[Fri Feb 24 12:31:57 2012] Detection parameters:
  Position = (563.4, 846.9) = 16 39 26.09 -48 51 47.8
  Extent = 1.0" x 0.6", rotation angle = 0 degrees
  Source counts = 17.3 +/- 4.5
  Background counts = 2.7
  Rate = 0.0002 +/- 5e-05

[Fri Feb 24 12:32:00 2012] Off-axis axis estimate = 5.36'
[Fri Feb 24 12:37:52 2012] Using EEF radius (= 1.33 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 12:37:52 2012] Initial guess for spatial extent in simple fitting = 1.33"
[Fri Feb 24 12:37:52 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.023
[Fri Feb 24 12:37:52 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 1.33"
[Fri Feb 24 14:17:58 2012] fullrun_ccd0_acisf04503_pi14-548_cl_pass0_src30.ximg exists
[Fri Feb 24 14:17:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04503_pi14-548_cl_pass0_src30.csv
[Fri Feb 24 14:17:58 2012] fullrun_ccd0_acisf04503_pi14-548_cl_pass0_src30_1.ximg exists
[Fri Feb 24 14:17:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04503_pi14-548_cl_pass0_src30.csv
[Fri Feb 24 14:17:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04503_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04503_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 14:17:58 2012] fullrun_ccd0_acisf04503_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Fri Feb 24 14:17:58 2012] fullrun_ccd0_acisf04503_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Feb 24 14:17:58 2012] Fit fullrun_ccd0_acisf04503_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Fri Feb 24 21:26:02 2012] Spatial fit model total counts = 24.360500, observed total counts = 29.000000
[Fri Feb 24 21:26:02 2012] Offset between fit and detection position for source 34 = 3.111754 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 3.111754 pixels
  Position = (560.4, 847.6) = 16 39 26.26 -48 51 47.7
  Extent = 2.3" x 0.8", rotation angle = 360
  Source counts = 24.8 +/- 5.0
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Fri Feb 24 21:26:02 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:26:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:26:02 2012] Assessing source extent using major
[Fri Feb 24 21:26:02 2012] Source does appear to be extended
[Fri Feb 24 21:26:02 2012] Computing asymmetry using major and minor axis, asym = 2.83
[Fri Feb 24 21:26:02 2012] Source is asymmetric
[Fri Feb 24 21:27:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 21:27:19 2012] Initial guess for spatial extent in simple fitting = 1.56"
[Fri Feb 24 21:27:19 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.914
[Fri Feb 24 21:27:19 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 1.56"
[Fri Feb 24 23:15:01 2012] fullrun_ccd0_acisf04503_pi14-548_cl_pass1_src30.ximg exists
[Fri Feb 24 23:15:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04503_pi14-548_cl_pass1_src30.csv
[Fri Feb 24 23:15:01 2012] fullrun_ccd0_acisf04503_pi14-548_cl_pass1_src30_1.ximg exists
[Fri Feb 24 23:15:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04503_pi14-548_cl_pass1_src30.csv
[Fri Feb 24 23:15:01 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04503_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04503_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 23:15:02 2012] fullrun_ccd0_acisf04503_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Fri Feb 24 23:15:02 2012] fullrun_ccd0_acisf04503_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Feb 24 23:15:02 2012] Fit fullrun_ccd0_acisf04503_pi14-548_cl_pass1_tfrozen_src30 appears to have run properly
[Sat Feb 25 05:42:50 2012] Spatial fit model total counts = 24.749600, observed total counts = 29.000000
[Sat Feb 25 05:42:50 2012] Offset between fit and detection position for source 34 = 2.431069 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 2.431069 pixels
  Position = (562.8, 847.7) = 16 39 26.14 -48 51 47.6
  Extent = 2.7 (1.7-3.1)" x 0.8 (0.5-1.0)", rotation angle = 1 (351-12) degrees
  Source counts = 24.3 +/- 4.9
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Sat Feb 25 05:42:50 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 05:42:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 05:42:50 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 05:42:50 2012] Source does appear to be extended
[Sat Feb 25 05:42:50 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.70
[Sat Feb 25 05:42:50 2012] Source is asymmetric
[Sat Feb 25 05:44:05 2012] Writing source region out to fullrun_ccd0_acisf04503_pi14-548_pass1_cl_src34_src.reg
[Sat Feb 25 05:44:05 2012] Extracting stamp from image fullrun_ccd0_acisf04503_pi14-548_cl_sm2.00.img.gz, (441, 726) - (684, 969)
[Sat Feb 25 05:44:05 2012] Writing fullrun_ccd0_acisf04503_pi14-548_pass1_cl_src34.gif
[Sat Feb 25 05:49:34 2012] Size of ../../acisf04503/products/events/fullrun_ccd0_acisf04503_pi14-548_pass1_cl_src34_src.evt.gz[events] = 33 counts
[Sat Feb 25 05:49:34 2012] Mean chipx,y = (556.52, 707.91)
[Sat Feb 25 05:49:34 2012] Mean tdetx,y = (3768.88, 4575.48)
[Sat Feb 25 05:49:34 2012] chipx,y range = (535.00-585.00, 691.00-738.00)
[Sat Feb 25 05:49:34 2012] Size of ../../acisf04503/products/events/fullrun_ccd0_acisf04503_pi14-548_pass1_cl_src34_bgd.evt.gz[events] = 387 counts
[Sat Feb 25 05:49:35 2012] Not generating rmf since there are only 24 counts
[Sat Feb 25 05:49:35 2012] arf not found, will run specextract
[Sat Feb 25 05:49:37 2012] ../../acisf04503/products/spectra/fullrun_ccd0_acisf04503_pi14-548_pass1_cl_src34_bkg.pi not found
[Sat Feb 25 05:49:37 2012] ../../acisf04503/products/spectra/fullrun_ccd0_acisf04503_pi14-548_pass1_cl_src34.warf not found
[Sat Feb 25 05:49:37 2012] ../../acisf04503/products/spectra/fullrun_ccd0_acisf04503_pi14-548_pass1_cl_src34.wrmf not found
[Sat Feb 25 05:49:37 2012] Removal of ../../acisf04503/products/spectra/fullrun_ccd0_acisf04503_pi14-548_pass1_cl_src34.soff failed
[Sat Feb 25 05:49:37 2012] Failed to rename ../../acisf04503/products/spectra/fullrun_ccd0_acisf04503_pi14-548_pass1_cl_src34_grp.pi to ../../acisf04503/products/spectra/fullrun_ccd0_acisf04503_pi14-548_pass1_cl_src34_src.pi
[Sat Feb 25 05:53:42 2012] No arf file found
[Sat Feb 25 06:49:11 2012] Updating aperture counts using extracted products
[Sat Feb 25 06:49:11 2012] Error reading totcts from fullrun_ccd0_acisf04503_pi14-548_pass1_cl_src34_src.pi
[Sat Feb 25 06:49:11 2012] No arf file for this source, not re-computing flux
[Sat Feb 25 06:49:29 2012] Source 34 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 06:49:30 2012] acisf04503/analysis//spectral/fullrun_ccd0_acisf04503_pi14-548_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete