[Tue Oct  4 03:54:06 2011] Detection parameters:
  Position = (102.4, 914.6) = 10 43 49.07 -59 32 29.2
  Extent = 0.5" x 0.5", rotation angle = 118 degrees
  Source counts = 289.5 +/- 17.3
  Background counts = 10.5
  Rate = 0.005 +/- 0.0003

[Tue Oct  4 03:54:18 2011] Off-axis axis estimate = 0.89'
[Tue Oct  4 03:58:26 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 03:58:26 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Oct  4 03:58:26 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.387
[Tue Oct  4 03:58:26 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Tue Oct  4 03:58:27 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct  4 03:58:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04495_pi14-548_cl_pass0_src1.csv
[Tue Oct  4 03:58:27 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct  4 03:58:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04495_pi14-548_cl_pass0_src1.csv
[Tue Oct  4 03:58:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04495_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04495_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 03:58:33 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct  4 03:58:33 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct  4 03:58:33 2011] Fit fullrun_ccd2_acisf04495_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct  4 03:59:45 2011] Spatial fit model total counts = 333.009000, observed total counts = 339.000000
[Tue Oct  4 03:59:45 2011] Offset between fit and detection position for source 1 = 0.177441 pixels
[Tue Oct  4 03:59:45 2011] 358.470000 total counts/ 219.114000 bgd. counts: snr = 9.414356
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.177441 pixels
  Position = (102.5, 914.5) = 10 43 49.09 -59 32 29.5
  Extent = 0.1" x 0.1", rotation angle = 0
  Source counts = 139.4 +/- 18.9
  Background counts = 219.1
  Rate = 0.002 +/- 0.0003
[Tue Oct  4 03:59:46 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 03:59:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 03:59:46 2011] Assessing source extent using major
[Tue Oct  4 03:59:46 2011] Source does appear to be extended
[Tue Oct  4 03:59:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 04:01:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 04:01:21 2011] Initial guess for spatial extent in simple fitting = 0.10"
[Tue Oct  4 04:01:21 2011] source mask rpix=0.2, npix_max = 1, mask sum = 1, frac = 0.520
[Tue Oct  4 04:01:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.10"
[Tue Oct  4 04:01:22 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct  4 04:01:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04495_pi14-548_cl_pass1_src1.csv
[Tue Oct  4 04:01:22 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct  4 04:01:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04495_pi14-548_cl_pass1_src1.csv
[Tue Oct  4 04:01:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04495_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04495_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 04:01:24 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct  4 04:01:24 2011] fullrun_ccd2_acisf04495_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct  4 04:01:24 2011] Fit fullrun_ccd2_acisf04495_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct  4 04:02:37 2011] Spatial fit model total counts = 333.548000, observed total counts = 339.000000
[Tue Oct  4 04:02:37 2011] Offset between fit and detection position for source 1 = 0.014846 pixels
[Tue Oct  4 04:02:37 2011] 359.062000 total counts/ 219.702000 bgd. counts: snr = 9.402019
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014846 pixels
  Position = (102.5, 914.5) = 10 43 49.09 -59 32 29.5
  Extent = 0.1 (0.1-0.1)", rotation angle = 0
  Source counts = 139.4 +/- 18.9
  Background counts = 219.7
  Rate = 0.002 +/- 0.0003
[Tue Oct  4 04:02:38 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 04:02:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 04:02:38 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 04:02:38 2011] Source does appear to be extended
[Tue Oct  4 04:02:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 04:23:23 2011] Not overwriting source region fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1_src.reg
[Tue Oct  4 04:23:23 2011] Extracting stamp from image fullrun_ccd2_acisf04495_pi14-548_cl_sm2.00.img.gz, (99, 911) - (106, 918)
[Tue Oct  4 04:23:23 2011] Writing fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1.gif
[Tue Oct  4 04:23:53 2011] ../../acisf04495/products/events/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1_src.evt and ../../acisf04495/products/events/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Oct  4 04:23:53 2011] Size of ../../acisf04495/products/events/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1_src.evt.gz[events] = 70 counts
[Tue Oct  4 04:23:53 2011] Mean chipx,y = (76.29, 956.59)
[Tue Oct  4 04:23:53 2011] Mean tdetx,y = (4017.59, 4009.71)
[Tue Oct  4 04:23:53 2011] chipx,y range = (60.00-95.00, 940.00-972.00)
[Tue Oct  4 04:23:53 2011] Size of ../../acisf04495/products/events/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 78 counts
[Tue Oct  4 04:23:53 2011] ../../acisf04495/products/images/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1_src.img and ../../acisf04495/products/images/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Oct  4 04:23:53 2011] ../../acisf04495/products/spectra/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1_src.pi and ../../acisf04495/products/spectra/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Oct  4 04:23:57 2011] ../../acisf04495/products/lightcurves/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1_src.lc and ../../acisf04495/products/lightcurves/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Oct  4 04:35:03 2011] Keeping rmf generated by specextract
[Tue Oct  4 04:35:03 2011] 204.034
[Tue Oct  4 06:35:54 2011] Updating aperture counts using extracted products
[Tue Oct  4 06:35:54 2011] Error reading totcts from fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Oct  4 06:36:06 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 06:36:06 2011] Using photon index=1.80, rate=0.00243, arf fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1.arf
[Tue Oct  4 06:36:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct  4 06:36:06 2011] Updating source flux to 3.7e-14
[Tue Oct  4 06:40:36 2011] Reading fit data from acisf04495/analysis//spectral/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1_pl.csv
[Tue Oct  4 06:40:36 2011] Spectral fit parameter nH value = 2.17049e+21
[Tue Oct  4 06:40:36 2011] Spectral fit parameter PhoIndex value = 2.03998
[Tue Oct  4 06:40:36 2011] Failed to get F(0.3-8.0) from acisf04495/analysis//spectral/fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Oct  4 06:40:36 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 06:40:36 2011] Using Nh = 2.2e+21, photon index=2.04, rate=0.00243, arf fullrun_ccd2_acisf04495_pi14-548_pass1_cl_src1.arf
[Tue Oct  4 06:40:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct  4 06:40:36 2011] Updating source flux to 2.4e-14