[Tue Oct  4 03:54:07 2011] Detection parameters:
  Position = (261.1, 681.3) = 10 43 38.78 -59 34 23.9
  Extent = 0.6" x 0.5", rotation angle = 4 degrees
  Source counts = 84.2 +/- 9.7
  Background counts = 10.8
  Rate = 0.001 +/- 0.0002

[Tue Oct  4 03:54:18 2011] Off-axis axis estimate = 2.76'
[Tue Oct  4 03:58:26 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 03:58:26 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Tue Oct  4 03:58:26 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.893
[Tue Oct  4 03:58:26 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.53"
[Tue Oct  4 03:58:27 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass0_src21.ximg exists
[Tue Oct  4 03:58:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04495_pi14-548_cl_pass0_src21.csv
[Tue Oct  4 03:58:27 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass0_src21_1.ximg exists
[Tue Oct  4 03:58:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04495_pi14-548_cl_pass0_src21.csv
[Tue Oct  4 03:58:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04495_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04495_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 03:58:34 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Tue Oct  4 03:58:34 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Oct  4 03:58:34 2011] Fit fullrun_ccd2_acisf04495_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Oct  4 03:59:45 2011] Spatial fit model total counts = 104.977000, observed total counts = 105.000000
[Tue Oct  4 03:59:45 2011] Offset between fit and detection position for source 15 = 0.509639 pixels
[Tue Oct  4 03:59:45 2011] 107.519100 total counts/ 37.318300 bgd. counts: snr = 11.491617
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.509639 pixels
  Position = (261.3, 681.8) = 10 43 38.80 -59 34 23.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 70.2 +/- 10.4
  Background counts = 37.3
  Rate = 0.001 +/- 0.0002
[Tue Oct  4 03:59:46 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 03:59:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 03:59:46 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 03:59:46 2011] Source does appear to be extended
[Tue Oct  4 03:59:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 04:01:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 04:01:21 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Tue Oct  4 04:01:21 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.994
[Tue Oct  4 04:01:21 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 0.49"
[Tue Oct  4 04:01:22 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass1_src21.ximg exists
[Tue Oct  4 04:01:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04495_pi14-548_cl_pass1_src21.csv
[Tue Oct  4 04:01:22 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass1_src21_1.ximg exists
[Tue Oct  4 04:01:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04495_pi14-548_cl_pass1_src21.csv
[Tue Oct  4 04:01:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04495_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04495_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 04:01:25 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Tue Oct  4 04:01:25 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Oct  4 04:01:25 2011] Fit fullrun_ccd2_acisf04495_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Tue Oct  4 04:02:37 2011] Spatial fit model total counts = 106.984000, observed total counts = 105.000000
[Tue Oct  4 04:02:37 2011] Offset between fit and detection position for source 15 = 0.007962 pixels
[Tue Oct  4 04:02:37 2011] 109.628700 total counts/ 38.316500 bgd. counts: snr = 11.520489
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.007962 pixels
  Position = (261.3, 681.8) = 10 43 38.80 -59 34 23.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 71.3 +/- 10.5
  Background counts = 38.3
  Rate = 0.001 +/- 0.0002
[Tue Oct  4 04:02:38 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 04:02:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 04:02:38 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 04:02:38 2011] Source does appear to be extended
[Tue Oct  4 04:02:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 04:23:24 2011] Not overwriting source region fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src15_src.reg
[Tue Oct  4 04:23:24 2011] Extracting stamp from image fullrun_ccd2_acisf04495_pi14-548_cl_sm2.00.img.gz, (239, 659) - (284, 704)
[Tue Oct  4 04:23:24 2011] Writing fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src15.gif
[Tue Oct  4 04:24:55 2011] ../../acisf04495/products/events/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src15_src.evt and ../../acisf04495/products/events/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Tue Oct  4 04:24:55 2011] Size of ../../acisf04495/products/events/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src15_src.evt.gz[events] = 81 counts
[Tue Oct  4 04:24:55 2011] Mean chipx,y = (352.74, 886.05)
[Tue Oct  4 04:24:55 2011] Mean tdetx,y = (3947.05, 3733.26)
[Tue Oct  4 04:24:55 2011] chipx,y range = (334.00-369.00, 869.00-907.00)
[Tue Oct  4 04:24:55 2011] Size of ../../acisf04495/products/events/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 35 counts
[Tue Oct  4 04:24:55 2011] ../../acisf04495/products/images/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src15_src.img and ../../acisf04495/products/images/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Tue Oct  4 04:24:55 2011] ../../acisf04495/products/spectra/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src15_src.pi and ../../acisf04495/products/spectra/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Tue Oct  4 04:24:55 2011] Not generating rmf since there are only 71 counts
[Tue Oct  4 04:24:58 2011] ../../acisf04495/products/lightcurves/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src15_src.lc and ../../acisf04495/products/lightcurves/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Tue Oct  4 04:35:04 2011] 194.543
[Tue Oct  4 06:35:55 2011] Updating aperture counts using extracted products
[Tue Oct  4 06:35:55 2011] Error reading totcts from fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src15_src.pi.gz
[Tue Oct  4 06:36:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 06:36:07 2011] Using photon index=1.80, rate=0.00124, arf fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src15.arf
[Tue Oct  4 06:36:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct  4 06:36:07 2011] Updating source flux to 2e-14
[Tue Oct  4 06:39:15 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting