[Fri Feb 24 12:32:02 2012] Detection parameters:
  Position = (362.3, 770.4) = 16 40 4.97 -48 45 19.1
  Extent = 0.5" x 0.5", rotation angle = 34 degrees
  Source counts = 54.7 +/- 7.8
  Background counts = 6.3
  Rate = 0.0006 +/- 9e-05

[Fri Feb 24 12:32:05 2012] Off-axis axis estimate = 6.66'
[Fri Feb 24 14:17:58 2012] Using EEF radius (= 1.98 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 14:17:58 2012] Initial guess for spatial extent in simple fitting = 1.98"
[Fri Feb 24 14:17:58 2012] source mask rpix=4.0, npix_max = 82, mask sum = 74, frac = 0.902
[Fri Feb 24 14:17:58 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 1.98"
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src21.ximg exists
[Fri Feb 24 15:29:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src21.csv
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src21_1.ximg exists
[Fri Feb 24 15:29:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src21.csv
[Fri Feb 24 15:29:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Feb 24 15:29:38 2012] Fit fullrun_ccd1_acisf04503_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Fri Feb 24 21:26:08 2012] Spatial fit model total counts = 103.909000, observed total counts = 104.000000
[Fri Feb 24 21:26:08 2012] Offset between fit and detection position for source 13 = 2.453718 pixels
[Fri Feb 24 21:26:08 2012] 105.227100 total counts/ 25.140000 bgd. counts: snr = 15.972759
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 2.453718 pixels
  Position = (363.0, 772.7) = 16 40 4.96 -48 45 18.2
  Extent = 1.4 (1.0-1.8)", rotation angle = 0
  Source counts = 80.1 +/- 10.3
  Background counts = 25.1
  Rate = 0.0009 +/- 0.0001
[Fri Feb 24 21:26:08 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:08 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:08 2012] Source does appear to be extended
[Fri Feb 24 21:26:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 23:15:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 23:15:02 2012] Initial guess for spatial extent in simple fitting = 1.40"
[Fri Feb 24 23:15:02 2012] source mask rpix=2.8, npix_max = 44, mask sum = 35, frac = 0.784
[Fri Feb 24 23:15:02 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 1.40"
[Sat Feb 25 00:17:08 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src21.ximg exists
[Sat Feb 25 00:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src21.csv
[Sat Feb 25 00:17:08 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src21_1.ximg exists
[Sat Feb 25 00:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src21.csv
[Sat Feb 25 00:17:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 00:17:09 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Sat Feb 25 00:17:09 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Feb 25 00:17:09 2012] Fit fullrun_ccd1_acisf04503_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Feb 25 05:42:56 2012] Spatial fit model total counts = 96.011500, observed total counts = 96.000000
[Sat Feb 25 05:42:56 2012] Offset between fit and detection position for source 13 = 0.409489 pixels
[Sat Feb 25 05:42:56 2012] 98.025100 total counts/ 37.994600 bgd. counts: snr = 9.738925
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.409489 pixels
  Position = (362.6, 772.7) = 16 40 4.98 -48 45 18.2
  Extent = 1.0 (0.9-1.4)", rotation angle = 0
  Source counts = 60.0 +/- 9.9
  Background counts = 38.0
  Rate = 0.0007 +/- 0.0001
[Sat Feb 25 05:42:56 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:42:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:42:56 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:42:56 2012] Source does appear to be extended
[Sat Feb 25 05:42:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 05:53:43 2012] Writing source region out to fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src13_src.reg
[Sat Feb 25 05:53:43 2012] Extracting stamp from image fullrun_ccd1_acisf04503_pi14-548_cl_sm2.00.img.gz, (315, 725) - (411, 821)
[Sat Feb 25 05:53:43 2012] Writing fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src13.gif
[Sat Feb 25 05:57:19 2012] Size of ../../acisf04503/products/events/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src13_src.evt.gz[events] = 92 counts
[Sat Feb 25 05:57:19 2012] Mean chipx,y = (257.14, 265.91)
[Sat Feb 25 05:57:19 2012] Mean tdetx,y = (4866.09, 4364.14)
[Sat Feb 25 05:57:19 2012] chipx,y range = (235.00-279.00, 244.00-285.00)
[Sat Feb 25 05:57:19 2012] Size of ../../acisf04503/products/events/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 58 counts
[Sat Feb 25 05:57:20 2012] Not generating rmf since there are only 60 counts
[Sat Feb 25 05:57:20 2012] arf not found, will run specextract
[Sat Feb 25 05:57:22 2012] ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src13_bkg.pi not found
[Sat Feb 25 05:57:22 2012] ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src13.warf not found
[Sat Feb 25 05:57:22 2012] ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src13.wrmf not found
[Sat Feb 25 05:57:22 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src13.soff failed
[Sat Feb 25 05:57:22 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src13_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src13_src.pi
[Sat Feb 25 06:02:09 2012] No arf file found
[Sat Feb 25 06:49:11 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:11 2012] Error reading totcts from fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src13_src.pi
[Sat Feb 25 06:49:12 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:30 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:31 2012] acisf04503/analysis//spectral/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete