 2012] Using EEF radius (= 1.22 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 00:17:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 25 00:17:09 2012] Initial guess for spatial extent in simple fitting = 1.22"
[Sat Feb 25 00:17:09 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.013
[Sat Feb 25 00:17:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.22"
[Sat Feb 25 01:25:04 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src1.ximg exists
[Sat Feb 25 01:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src1.csv
[Sat Feb 25 01:25:04 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Feb 25 01:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src1.csv
[Sat Feb 25 01:25:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04503_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 01:25:05 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Feb 25 01:25:05 2012] fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Feb 25 01:25:05 2012] Fit fullrun_ccd2_acisf04503_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Feb 25 05:43:03 2012] Spatial fit model total counts = 884.098000, observed total counts = 883.000000
[Sat Feb 25 05:43:03 2012] Offset between fit and detection position for source 1 = 0.768760 pixels
[Sat Feb 25 05:43:03 2012] 888.353400 total counts/ 89.633400 bgd. counts: snr = 84.364478
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.768760 pixels
  Position = (1029.3, 844.3) = 16 39 46.39 -48 56 34.9
  Extent = 1.2 (1.2-1.3)", rotation angle = 0
  Source counts = 798.7 +/- 29.8
  Background counts = 89.6
  Rate = 0.009 +/- 0.0003
[Sat Feb 25 05:43:03 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:43:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:43:03 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:43:03 2012] Source does appear to be extended
[Sat Feb 25 05:43:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 06:02:09 2012] Writing source region out to fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src1_src.reg
[Sat Feb 25 06:02:09 2012] Extracting stamp from image fullrun_ccd2_acisf04503_pi14-548_cl_sm2.00.img.gz, (973, 788) - (1086, 901)
[Sat Feb 25 06:02:09 2012] Writing fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src1.gif
[Sat Feb 25 06:02:14 2012] Size of ../../acisf04503/products/events/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src1_src.evt.gz[events] = 879 counts
[Sat Feb 25 06:02:14 2012] Mean chipx,y = (177.41, 452.65)
[Sat Feb 25 06:02:14 2012] Mean tdetx,y = (3513.65, 3908.59)
[Sat Feb 25 06:02:14 2012] chipx,y range = (151.00-200.00, 430.00-478.00)
[Sat Feb 25 06:02:14 2012] Size of ../../acisf04503/products/events/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 106 counts
[Sat Feb 25 06:02:15 2012] rmf not found, will run specextract
[Sat Feb 25 06:02:15 2012] arf not found, will run specextract
[Sat Feb 25 06:02:17 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src1_bkg.pi not found
[Sat Feb 25 06:02:17 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src1.warf not found
[Sat Feb 25 06:02:17 2012] ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src1.wrmf not found
[Sat Feb 25 06:02:17 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src1.soff failed
[Sat Feb 25 06:02:17 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src1_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src1_src.pi
[Sat Feb 25 06:15:35 2012] No arf file found
[Sat Feb 25 06:49:12 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:12 2012] Error reading totcts from fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src1_src.pi
[Sat Feb 25 06:49:13 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:31 2012] Source 1 has no response, skipping
[Sat Feb 25 06:49:32 2012] acisf04503/analysis//spectral/fullrun_ccd2_acisf04503_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete