[Mon Oct  3 01:10:35 2011] Detection parameters:
  Position = (1126.9, 648.2) = 3 25 4.85 30 38 58.8
  Extent = 0.5" x 0.5", rotation angle = 137 degrees
  Source counts = 30.1 +/- 5.9
  Background counts = 4.9
  Rate = 0.0004 +/- 9e-05

[Mon Oct  3 01:10:35 2011] Off-axis axis estimate = 9.04'
[Mon Oct  3 01:12:00 2011] Using EEF radius (= 3.61 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 01:12:00 2011] Initial guess for spatial extent in simple fitting = 3.61"
[Mon Oct  3 01:12:00 2011] source mask rpix=7.3, npix_max = 246, mask sum = 145, frac = 0.589
[Mon Oct  3 01:12:00 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 3.61"
[Mon Oct  3 01:12:01 2011] fullrun_ccd0_acisf04497_pi14-548_cl_pass0_src10.ximg exists
[Mon Oct  3 01:12:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04497_pi14-548_cl_pass0_src10.csv
[Mon Oct  3 01:12:01 2011] fullrun_ccd0_acisf04497_pi14-548_cl_pass0_src10_1.ximg exists
[Mon Oct  3 01:12:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04497_pi14-548_cl_pass0_src10.csv
[Mon Oct  3 01:12:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04497_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04497_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 01:12:01 2011] fullrun_ccd0_acisf04497_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Mon Oct  3 01:12:01 2011] fullrun_ccd0_acisf04497_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Oct  3 01:12:01 2011] Fit fullrun_ccd0_acisf04497_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Oct  3 01:12:13 2011] Spatial fit model total counts = 190.710000, observed total counts = 187.000000
[Mon Oct  3 01:12:13 2011] Offset between fit and detection position for source 23 = 3.310370 pixels
[Mon Oct  3 01:12:13 2011] 190.597400 total counts/ 56.405400 bgd. counts: snr = 17.867603
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 3.310370 pixels
  Position = (1129.9, 646.7) = 3 25 4.75 30 38 57.9
  Extent = 3.2 (2.3-3.8)", rotation angle = 0
  Source counts = 134.2 +/- 13.8
  Background counts = 56.4
  Rate = 0.002 +/- 0.0002
[Mon Oct  3 01:12:13 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 01:12:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 01:12:13 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 01:12:13 2011] Source does appear to be extended
[Mon Oct  3 01:12:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 01:12:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 01:12:45 2011] Initial guess for spatial extent in simple fitting = 3.18"
[Mon Oct  3 01:12:45 2011] source mask rpix=6.5, npix_max = 193, mask sum = 139, frac = 0.718
[Mon Oct  3 01:12:45 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 3.18"
[Mon Oct  3 01:12:45 2011] fullrun_ccd0_acisf04497_pi14-548_cl_pass1_src10.ximg exists
[Mon Oct  3 01:12:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04497_pi14-548_cl_pass1_src10.csv
[Mon Oct  3 01:12:45 2011] fullrun_ccd0_acisf04497_pi14-548_cl_pass1_src10_1.ximg exists
[Mon Oct  3 01:12:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04497_pi14-548_cl_pass1_src10.csv
[Mon Oct  3 01:12:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04497_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04497_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 01:12:45 2011] fullrun_ccd0_acisf04497_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Mon Oct  3 01:12:45 2011] fullrun_ccd0_acisf04497_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Oct  3 01:12:45 2011] Fit fullrun_ccd0_acisf04497_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Oct  3 01:12:54 2011] Spatial fit model total counts = 175.808000, observed total counts = 174.000000
[Mon Oct  3 01:12:54 2011] Offset between fit and detection position for source 23 = 0.268578 pixels
[Mon Oct  3 01:12:54 2011] 176.190000 total counts/ 34.076000 bgd. counts: snr = 24.345156
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.268578 pixels
  Position = (1129.6, 646.8) = 3 25 4.76 30 38 57.9
  Extent = 3.4 (2.4-4.0)", rotation angle = 0
  Source counts = 142.1 +/- 13.3
  Background counts = 34.1
  Rate = 0.002 +/- 0.0002
[Mon Oct  3 01:12:54 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 01:12:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 01:12:54 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 01:12:54 2011] Source does appear to be extended
[Mon Oct  3 01:12:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 01:13:20 2011] Not overwriting source region fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23_src.reg
[Mon Oct  3 01:13:20 2011] Extracting stamp from image fullrun_ccd0_acisf04497_pi14-548_cl_sm2.00.img.gz, (975, 492) - (1284, 802)
[Mon Oct  3 01:13:20 2011] Writing fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23.gif
[Mon Oct  3 01:13:51 2011] ../../acisf04497/products/events/fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23_src.evt and ../../acisf04497/products/events/fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Mon Oct  3 01:13:51 2011] Size of ../../acisf04497/products/events/fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23_src.evt.gz[events] = 171 counts
[Mon Oct  3 01:13:51 2011] Mean chipx,y = (70.84, 672.56)
[Mon Oct  3 01:13:51 2011] Mean tdetx,y = (3733.56, 5061.16)
[Mon Oct  3 01:13:51 2011] chipx,y range = (40.00-109.00, 637.00-703.00)
[Mon Oct  3 01:13:51 2011] Size of ../../acisf04497/products/events/fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 374 counts
[Mon Oct  3 01:13:51 2011] ../../acisf04497/products/images/fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23_src.img and ../../acisf04497/products/images/fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Mon Oct  3 01:13:51 2011] ../../acisf04497/products/spectra/fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23_src.pi and ../../acisf04497/products/spectra/fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Mon Oct  3 01:13:54 2011] ../../acisf04497/products/lightcurves/fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23_src.lc and ../../acisf04497/products/lightcurves/fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Mon Oct  3 01:14:01 2011] Keeping rmf generated by specextract
[Mon Oct  3 01:14:01 2011] 167.476
[Mon Oct  3 01:17:57 2011] Updating aperture counts using extracted products
[Mon Oct  3 01:17:57 2011] Error reading totcts from fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23_src.pi.gz
[Mon Oct  3 01:17:57 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 01:17:57 2011] Using photon index=1.80, rate=0.00209, arf fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23.arf
[Mon Oct  3 01:17:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 01:17:57 2011] Updating source flux to 2.7e-14
[Mon Oct  3 01:18:08 2011] Reading fit data from acisf04497/analysis//spectral/fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23_pl.csv
[Mon Oct  3 01:18:08 2011] Spectral fit parameter nH value = 1.40199e+21
[Mon Oct  3 01:18:08 2011] Spectral fit parameter PhoIndex value = 3.16598
[Mon Oct  3 01:18:08 2011] Failed to get F(0.3-8.0) from acisf04497/analysis//spectral/fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23_pl.csv, possibly due to different flux energy range selected
[Mon Oct  3 01:18:08 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 01:18:08 2011] Using Nh = 1.4e+21, photon index=3.17, rate=0.00209, arf fullrun_ccd0_acisf04497_pi14-548_pass1_cl_src23.arf
[Mon Oct  3 01:18:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 01:18:08 2011] Updating source flux to 2.3e-14