[Wed Oct 26 14:57:02 2011] Detection parameters:
  Position = (629.3, 48.9) = 18 3 56.95 -24 22 8.5
  Extent = 0.5" x 0.5", rotation angle = 1 degrees
  Source counts = 28.7 +/- 5.4
  Background counts = 0.3
  Rate = 0.002 +/- 0.0004

[Wed Oct 26 14:57:10 2011] Off-axis axis estimate = 2.81'
[Wed Oct 26 14:58:42 2011] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 14:58:42 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Wed Oct 26 14:58:42 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.165
[Wed Oct 26 14:58:42 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 0.54"
[Wed Oct 26 14:58:44 2011] fullrun_ccd3_acisf04397_pi14-548_cl_pass0_src30.ximg exists
[Wed Oct 26 14:58:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04397_pi14-548_cl_pass0_src30.csv
[Wed Oct 26 14:58:44 2011] fullrun_ccd3_acisf04397_pi14-548_cl_pass0_src30_1.ximg exists
[Wed Oct 26 14:58:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04397_pi14-548_cl_pass0_src30.csv
[Wed Oct 26 14:58:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04397_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04397_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 14:58:46 2011] fullrun_ccd3_acisf04397_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Wed Oct 26 14:58:46 2011] fullrun_ccd3_acisf04397_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Oct 26 14:58:46 2011] Fit fullrun_ccd3_acisf04397_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Wed Oct 26 14:59:16 2011] Spatial fit model total counts = 28.043000, observed total counts = 29.000000
[Wed Oct 26 14:59:16 2011] Offset between fit and detection position for source 14 = 0.719423 pixels
[Wed Oct 26 14:59:16 2011] 28.043089 total counts/ 0.000089 bgd. counts: snr = 2978.466334
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.719423 pixels
  Position = (629.8, 49.5) = 18 3 56.95 -24 22 8.5
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 28.0 +/- 5.3
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Wed Oct 26 14:59:16 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 14:59:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 14:59:16 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 14:59:16 2011] Source does appear to be extended
[Wed Oct 26 14:59:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:00:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:00:01 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Wed Oct 26 15:00:01 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.072
[Wed Oct 26 15:00:01 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 0.58"
[Wed Oct 26 15:00:03 2011] fullrun_ccd3_acisf04397_pi14-548_cl_pass1_src30.ximg exists
[Wed Oct 26 15:00:03 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf04397_pi14-548_cl_pass1_src30.csv
[Wed Oct 26 15:00:03 2011] fullrun_ccd3_acisf04397_pi14-548_cl_pass1_src30_1.ximg exists
[Wed Oct 26 15:00:03 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf04397_pi14-548_cl_pass1_src30.csv
[Wed Oct 26 15:00:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04397_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04397_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:00:04 2011] fullrun_ccd3_acisf04397_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Wed Oct 26 15:00:04 2011] fullrun_ccd3_acisf04397_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Wed Oct 26 15:00:04 2011] Fit fullrun_ccd3_acisf04397_pi14-548_cl_pass1_tfrozen_src30 appears to have run properly
[Wed Oct 26 15:00:33 2011] Spatial fit model total counts = 27.408300, observed total counts = 29.000000
[Wed Oct 26 15:00:33 2011] Offset between fit and detection position for source 14 = 0.066181 pixels
[Wed Oct 26 15:00:33 2011] 27.408629 total counts/ 0.003629 bgd. counts: snr = 454.915712
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.066181 pixels
  Position = (629.9, 49.5) = 18 3 56.95 -24 22 8.5
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 27.4 +/- 5.2
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Wed Oct 26 15:00:33 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:00:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:00:33 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:00:33 2011] Source does appear to be extended
[Wed Oct 26 15:00:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:07:35 2011] Not overwriting source region fullrun_ccd3_acisf04397_pi14-548_pass1_cl_src14_src.reg
[Wed Oct 26 15:07:35 2011] Extracting stamp from image fullrun_ccd3_acisf04397_pi14-548_cl_sm2.00.img.gz, (603, 23) - (656, 76)
[Wed Oct 26 15:07:35 2011] Writing fullrun_ccd3_acisf04397_pi14-548_pass1_cl_src14.gif
[Wed Oct 26 15:09:00 2011] ../../acisf04397/products/events/fullrun_ccd3_acisf04397_pi14-548_pass1_cl_src14_src.evt and ../../acisf04397/products/events/fullrun_ccd3_acisf04397_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Wed Oct 26 15:09:00 2011] Size of ../../acisf04397/products/events/fullrun_ccd3_acisf04397_pi14-548_pass1_cl_src14_src.evt.gz[events] = 29 counts
[Wed Oct 26 15:09:00 2011] Mean chipx,y = (620.72, 991.93)
[Wed Oct 26 15:09:00 2011] Mean tdetx,y = (4140.07, 3681.72)
[Wed Oct 26 15:09:00 2011] chipx,y range = (605.00-639.00, 979.00-1010.00)
[Wed Oct 26 15:09:00 2011] Size of ../../acisf04397/products/events/fullrun_ccd3_acisf04397_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 3 counts
[Wed Oct 26 15:09:00 2011] ../../acisf04397/products/images/fullrun_ccd3_acisf04397_pi14-548_pass1_cl_src14_src.img and ../../acisf04397/products/images/fullrun_ccd3_acisf04397_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Wed Oct 26 15:09:00 2011] ../../acisf04397/products/spectra/fullrun_ccd3_acisf04397_pi14-548_pass1_cl_src14_src.pi and ../../acisf04397/products/spectra/fullrun_ccd3_acisf04397_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Wed Oct 26 15:09:00 2011] Not generating rmf since there are only 27 counts
[Wed Oct 26 15:09:03 2011] ../../acisf04397/products/lightcurves/fullrun_ccd3_acisf04397_pi14-548_pass1_cl_src14_src.lc and ../../acisf04397/products/lightcurves/fullrun_ccd3_acisf04397_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Wed Oct 26 15:12:03 2011] 194.12
[Wed Oct 26 15:13:05 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:13:05 2011] Error reading totcts from fullrun_ccd3_acisf04397_pi14-548_pass1_cl_src14_src.pi.gz
[Wed Oct 26 15:13:06 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:13:06 2011] Using photon index=1.80, rate=0.00187, arf fullrun_ccd3_acisf04397_pi14-548_pass1_cl_src14.arf
[Wed Oct 26 15:13:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:13:06 2011] Updating source flux to 2.6e-14
[Wed Oct 26 15:13:29 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting