[Mon Sep 26 13:48:01 2011] Detection parameters:
  Position = (633.4, 692.8) = 11 11 51.08 -61 24 31.2
  Extent = 1.5" x 1.0", rotation angle = 162 degrees
  Source counts = 10.9 +/- 3.7
  Background counts = 3.1
  Rate = 0.0003 +/- 9e-05

[Mon Sep 26 13:48:01 2011] Off-axis axis estimate = 6.01'
[Mon Sep 26 13:50:15 2011] Using EEF radius (= 1.64 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 13:50:15 2011] Initial guess for spatial extent in simple fitting = 1.64"
[Mon Sep 26 13:50:15 2011] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.956
[Mon Sep 26 13:50:15 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 1.64"
[Mon Sep 26 13:50:17 2011] fullrun_ccd2_acisf04496_pi14-548_cl_pass0_src37.ximg exists
[Mon Sep 26 13:50:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04496_pi14-548_cl_pass0_src37.csv
[Mon Sep 26 13:50:17 2011] fullrun_ccd2_acisf04496_pi14-548_cl_pass0_src37_1.ximg exists
[Mon Sep 26 13:50:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04496_pi14-548_cl_pass0_src37.csv
[Mon Sep 26 13:50:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04496_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04496_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 13:50:19 2011] fullrun_ccd2_acisf04496_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Mon Sep 26 13:50:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04496_pi14-548_cl_pass0_tfrozen_src37.csv
[Mon Sep 26 13:50:19 2011] fullrun_ccd2_acisf04496_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Mon Sep 26 13:50:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04496_pi14-548_cl_pass0_tfrozen_src37.csv
[Mon Sep 26 13:50:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04496_pi14-548_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04496_pi14-548_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 13:51:08 2011] Spatial fit model total counts = 13.628800, observed total counts = 15.000000
[Mon Sep 26 13:51:08 2011] Offset between fit and detection position for source 71 = 1.468039 pixels
[Mon Sep 26 13:51:08 2011] 13.581440 total counts/ 3.365640 bgd. counts: snr = 5.568504
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 1.468039 pixels
  Position = (633.1, 694.2) = 11 11 51.14 -61 24 30.7
  Extent = 1.5 (1.2-3.0)" x 0.8 (0.5-1.4)", rotation angle = 17
  Source counts = 10.2 +/- 3.7
  Background counts = 3.4
  Rate = 0.0003 +/- 9e-05
[Mon Sep 26 13:51:08 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 13:51:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 13:51:08 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 13:51:08 2011] Source does appear to be extended
[Mon Sep 26 13:51:08 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89
[Mon Sep 26 13:52:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 13:52:03 2011] Initial guess for spatial extent in simple fitting = 1.14"
[Mon Sep 26 13:52:03 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.137
[Mon Sep 26 13:52:03 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 1.14"
[Mon Sep 26 13:52:05 2011] fullrun_ccd2_acisf04496_pi14-548_cl_pass1_src37.ximg exists
[Mon Sep 26 13:52:05 2011] fullrun_ccd2_acisf04496_pi14-548_cl_pass1_src37_1.ximg exists
[Mon Sep 26 13:52:05 2011] Fit fullrun_ccd2_acisf04496_pi14-548_cl_pass1_src37 appears to have run properly
[Mon Sep 26 13:52:08 2011] fullrun_ccd2_acisf04496_pi14-548_cl_pass1_tfrozen_src37.ximg exists
[Mon Sep 26 13:52:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04496_pi14-548_cl_pass1_tfrozen_src37.csv
[Mon Sep 26 13:52:08 2011] fullrun_ccd2_acisf04496_pi14-548_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Sep 26 13:52:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04496_pi14-548_cl_pass1_tfrozen_src37.csv
[Mon Sep 26 13:52:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04496_pi14-548_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04496_pi14-548_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 13:52:41 2011] Spatial fit model total counts = 12.606100, observed total counts = 14.000000
[Mon Sep 26 13:52:41 2011] Offset between fit and detection position for source 71 = 2.019646 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 2.019646 pixels
  Position = (631.1, 694.7) = 11 11 51.27 -61 24 30.5
  Extent = 1.7 (0.9-2.3)", rotation angle = 0
  Source counts = 12.8 +/- 3.6
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Mon Sep 26 13:52:41 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 13:52:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 13:52:41 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 13:52:41 2011] Source does appear to be extended
[Mon Sep 26 13:52:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 14:07:44 2011] Not overwriting source region fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71_src.reg
[Mon Sep 26 14:07:44 2011] Extracting stamp from image fullrun_ccd2_acisf04496_pi14-548_cl_sm2.00.img.gz, (554, 618) - (708, 772)
[Mon Sep 26 14:07:44 2011] Writing fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71.gif
[Mon Sep 26 14:12:51 2011] ../../acisf04496/products/events/fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71_src.evt and ../../acisf04496/products/events/fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71_bgd.evt exist, delete to re-create
[Mon Sep 26 14:12:51 2011] Size of ../../acisf04496/products/events/fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71_src.evt.gz[events] = 19 counts
[Mon Sep 26 14:12:51 2011] Mean chipx,y = (596.47, 556.84)
[Mon Sep 26 14:12:51 2011] Mean tdetx,y = (3617.84, 3489.53)
[Mon Sep 26 14:12:51 2011] chipx,y range = (581.00-611.00, 533.00-580.00)
[Mon Sep 26 14:12:51 2011] Size of ../../acisf04496/products/events/fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71_bgd.evt.gz[events] = 66 counts
[Mon Sep 26 14:12:51 2011] ../../acisf04496/products/images/fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71_src.img and ../../acisf04496/products/images/fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71_bgd.img exist, delete to re-create
[Mon Sep 26 14:12:51 2011] Not generating rmf since there are only 12 counts
[Mon Sep 26 14:12:51 2011] arf not found, will run specextract
[Mon Sep 26 14:12:52 2011] ../../acisf04496/products/spectra/fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71_bkg.pi not found
[Mon Sep 26 14:12:52 2011] ../../acisf04496/products/spectra/fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71.warf not found
[Mon Sep 26 14:12:52 2011] ../../acisf04496/products/spectra/fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71.wrmf not found
[Mon Sep 26 14:12:52 2011] Removal of ../../acisf04496/products/spectra/fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71.soff failed
[Mon Sep 26 14:12:52 2011] Failed to rename ../../acisf04496/products/spectra/fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71_grp.pi to ../../acisf04496/products/spectra/fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71_src.pi
[Mon Sep 26 14:12:58 2011] ../../acisf04496/products/lightcurves/fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71_src.lc and ../../acisf04496/products/lightcurves/fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71_bgd.lc exist, delete to re-create
[Mon Sep 26 14:17:02 2011] No arf file found
[Mon Sep 26 14:34:58 2011] Updating aperture counts using extracted products
[Mon Sep 26 14:34:58 2011] Error reading totcts from fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71_src.pi
[Mon Sep 26 14:34:58 2011] No arf file for this source, not re-computing flux
[Mon Sep 26 14:35:13 2011] Source 71 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep 26 14:35:14 2011] acisf04496/analysis//spectral/fullrun_ccd2_acisf04496_pi14-548_pass1_cl_src71_pl.csv not found, spectral fit skipped or did not complete