[Sat Oct  1 10:41:57 2011] Detection parameters:
  Position = (138.2, 896.6) = 6 33 24.77 22 32 7.4
  Extent = 0.7" x 0.5", rotation angle = 115 degrees
  Source counts = 870.5 +/- 29.6
  Background counts = 5.5
  Rate = 0.02 +/- 0.0008

[Sat Oct  1 10:41:58 2011] Off-axis axis estimate = 3.19'
[Sat Oct  1 10:42:30 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 10:42:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 10:42:30 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sat Oct  1 10:42:30 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.970
[Sat Oct  1 10:42:30 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.62"
[Sat Oct  1 10:42:31 2011] fullrun_ccd6_acisf04467_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  1 10:42:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04467_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 10:42:31 2011] fullrun_ccd6_acisf04467_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  1 10:42:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04467_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 10:42:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf04467_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf04467_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 10:42:32 2011] fullrun_ccd6_acisf04467_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  1 10:42:32 2011] fullrun_ccd6_acisf04467_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  1 10:42:32 2011] Fit fullrun_ccd6_acisf04467_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  1 10:42:39 2011] Spatial fit model total counts = 876.741000, observed total counts = 877.000000
[Sat Oct  1 10:42:39 2011] Offset between fit and detection position for source 1 = 0.684130 pixels
[Sat Oct  1 10:42:39 2011] 877.858300 total counts/ 16.371300 bgd. counts: snr = 212.915434
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.684130 pixels
  Position = (138.7, 897.1) = 6 33 24.77 22 32 7.4
  Extent = 0.8 (0.8-0.8)", rotation angle = 0
  Source counts = 861.5 +/- 29.6
  Background counts = 16.4
  Rate = 0.02 +/- 0.0008
[Sat Oct  1 10:42:39 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 10:42:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 10:42:39 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 10:42:39 2011] Source does appear to be extended
[Sat Oct  1 10:42:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 10:42:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 10:42:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 10:42:58 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Sat Oct  1 10:42:58 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881
[Sat Oct  1 10:42:58 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.80"
[Sat Oct  1 10:42:59 2011] fullrun_ccd6_acisf04467_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  1 10:42:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04467_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 10:42:59 2011] fullrun_ccd6_acisf04467_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  1 10:42:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04467_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 10:42:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf04467_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf04467_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 10:42:59 2011] fullrun_ccd6_acisf04467_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  1 10:42:59 2011] fullrun_ccd6_acisf04467_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  1 10:42:59 2011] Fit fullrun_ccd6_acisf04467_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  1 10:43:05 2011] Spatial fit model total counts = 873.334000, observed total counts = 877.000000
[Sat Oct  1 10:43:05 2011] Offset between fit and detection position for source 1 = 0.021995 pixels
[Sat Oct  1 10:43:05 2011] 872.487580 total counts/ 8.163580 bgd. counts: snr = 302.507569
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.021995 pixels
  Position = (138.7, 897.1) = 6 33 24.77 22 32 7.4
  Extent = 0.8 (0.8-0.8)", rotation angle = 0
  Source counts = 864.3 +/- 29.5
  Background counts = 8.2
  Rate = 0.02 +/- 0.0008
[Sat Oct  1 10:43:05 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 10:43:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 10:43:05 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 10:43:05 2011] Source does appear to be extended
[Sat Oct  1 10:43:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 10:43:50 2011] Not overwriting source region fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1_src.reg
[Sat Oct  1 10:43:50 2011] Extracting stamp from image fullrun_ccd6_acisf04467_pi14-548_cl_sm2.00.img.gz, (101, 860) - (176, 934)
[Sat Oct  1 10:43:50 2011] Writing fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1.gif
[Sat Oct  1 10:43:51 2011] ../../acisf04467/products/events/fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1_src.evt and ../../acisf04467/products/events/fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct  1 10:43:51 2011] Size of ../../acisf04467/products/events/fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1_src.evt.gz[events] = 876 counts
[Sat Oct  1 10:43:51 2011] Mean chipx,y = (885.68, 379.75)
[Sat Oct  1 10:43:51 2011] Mean tdetx,y = (3760.68, 2081.75)
[Sat Oct  1 10:43:51 2011] chipx,y range = (863.00-906.00, 361.00-400.00)
[Sat Oct  1 10:43:51 2011] Size of ../../acisf04467/products/events/fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 32 counts
[Sat Oct  1 10:43:51 2011] ../../acisf04467/products/images/fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1_src.img and ../../acisf04467/products/images/fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct  1 10:43:51 2011] ../../acisf04467/products/spectra/fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1_src.pi and ../../acisf04467/products/spectra/fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct  1 10:43:57 2011] ../../acisf04467/products/lightcurves/fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1_src.lc and ../../acisf04467/products/lightcurves/fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct  1 10:44:35 2011] Keeping rmf generated by specextract
[Sat Oct  1 10:44:35 2011] 212.774
[Sat Oct  1 10:45:37 2011] Updating aperture counts using extracted products
[Sat Oct  1 10:45:37 2011] Error reading totcts from fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct  1 10:45:37 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 10:45:37 2011] Using photon index=1.80, rate=0.0238, arf fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1.arf
[Sat Oct  1 10:45:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 10:45:37 2011] Updating source flux to 2.5e-13
[Sat Oct  1 10:46:12 2011] Reading fit data from acisf04467/analysis//spectral/fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct  1 10:46:12 2011] Spectral fit parameter nH value = 1.04321e+22
[Sat Oct  1 10:46:12 2011] Spectral fit parameter PhoIndex value = 9.956
[Sat Oct  1 10:46:12 2011] Failed to get F(0.3-8.0) from acisf04467/analysis//spectral/fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct  1 10:46:12 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 10:46:12 2011] Using Nh = 1e+22, photon index=9.96, rate=0.0238, arf fullrun_ccd6_acisf04467_pi14-548_pass1_cl_src1.arf
[Sat Oct  1 10:46:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 10:46:12 2011] Updating source flux to 1.4e-13