[Fri Feb 24 12:32:04 2012] Detection parameters:
  Position = (436.1, 867.5) = 16 40 1.29 -48 44 31.4
  Extent = 1.7" x 1.5", rotation angle = 60 degrees
  Source counts = 21.8 +/- 5.5
  Background counts = 8.2
  Rate = 0.0002 +/- 6e-05

[Fri Feb 24 12:32:05 2012] Off-axis axis estimate = 7.39'
[Fri Feb 24 14:17:58 2012] Using EEF radius (= 2.42 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 14:17:58 2012] Initial guess for spatial extent in simple fitting = 2.42"
[Fri Feb 24 14:17:58 2012] source mask rpix=4.9, npix_max = 117, mask sum = 121, frac = 1.030
[Fri Feb 24 14:17:58 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 2.42"
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src35.ximg exists
[Fri Feb 24 15:29:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src35.csv
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src35_1.ximg exists
[Fri Feb 24 15:29:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src35.csv
[Fri Feb 24 15:29:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Fri Feb 24 15:29:38 2012] Fit fullrun_ccd1_acisf04503_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly
[Fri Feb 24 21:26:08 2012] Spatial fit model total counts = 56.716900, observed total counts = 57.000000
[Fri Feb 24 21:26:08 2012] Offset between fit and detection position for source 39 = 2.268002 pixels
[Fri Feb 24 21:26:08 2012] 58.782600 total counts/ 46.558100 bgd. counts: snr = 1.791569
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 2.268002 pixels
  Position = (436.7, 869.7) = 16 40 1.29 -48 44 30.5
  Extent = 1.3 (0.6-2.5)", rotation angle = 0
  Source counts = 12.2 +/- 7.7
  Background counts = 46.6
  Rate = 0.0001 +/- 9e-05
[Fri Feb 24 21:26:08 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:08 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:08 2012] Source does appear to be extended
[Fri Feb 24 21:26:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 23:15:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 23:15:02 2012] Initial guess for spatial extent in simple fitting = 1.28"
[Fri Feb 24 23:15:02 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Fri Feb 24 23:15:02 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 1.28"
[Sat Feb 25 00:17:09 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src35.ximg exists
[Sat Feb 25 00:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src35.csv
[Sat Feb 25 00:17:09 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src35_1.ximg exists
[Sat Feb 25 00:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src35.csv
[Sat Feb 25 00:17:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 00:17:09 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Sat Feb 25 00:17:09 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Feb 25 00:17:09 2012] Fit fullrun_ccd1_acisf04503_pi14-548_cl_pass1_tfrozen_src35 appears to have run properly
[Sat Feb 25 05:42:56 2012] Spatial fit model total counts = 21.035900, observed total counts = 23.000000
[Sat Feb 25 05:42:56 2012] Offset between fit and detection position for source 39 = 0.991743 pixels
[Sat Feb 25 05:42:56 2012] 22.430110 total counts/ 6.820710 bgd. counts: snr = 5.976837
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.991743 pixels
  Position = (435.8, 870.1) = 16 40 1.33 -48 44 30.3
  Extent = 1.4 (0.5-2.6)", rotation angle = 0
  Source counts = 15.6 +/- 4.7
  Background counts = 6.8
  Rate = 0.0002 +/- 5e-05
[Sat Feb 25 05:42:56 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:42:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:42:56 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:42:56 2012] Source does appear to be extended
[Sat Feb 25 05:42:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 05:53:43 2012] Writing source region out to fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src39_src.reg
[Sat Feb 25 05:53:43 2012] Extracting stamp from image fullrun_ccd1_acisf04503_pi14-548_cl_sm2.00.img.gz, (372, 806) - (500, 934)
[Sat Feb 25 05:53:43 2012] Writing fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src39.gif
[Sat Feb 25 05:59:49 2012] Size of ../../acisf04503/products/events/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src39_src.evt.gz[events] = 39 counts
[Sat Feb 25 05:59:49 2012] Mean chipx,y = (372.56, 222.77)
[Sat Feb 25 05:59:49 2012] Mean tdetx,y = (4909.23, 4479.56)
[Sat Feb 25 05:59:49 2012] chipx,y range = (346.00-396.00, 201.00-244.00)
[Sat Feb 25 05:59:49 2012] Size of ../../acisf04503/products/events/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src39_bgd.evt.gz[events] = 99 counts
[Sat Feb 25 05:59:51 2012] Not generating rmf since there are only 15 counts
[Sat Feb 25 05:59:51 2012] arf not found, will run specextract
[Sat Feb 25 05:59:52 2012] ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src39_bkg.pi not found
[Sat Feb 25 05:59:52 2012] ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src39.warf not found
[Sat Feb 25 05:59:52 2012] ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src39.wrmf not found
[Sat Feb 25 05:59:52 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src39.soff failed
[Sat Feb 25 05:59:52 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src39_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src39_src.pi
[Sat Feb 25 06:02:09 2012] No arf file found
[Sat Feb 25 06:49:12 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:12 2012] Error reading totcts from fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src39_src.pi
[Sat Feb 25 06:49:12 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:30 2012] Source 39 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:31 2012] acisf04503/analysis//spectral/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete