[Wed Sep 21 12:39:37 2011] Detection parameters:
  Position = (800.4, 752.5) = 20 32 14.73 41 27 39.4
  Extent = 0.5" x 0.5", rotation angle = 61 degrees
  Source counts = 61.2 +/- 8.0
  Background counts = 2.8
  Rate = 0.001 +/- 0.0002

[Wed Sep 21 12:40:05 2011] Off-axis axis estimate = 3.44'
[Wed Sep 21 12:42:48 2011] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 12:42:48 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Wed Sep 21 12:42:48 2011] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.639
[Wed Sep 21 12:42:48 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.68"
[Wed Sep 21 12:42:50 2011] fullrun_ccd3_acisf04501_pi14-548_cl_pass0_src19.ximg exists
[Wed Sep 21 12:42:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04501_pi14-548_cl_pass0_src19.csv
[Wed Sep 21 12:42:50 2011] fullrun_ccd3_acisf04501_pi14-548_cl_pass0_src19_1.ximg exists
[Wed Sep 21 12:42:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04501_pi14-548_cl_pass0_src19.csv
[Wed Sep 21 12:42:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04501_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04501_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 12:42:52 2011] fullrun_ccd3_acisf04501_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Wed Sep 21 12:42:52 2011] fullrun_ccd3_acisf04501_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Sep 21 12:42:52 2011] Fit fullrun_ccd3_acisf04501_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Sep 21 12:43:39 2011] Spatial fit model total counts = 67.070400, observed total counts = 66.000000
[Wed Sep 21 12:43:39 2011] Offset between fit and detection position for source 31 = 0.757058 pixels
[Wed Sep 21 12:43:39 2011] 66.459680 total counts/ 1.733980 bgd. counts: snr = 49.153530
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.757058 pixels
  Position = (800.9, 753.0) = 20 32 14.73 41 27 39.4
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 64.7 +/- 8.2
  Background counts = 1.7
  Rate = 0.001 +/- 0.0002
[Wed Sep 21 12:43:39 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 12:43:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 12:43:39 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 12:43:39 2011] Source does appear to be extended
[Wed Sep 21 12:43:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 12:44:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 12:44:52 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Wed Sep 21 12:44:52 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.426
[Wed Sep 21 12:44:52 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.58"
[Wed Sep 21 12:44:57 2011] fullrun_ccd3_acisf04501_pi14-548_cl_pass1_src19.ximg exists
[Wed Sep 21 12:44:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04501_pi14-548_cl_pass1_src19.csv
[Wed Sep 21 12:44:57 2011] fullrun_ccd3_acisf04501_pi14-548_cl_pass1_src19_1.ximg exists
[Wed Sep 21 12:44:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04501_pi14-548_cl_pass1_src19.csv
[Wed Sep 21 12:44:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04501_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04501_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 12:45:03 2011] fullrun_ccd3_acisf04501_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Wed Sep 21 12:45:03 2011] fullrun_ccd3_acisf04501_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Sep 21 12:45:03 2011] Fit fullrun_ccd3_acisf04501_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Sep 21 12:45:56 2011] Spatial fit model total counts = 67.523000, observed total counts = 66.000000
[Wed Sep 21 12:45:56 2011] Offset between fit and detection position for source 31 = 0.033945 pixels
[Wed Sep 21 12:45:56 2011] 67.823970 total counts/ 5.212770 bgd. counts: snr = 27.423176
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.033945 pixels
  Position = (800.9, 753.0) = 20 32 14.73 41 27 39.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 62.6 +/- 8.2
  Background counts = 5.2
  Rate = 0.001 +/- 0.0002
[Wed Sep 21 12:45:57 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 12:45:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 12:45:57 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 12:45:57 2011] Source does appear to be extended
[Wed Sep 21 12:45:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 12:56:26 2011] Not overwriting source region fullrun_ccd3_acisf04501_pi14-548_pass1_cl_src31_src.reg
[Wed Sep 21 12:56:26 2011] Extracting stamp from image fullrun_ccd3_acisf04501_pi14-548_cl_sm2.00.img.gz, (775, 727) - (827, 779)
[Wed Sep 21 12:56:26 2011] Writing fullrun_ccd3_acisf04501_pi14-548_pass1_cl_src31.gif
[Wed Sep 21 12:57:36 2011] ../../acisf04501/products/events/fullrun_ccd3_acisf04501_pi14-548_pass1_cl_src31_src.evt and ../../acisf04501/products/events/fullrun_ccd3_acisf04501_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Wed Sep 21 12:57:36 2011] Size of ../../acisf04501/products/events/fullrun_ccd3_acisf04501_pi14-548_pass1_cl_src31_src.evt.gz[events] = 64 counts
[Wed Sep 21 12:57:36 2011] Mean chipx,y = (632.91, 743.95)
[Wed Sep 21 12:57:36 2011] Mean tdetx,y = (4388.05, 3693.91)
[Wed Sep 21 12:57:36 2011] chipx,y range = (618.00-655.00, 726.00-762.00)
[Wed Sep 21 12:57:36 2011] Size of ../../acisf04501/products/events/fullrun_ccd3_acisf04501_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 19 counts
[Wed Sep 21 12:57:36 2011] ../../acisf04501/products/images/fullrun_ccd3_acisf04501_pi14-548_pass1_cl_src31_src.img and ../../acisf04501/products/images/fullrun_ccd3_acisf04501_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Wed Sep 21 12:57:36 2011] ../../acisf04501/products/spectra/fullrun_ccd3_acisf04501_pi14-548_pass1_cl_src31_src.pi and ../../acisf04501/products/spectra/fullrun_ccd3_acisf04501_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Wed Sep 21 12:57:36 2011] Not generating rmf since there are only 62 counts
[Wed Sep 21 12:57:39 2011] ../../acisf04501/products/lightcurves/fullrun_ccd3_acisf04501_pi14-548_pass1_cl_src31_src.lc and ../../acisf04501/products/lightcurves/fullrun_ccd3_acisf04501_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Wed Sep 21 13:04:18 2011] 192.178
[Wed Sep 21 13:05:20 2011] Updating aperture counts using extracted products
[Wed Sep 21 13:05:20 2011] Error reading totcts from fullrun_ccd3_acisf04501_pi14-548_pass1_cl_src31_src.pi.gz
[Wed Sep 21 13:05:21 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 13:05:21 2011] Using photon index=1.80, rate=0.00128, arf fullrun_ccd3_acisf04501_pi14-548_pass1_cl_src31.arf
[Wed Sep 21 13:05:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 13:05:21 2011] Updating source flux to 2e-14
[Wed Sep 21 13:05:57 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting