[Wed Oct 26 14:56:52 2011] Detection parameters:
  Position = (150.3, 661.7) = 18 3 36.72 -24 17 25.7
  Extent = 1.0" x 0.7", rotation angle = 23 degrees
  Source counts = 121.4 +/- 11.1
  Background counts = 1.6
  Rate = 0.008 +/- 0.0008

[Wed Oct 26 14:56:54 2011] Off-axis axis estimate = 5.23'
[Wed Oct 26 14:58:37 2011] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 14:58:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 14:58:37 2011] Initial guess for spatial extent in simple fitting = 1.28"
[Wed Oct 26 14:58:37 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Wed Oct 26 14:58:37 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.28"
[Wed Oct 26 14:58:37 2011] fullrun_ccd1_acisf04397_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 26 14:58:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04397_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 14:58:37 2011] fullrun_ccd1_acisf04397_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 26 14:58:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04397_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 14:58:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04397_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04397_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 14:58:38 2011] fullrun_ccd1_acisf04397_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 26 14:58:38 2011] fullrun_ccd1_acisf04397_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 26 14:58:38 2011] Fit fullrun_ccd1_acisf04397_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 26 14:59:01 2011] Spatial fit model total counts = 127.251000, observed total counts = 128.000000
[Wed Oct 26 14:59:01 2011] Offset between fit and detection position for source 1 = 0.609921 pixels
[Wed Oct 26 14:59:01 2011] 128.075660 total counts/ 9.308660 bgd. counts: snr = 38.927114
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.609921 pixels
  Position = (150.7, 662.2) = 18 3 36.72 -24 17 25.8
  Extent = 1.2 (1.0-1.3)", rotation angle = 0
  Source counts = 118.8 +/- 11.3
  Background counts = 9.3
  Rate = 0.008 +/- 0.0008
[Wed Oct 26 14:59:02 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 14:59:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 14:59:02 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 14:59:02 2011] Source does appear to be extended
[Wed Oct 26 14:59:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 14:59:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 14:59:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 14:59:56 2011] Initial guess for spatial extent in simple fitting = 1.16"
[Wed Oct 26 14:59:56 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.107
[Wed Oct 26 14:59:56 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.16"
[Wed Oct 26 14:59:56 2011] fullrun_ccd1_acisf04397_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 26 14:59:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04397_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 14:59:56 2011] fullrun_ccd1_acisf04397_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 26 14:59:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04397_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 14:59:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04397_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04397_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 14:59:57 2011] fullrun_ccd1_acisf04397_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 26 14:59:57 2011] fullrun_ccd1_acisf04397_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 26 14:59:57 2011] Fit fullrun_ccd1_acisf04397_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 26 15:00:19 2011] Spatial fit model total counts = 128.667000, observed total counts = 127.000000
[Wed Oct 26 15:00:19 2011] Offset between fit and detection position for source 1 = 0.023137 pixels
[Wed Oct 26 15:00:19 2011] 129.200910 total counts/ 8.774910 bgd. counts: snr = 40.653592
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.023137 pixels
  Position = (150.7, 662.2) = 18 3 36.72 -24 17 25.8
  Extent = 1.1 (1.0-1.3)", rotation angle = 0
  Source counts = 120.4 +/- 11.4
  Background counts = 8.8
  Rate = 0.008 +/- 0.0008
[Wed Oct 26 15:00:19 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:00:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:00:19 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:00:19 2011] Source does appear to be extended
[Wed Oct 26 15:00:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:02:17 2011] Not overwriting source region fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 26 15:02:17 2011] Extracting stamp from image fullrun_ccd1_acisf04397_pi14-548_cl_sm2.00.img.gz, (98, 610) - (203, 715)
[Wed Oct 26 15:02:17 2011] Writing fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1.gif
[Wed Oct 26 15:02:19 2011] ../../acisf04397/products/events/fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1_src.evt and ../../acisf04397/products/events/fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 26 15:02:19 2011] Size of ../../acisf04397/products/events/fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1_src.evt.gz[events] = 125 counts
[Wed Oct 26 15:02:19 2011] Mean chipx,y = (117.36, 399.52)
[Wed Oct 26 15:02:19 2011] Mean tdetx,y = (4732.48, 4224.36)
[Wed Oct 26 15:02:19 2011] chipx,y range = (94.00-138.00, 379.00-419.00)
[Wed Oct 26 15:02:19 2011] Size of ../../acisf04397/products/events/fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 11 counts
[Wed Oct 26 15:02:19 2011] ../../acisf04397/products/images/fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1_src.img and ../../acisf04397/products/images/fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 26 15:02:19 2011] ../../acisf04397/products/spectra/fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1_src.pi and ../../acisf04397/products/spectra/fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 26 15:02:22 2011] ../../acisf04397/products/lightcurves/fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1_src.lc and ../../acisf04397/products/lightcurves/fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 26 15:04:08 2011] Keeping rmf generated by specextract
[Wed Oct 26 15:04:08 2011] 187.565
[Wed Oct 26 15:13:02 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:13:02 2011] Error reading totcts from fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 26 15:13:03 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:13:03 2011] Using photon index=1.80, rate=0.00823, arf fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 15:13:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:13:03 2011] Updating source flux to 1.2e-13
[Wed Oct 26 15:13:20 2011] Reading fit data from acisf04397/analysis//spectral/fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct 26 15:13:20 2011] Spectral fit parameter nH value = 2.78637e+22
[Wed Oct 26 15:13:20 2011] Spectral fit parameter PhoIndex value = 2.45679
[Wed Oct 26 15:13:20 2011] Failed to get F(0.3-8.0) from acisf04397/analysis//spectral/fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct 26 15:13:20 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:13:20 2011] Using Nh = 2.8e+22, photon index=2.46, rate=0.00823, arf fullrun_ccd1_acisf04397_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 15:13:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:13:21 2011] Updating source flux to 1.4e-13