[Tue Oct 18 10:27:56 2011] Detection parameters:
  Position = (307.4, 266.3) = 13 52 57.69 -66 14 25.8
  Extent = 2.9" x 1.9", rotation angle = 101 degrees
  Source counts = 22.1 +/- 5.6
  Background counts = 8.9
  Rate = 0.0008 +/- 0.0002

[Tue Oct 18 10:27:56 2011] Off-axis axis estimate = 9.23'
[Tue Oct 18 10:28:45 2011] Using EEF radius (= 3.76 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 10:28:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 10:28:45 2011] Initial guess for spatial extent in simple fitting = 3.76"
[Tue Oct 18 10:28:45 2011] source mask rpix=7.6, npix_max = 265, mask sum = 272, frac = 1.024
[Tue Oct 18 10:28:45 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.76"
[Tue Oct 18 10:28:46 2011] fullrun_ccd2_acisf04480_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct 18 10:28:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04480_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 10:28:46 2011] fullrun_ccd2_acisf04480_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct 18 10:28:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04480_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 10:28:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04480_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04480_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 10:28:46 2011] fullrun_ccd2_acisf04480_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct 18 10:28:46 2011] fullrun_ccd2_acisf04480_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct 18 10:28:46 2011] Fit fullrun_ccd2_acisf04480_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct 18 10:28:53 2011] Spatial fit model total counts = 54.379000, observed total counts = 50.000000
[Tue Oct 18 10:28:53 2011] Offset between fit and detection position for source 1 = 1.091883 pixels
[Tue Oct 18 10:28:53 2011] 54.329700 total counts/ 26.169700 bgd. counts: snr = 5.504695
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.091883 pixels
  Position = (306.5, 265.7) = 13 52 57.81 -66 14 26.4
  Extent = 3.3 (1.8-4.9)", rotation angle = 0
  Source counts = 28.2 +/- 7.4
  Background counts = 26.2
  Rate = 0.001 +/- 0.0003
[Tue Oct 18 10:28:53 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 10:28:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 10:28:53 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 10:28:53 2011] Source does appear to be extended
[Tue Oct 18 10:28:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 10:29:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 10:29:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 10:29:15 2011] Initial guess for spatial extent in simple fitting = 3.30"
[Tue Oct 18 10:29:15 2011] source mask rpix=6.7, npix_max = 207, mask sum = 225, frac = 1.083
[Tue Oct 18 10:29:15 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.30"
[Tue Oct 18 10:29:15 2011] fullrun_ccd2_acisf04480_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct 18 10:29:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04480_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 10:29:15 2011] fullrun_ccd2_acisf04480_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct 18 10:29:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04480_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 10:29:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04480_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04480_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 10:29:15 2011] fullrun_ccd2_acisf04480_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct 18 10:29:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04480_pi14-548_cl_pass1_tfrozen_src1.csv
[Tue Oct 18 10:29:15 2011] fullrun_ccd2_acisf04480_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct 18 10:29:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04480_pi14-548_cl_pass1_tfrozen_src1.csv
[Tue Oct 18 10:29:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04480_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04480_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 10:29:25 2011] Spatial fit model total counts = 52.812900, observed total counts = 45.000000
[Tue Oct 18 10:29:25 2011] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Oct 18 10:29:25 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 10:29:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 10:29:25 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 10:29:25 2011] Source does appear to be extended
[Tue Oct 18 10:29:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 10:29:47 2011] Not overwriting source region fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1_src.reg
[Tue Oct 18 10:29:47 2011] Extracting stamp from image fullrun_ccd2_acisf04480_pi14-548_cl_sm2.00.img.gz, (156, 115) - (457, 417)
[Tue Oct 18 10:29:47 2011] Writing fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1.gif
[Tue Oct 18 10:29:47 2011] ../../acisf04480/products/events/fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1_src.evt and ../../acisf04480/products/events/fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Oct 18 10:29:47 2011] Size of ../../acisf04480/products/events/fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1_src.evt.gz[events] = 41 counts
[Tue Oct 18 10:29:47 2011] Mean chipx,y = (752.49, 1004.46)
[Tue Oct 18 10:29:47 2011] Mean tdetx,y = (4065.46, 3333.51)
[Tue Oct 18 10:29:47 2011] chipx,y range = (722.00-785.00, 980.00-1022.00)
[Tue Oct 18 10:29:47 2011] Size of ../../acisf04480/products/events/fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 106 counts
[Tue Oct 18 10:29:47 2011] ../../acisf04480/products/images/fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1_src.img and ../../acisf04480/products/images/fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Oct 18 10:29:47 2011] Not generating rmf since there are only 28 counts
[Tue Oct 18 10:29:47 2011] arf not found, will run specextract
[Tue Oct 18 10:29:49 2011] ../../acisf04480/products/spectra/fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1_bkg.pi not found
[Tue Oct 18 10:29:49 2011] ../../acisf04480/products/spectra/fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1.warf not found
[Tue Oct 18 10:29:49 2011] ../../acisf04480/products/spectra/fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1.wrmf not found
[Tue Oct 18 10:29:49 2011] Removal of ../../acisf04480/products/spectra/fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1.soff failed
[Tue Oct 18 10:29:49 2011] Failed to rename ../../acisf04480/products/spectra/fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1_grp.pi to ../../acisf04480/products/spectra/fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1_src.pi
[Tue Oct 18 10:29:54 2011] ../../acisf04480/products/lightcurves/fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1_src.lc and ../../acisf04480/products/lightcurves/fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Oct 18 10:30:10 2011] No arf file found
[Tue Oct 18 10:37:15 2011] Updating aperture counts using extracted products
[Tue Oct 18 10:37:15 2011] Error reading totcts from fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1_src.pi
[Tue Oct 18 10:37:15 2011] No arf file for this source, not re-computing flux
[Tue Oct 18 10:37:19 2011] Flag p found in src. 1 procflags, skipping spectral fitting
[Tue Oct 18 10:37:19 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 18 10:37:20 2011] acisf04480/analysis//spectral/fullrun_ccd2_acisf04480_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete