[Fri Feb 24 12:32:03 2012] Detection parameters:
  Position = (821.8, 983.0) = 16 39 42.12 -48 43 34.4
  Extent = 1.7" x 0.9", rotation angle = 30 degrees
  Source counts = 45.8 +/- 8.7
  Background counts = 30.2
  Rate = 0.0005 +/- 0.0001

[Fri Feb 24 12:32:05 2012] Off-axis axis estimate = 8.76'
[Fri Feb 24 14:17:58 2012] Using EEF radius (= 3.39 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 14:17:58 2012] Initial guess for spatial extent in simple fitting = 3.39"
[Fri Feb 24 14:17:58 2012] source mask rpix=6.9, npix_max = 218, mask sum = 210, frac = 0.961
[Fri Feb 24 14:17:58 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 3.39"
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src23.ximg exists
[Fri Feb 24 15:29:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src23.csv
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src23_1.ximg exists
[Fri Feb 24 15:29:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src23.csv
[Fri Feb 24 15:29:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Feb 24 15:29:38 2012] Fit fullrun_ccd1_acisf04503_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Feb 24 21:26:08 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 38.160609 pixels away
[Fri Feb 24 21:26:08 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:08 2012] Assessing source extent using major
[Fri Feb 24 21:26:08 2012] Source does appear to be extended
[Fri Feb 24 21:26:08 2012] Computing asymmetry using major and minor axis, asym = 1.84
[Fri Feb 24 21:26:08 2012] Source is asymmetric
[Fri Feb 24 23:15:02 2012] Using EEF radius (= 3.39 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 23:15:02 2012] Initial guess for spatial extent in simple fitting = 3.39"
[Fri Feb 24 23:15:02 2012] source mask rpix=6.9, npix_max = 218, mask sum = 210, frac = 0.961
[Fri Feb 24 23:15:02 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 3.39"
[Sat Feb 25 00:17:08 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src23.ximg exists
[Sat Feb 25 00:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src23.csv
[Sat Feb 25 00:17:08 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src23_1.ximg exists
[Sat Feb 25 00:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src23.csv
[Sat Feb 25 00:17:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 00:17:09 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Sat Feb 25 00:17:09 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Sat Feb 25 00:17:09 2012] Fit fullrun_ccd1_acisf04503_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Sat Feb 25 05:42:56 2012] Spatial fit model total counts = 93.965800, observed total counts = 94.000000
[Sat Feb 25 05:42:56 2012] Offset between fit and detection position for source 21 = 1.169650 pixels
[Sat Feb 25 05:42:56 2012] 95.071000 total counts/ 49.682000 bgd. counts: snr = 6.439484
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.169650 pixels
  Position = (820.6, 982.8) = 16 39 42.20 -48 43 34.8
  Extent = 2.7 (0.9-3.7)", rotation angle = 0
  Source counts = 45.4 +/- 9.8
  Background counts = 49.7
  Rate = 0.0005 +/- 0.0001
[Sat Feb 25 05:42:56 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:42:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:42:56 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:42:56 2012] Source does appear to be extended
[Sat Feb 25 05:42:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 05:53:43 2012] Writing source region out to fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src21_src.reg
[Sat Feb 25 05:53:43 2012] Extracting stamp from image fullrun_ccd1_acisf04503_pi14-548_cl_sm2.00.img.gz, (698, 860) - (944, 1106)
[Sat Feb 25 05:53:43 2012] Writing fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src21.gif
[Sat Feb 25 05:57:41 2012] Size of ../../acisf04503/products/events/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src21_src.evt.gz[events] = 91 counts
[Sat Feb 25 05:57:41 2012] Mean chipx,y = (755.78, 342.13)
[Sat Feb 25 05:57:41 2012] Mean tdetx,y = (4789.87, 4862.78)
[Sat Feb 25 05:57:41 2012] chipx,y range = (722.00-790.00, 309.00-377.00)
[Sat Feb 25 05:57:41 2012] Size of ../../acisf04503/products/events/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 435 counts
[Sat Feb 25 05:57:42 2012] Not generating rmf since there are only 45 counts
[Sat Feb 25 05:57:42 2012] arf not found, will run specextract
[Sat Feb 25 05:57:44 2012] ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src21_bkg.pi not found
[Sat Feb 25 05:57:44 2012] ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src21.warf not found
[Sat Feb 25 05:57:44 2012] ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src21.wrmf not found
[Sat Feb 25 05:57:44 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src21.soff failed
[Sat Feb 25 05:57:44 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src21_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src21_src.pi
[Sat Feb 25 06:02:09 2012] No arf file found
[Sat Feb 25 06:49:11 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:12 2012] Error reading totcts from fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src21_src.pi
[Sat Feb 25 06:49:12 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:30 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:31 2012] acisf04503/analysis//spectral/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete