[Fri Feb 24 12:32:02 2012] Detection parameters:
  Position = (133.9, 714.6) = 16 40 16.33 -48 45 46.5
  Extent = 1.7" x 1.1", rotation angle = 67 degrees
  Source counts = 60.3 +/- 8.4
  Background counts = 10.7
  Rate = 0.0007 +/- 9e-05

[Fri Feb 24 12:32:05 2012] Off-axis axis estimate = 6.78'
[Fri Feb 24 14:17:58 2012] Using EEF radius (= 2.05 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 14:17:58 2012] Initial guess for spatial extent in simple fitting = 2.05"
[Fri Feb 24 14:17:58 2012] source mask rpix=4.2, npix_max = 87, mask sum = 90, frac = 1.033
[Fri Feb 24 14:17:58 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 2.05"
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src19.ximg exists
[Fri Feb 24 15:29:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src19.csv
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src19_1.ximg exists
[Fri Feb 24 15:29:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src19.csv
[Fri Feb 24 15:29:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04503_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Fri Feb 24 15:29:38 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Feb 24 15:29:38 2012] Fit fullrun_ccd1_acisf04503_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Feb 24 21:26:08 2012] Spatial fit model total counts = 76.752000, observed total counts = 77.000000
[Fri Feb 24 21:26:08 2012] Offset between fit and detection position for source 12 = 1.475672 pixels
[Fri Feb 24 21:26:08 2012] 77.506600 total counts/ 32.646900 bgd. counts: snr = 7.851188
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.475672 pixels
  Position = (134.4, 716.0) = 16 40 16.34 -48 45 46.1
  Extent = 1.1 (0.9-1.4)", rotation angle = 0
  Source counts = 44.9 +/- 8.8
  Background counts = 32.6
  Rate = 0.0005 +/- 0.0001
[Fri Feb 24 21:26:08 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:08 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:26:08 2012] Source does appear to be extended
[Fri Feb 24 21:26:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 23:15:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 23:15:02 2012] Initial guess for spatial extent in simple fitting = 1.10"
[Fri Feb 24 23:15:02 2012] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.999
[Fri Feb 24 23:15:02 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 1.10"
[Sat Feb 25 00:17:08 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src19.ximg exists
[Sat Feb 25 00:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src19.csv
[Sat Feb 25 00:17:08 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src19_1.ximg exists
[Sat Feb 25 00:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src19.csv
[Sat Feb 25 00:17:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04503_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 00:17:09 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Sat Feb 25 00:17:09 2012] fullrun_ccd1_acisf04503_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Feb 25 00:17:09 2012] Fit fullrun_ccd1_acisf04503_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Feb 25 05:42:56 2012] Spatial fit model total counts = 60.325900, observed total counts = 61.000000
[Sat Feb 25 05:42:56 2012] Offset between fit and detection position for source 12 = 0.248265 pixels
[Sat Feb 25 05:42:56 2012] 61.009600 total counts/ 21.532400 bgd. counts: snr = 8.507464
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.248265 pixels
  Position = (134.3, 716.2) = 16 40 16.34 -48 45 46.0
  Extent = 1.0 (0.8-1.3)", rotation angle = 0
  Source counts = 39.5 +/- 7.8
  Background counts = 21.5
  Rate = 0.0004 +/- 9e-05
[Sat Feb 25 05:42:56 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:42:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:42:56 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:42:56 2012] Source does appear to be extended
[Sat Feb 25 05:42:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 05:53:43 2012] Writing source region out to fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src12_src.reg
[Sat Feb 25 05:53:43 2012] Extracting stamp from image fullrun_ccd1_acisf04503_pi14-548_cl_sm2.00.img.gz, (88, 670) - (180, 762)
[Sat Feb 25 05:53:43 2012] Writing fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src12.gif
[Sat Feb 25 05:56:58 2012] Size of ../../acisf04503/products/events/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src12_src.evt.gz[events] = 59 counts
[Sat Feb 25 05:56:58 2012] Mean chipx,y = (31.25, 187.27)
[Sat Feb 25 05:56:58 2012] Mean tdetx,y = (4944.73, 4138.25)
[Sat Feb 25 05:56:58 2012] chipx,y range = (14.00-49.00, 164.00-208.00)
[Sat Feb 25 05:56:58 2012] Size of ../../acisf04503/products/events/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 84 counts
[Sat Feb 25 05:56:59 2012] Not generating rmf since there are only 39 counts
[Sat Feb 25 05:56:59 2012] arf not found, will run specextract
[Sat Feb 25 05:57:01 2012] ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src12_bkg.pi not found
[Sat Feb 25 05:57:01 2012] ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src12.warf not found
[Sat Feb 25 05:57:01 2012] ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src12.wrmf not found
[Sat Feb 25 05:57:01 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src12.soff failed
[Sat Feb 25 05:57:01 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src12_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src12_src.pi
[Sat Feb 25 06:02:09 2012] No arf file found
[Sat Feb 25 06:49:11 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:11 2012] Error reading totcts from fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src12_src.pi
[Sat Feb 25 06:49:12 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:30 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:31 2012] acisf04503/analysis//spectral/fullrun_ccd1_acisf04503_pi14-548_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete