[Mon Oct  3 14:02:09 2011] Detection parameters:
  Position = (321.8, 949.6) = 12 42 52.29 2 42 5.1
  Extent = 0.6" x 0.5", rotation angle = 24 degrees
  Source counts = 28.2 +/- 7.6
  Background counts = 29.8
  Rate = 0.0004 +/- 0.0001

[Mon Oct  3 14:02:09 2011] Off-axis axis estimate = 0.86'
[Mon Oct  3 14:03:50 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 14:03:50 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct  3 14:03:50 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.924
[Mon Oct  3 14:03:50 2011] Giving source the simple spatial ID 48 for pass 0, mean size = 0.38"
[Mon Oct  3 14:03:54 2011] fullrun_ccd3_acisf04415_pi14-548_cl_pass0_src48.ximg exists
[Mon Oct  3 14:03:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04415_pi14-548_cl_pass0_src48.csv
[Mon Oct  3 14:03:54 2011] fullrun_ccd3_acisf04415_pi14-548_cl_pass0_src48_1.ximg exists
[Mon Oct  3 14:03:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04415_pi14-548_cl_pass0_src48.csv
[Mon Oct  3 14:03:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04415_pi14-548_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04415_pi14-548_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 14:03:55 2011] fullrun_ccd3_acisf04415_pi14-548_cl_pass0_tfrozen_src48.ximg exists
[Mon Oct  3 14:03:55 2011] fullrun_ccd3_acisf04415_pi14-548_cl_pass0_tfrozen_src48_1.ximg exists
[Mon Oct  3 14:03:55 2011] Fit fullrun_ccd3_acisf04415_pi14-548_cl_pass0_tfrozen_src48 appears to have run properly
[Mon Oct  3 14:04:33 2011] Spatial fit model total counts = 211.111000, observed total counts = 213.000000
[Mon Oct  3 14:04:33 2011] Offset between fit and detection position for source 91 = 3.308180 pixels
[Mon Oct  3 14:04:33 2011] 205.514700 total counts/ 177.035000 bgd. counts: snr = 2.140454
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 3.308180 pixels
  Position = (324.8, 951.0) = 12 42 52.20 2 42 5.5
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 28.5 +/- 14.3
  Background counts = 177.0
  Rate = 0.0004 +/- 0.0002
[Mon Oct  3 14:04:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 14:04:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 14:04:33 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 14:04:33 2011] Source does appear to be extended
[Mon Oct  3 14:04:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 14:05:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 14:05:43 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Mon Oct  3 14:05:43 2011] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.112
[Mon Oct  3 14:05:43 2011] Giving source the simple spatial ID 46 for pass 1, mean size = 1.50"
[Mon Oct  3 14:05:44 2011] fullrun_ccd3_acisf04415_pi14-548_cl_pass1_src46.ximg exists
[Mon Oct  3 14:05:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04415_pi14-548_cl_pass1_src46.csv
[Mon Oct  3 14:05:44 2011] fullrun_ccd3_acisf04415_pi14-548_cl_pass1_src46_1.ximg exists
[Mon Oct  3 14:05:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04415_pi14-548_cl_pass1_src46.csv
[Mon Oct  3 14:05:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04415_pi14-548_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04415_pi14-548_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 14:05:45 2011] fullrun_ccd3_acisf04415_pi14-548_cl_pass1_tfrozen_src46.ximg exists
[Mon Oct  3 14:05:45 2011] fullrun_ccd3_acisf04415_pi14-548_cl_pass1_tfrozen_src46_1.ximg exists
[Mon Oct  3 14:05:45 2011] Fit fullrun_ccd3_acisf04415_pi14-548_cl_pass1_tfrozen_src46 appears to have run properly
[Mon Oct  3 14:06:18 2011] Spatial fit model total counts = 269.989000, observed total counts = 270.000000
[Mon Oct  3 14:06:18 2011] Offset between fit and detection position for source 91 = 5.692741 pixels
[Mon Oct  3 14:06:18 2011] 259.746900 total counts/ 182.070000 bgd. counts: snr = 5.756688
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 5.692741 pixels
  Position = (330.4, 949.8) = 12 42 52.02 2 42 5.0
  Extent = 3.0 (2.9-3.0)", rotation angle = 0
  Source counts = 77.7 +/- 16.1
  Background counts = 182.1
  Rate = 0.001 +/- 0.0002
[Mon Oct  3 14:06:18 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 14:06:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 14:06:18 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 14:06:18 2011] Source does appear to be extended
[Mon Oct  3 14:06:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 14:12:37 2011] Not overwriting source region fullrun_ccd3_acisf04415_pi14-548_pass1_cl_src91_src.reg
[Mon Oct  3 14:12:37 2011] Extracting stamp from image fullrun_ccd3_acisf04415_pi14-548_cl_sm2.00.img.gz, (195, 814) - (466, 1086)
[Mon Oct  3 14:12:37 2011] Writing fullrun_ccd3_acisf04415_pi14-548_pass1_cl_src91.gif
[Mon Oct  3 14:15:50 2011] ../../acisf04415/products/events/fullrun_ccd3_acisf04415_pi14-548_pass1_cl_src91_src.evt and ../../acisf04415/products/events/fullrun_ccd3_acisf04415_pi14-548_pass1_cl_src91_bgd.evt exist, delete to re-create
[Mon Oct  3 14:15:50 2011] Size of ../../acisf04415/products/events/fullrun_ccd3_acisf04415_pi14-548_pass1_cl_src91_src.evt.gz[events] = 1207 counts
[Mon Oct  3 14:15:50 2011] Mean chipx,y = (726.02, 892.11)
[Mon Oct  3 14:15:50 2011] Mean tdetx,y = (4239.89, 3787.02)
[Mon Oct  3 14:15:50 2011] chipx,y range = (685.00-763.00, 856.00-935.00)
[Mon Oct  3 14:15:50 2011] Size of ../../acisf04415/products/events/fullrun_ccd3_acisf04415_pi14-548_pass1_cl_src91_bgd.evt.gz[events] = 9010 counts
[Mon Oct  3 14:15:50 2011] ../../acisf04415/products/images/fullrun_ccd3_acisf04415_pi14-548_pass1_cl_src91_src.img and ../../acisf04415/products/images/fullrun_ccd3_acisf04415_pi14-548_pass1_cl_src91_bgd.img exist, delete to re-create
[Mon Oct  3 14:15:50 2011] ../../acisf04415/products/spectra/fullrun_ccd3_acisf04415_pi14-548_pass1_cl_src91_src.pi and ../../acisf04415/products/spectra/fullrun_ccd3_acisf04415_pi14-548_pass1_cl_src91_bgd.pi exist, delete to re-create
[Mon Oct  3 14:15:50 2011] Not generating rmf since there are only 77 counts
[Mon Oct  3 14:15:54 2011] ../../acisf04415/products/lightcurves/fullrun_ccd3_acisf04415_pi14-548_pass1_cl_src91_src.lc and ../../acisf04415/products/lightcurves/fullrun_ccd3_acisf04415_pi14-548_pass1_cl_src91_bgd.lc exist, delete to re-create
[Mon Oct  3 14:16:38 2011] 203.821
[Mon Oct  3 14:16:55 2011] Updating aperture counts using extracted products
[Mon Oct  3 14:16:55 2011] Error reading totcts from fullrun_ccd3_acisf04415_pi14-548_pass1_cl_src91_src.pi.gz
[Mon Oct  3 14:16:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 14:16:55 2011] Using photon index=1.80, rate=0.00104, arf fullrun_ccd3_acisf04415_pi14-548_pass1_cl_src91.arf
[Mon Oct  3 14:16:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 14:16:55 2011] Updating source flux to 1.2e-14
[Mon Oct  3 14:17:27 2011] Source 91 has fewer than 100.000000 counts, skipping spectral fitting