[Sun Oct 23 02:55:08 2011] Detection parameters:
  Position = (514.4, 1147.4) = 5 35 21.39 -5 26 43.9
  Extent = 0.6" x 0.5", rotation angle = 96 degrees
  Source counts = 2989.7 +/- 55.7
  Background counts = 107.3
  Rate = 0.03 +/- 0.0006

[Sun Oct 23 02:55:21 2011] Off-axis axis estimate = 3.26'
[Sun Oct 23 03:01:56 2011] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 03:01:56 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Sun Oct 23 03:01:56 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.702
[Sun Oct 23 03:01:56 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.64"
[Sun Oct 23 03:01:59 2011] fullrun_ccd0_acisf04395_pi14-548_cl_pass0_src10.ximg exists
[Sun Oct 23 03:01:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04395_pi14-548_cl_pass0_src10.csv
[Sun Oct 23 03:01:59 2011] fullrun_ccd0_acisf04395_pi14-548_cl_pass0_src10_1.ximg exists
[Sun Oct 23 03:01:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04395_pi14-548_cl_pass0_src10.csv
[Sun Oct 23 03:01:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04395_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04395_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 03:02:01 2011] fullrun_ccd0_acisf04395_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sun Oct 23 03:02:01 2011] fullrun_ccd0_acisf04395_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Oct 23 03:02:01 2011] Fit fullrun_ccd0_acisf04395_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Oct 23 03:03:09 2011] Spatial fit model total counts = 3139.850000, observed total counts = 3129.000000
[Sun Oct 23 03:03:09 2011] Offset between fit and detection position for source 10 = 0.684773 pixels
[Sun Oct 23 03:03:09 2011] 3147.021000 total counts/ 187.281000 bgd. counts: snr = 216.275190
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.684773 pixels
  Position = (514.9, 1147.9) = 5 35 21.39 -5 26 43.9
  Extent = 0.7 (0.7-0.7)", rotation angle = 0
  Source counts = 2959.7 +/- 56.1
  Background counts = 187.3
  Rate = 0.03 +/- 0.0006
[Sun Oct 23 03:03:10 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 03:03:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 03:03:10 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 03:03:10 2011] Source does appear to be extended
[Sun Oct 23 03:03:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 03:04:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 03:04:58 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Sun Oct 23 03:04:58 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.109
[Sun Oct 23 03:04:58 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.69"
[Sun Oct 23 03:05:00 2011] fullrun_ccd0_acisf04395_pi14-548_cl_pass1_src10.ximg exists
[Sun Oct 23 03:05:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04395_pi14-548_cl_pass1_src10.csv
[Sun Oct 23 03:05:00 2011] fullrun_ccd0_acisf04395_pi14-548_cl_pass1_src10_1.ximg exists
[Sun Oct 23 03:05:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04395_pi14-548_cl_pass1_src10.csv
[Sun Oct 23 03:05:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04395_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04395_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 03:05:02 2011] fullrun_ccd0_acisf04395_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sun Oct 23 03:05:02 2011] fullrun_ccd0_acisf04395_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Oct 23 03:05:02 2011] Fit fullrun_ccd0_acisf04395_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Oct 23 03:06:00 2011] Spatial fit model total counts = 3129.580000, observed total counts = 3131.000000
[Sun Oct 23 03:06:00 2011] Offset between fit and detection position for source 10 = 0.010312 pixels
[Sun Oct 23 03:06:00 2011] 3129.334000 total counts/ 171.434000 bgd. counts: snr = 225.909767
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.010312 pixels
  Position = (514.9, 1147.9) = 5 35 21.39 -5 26 43.9
  Extent = 0.7 (0.7-0.7)", rotation angle = 0
  Source counts = 2957.9 +/- 55.9
  Background counts = 171.4
  Rate = 0.03 +/- 0.0006
[Sun Oct 23 03:06:01 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 03:06:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 03:06:01 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 03:06:01 2011] Source does appear to be extended
[Sun Oct 23 03:06:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 03:07:44 2011] Not overwriting source region fullrun_ccd0_acisf04395_pi14-548_pass1_cl_src10_src.reg
[Sun Oct 23 03:07:44 2011] Extracting stamp from image fullrun_ccd0_acisf04395_pi14-548_cl_sm2.00.img.gz, (483, 1116) - (547, 1180)
[Sun Oct 23 03:07:44 2011] Writing fullrun_ccd0_acisf04395_pi14-548_pass1_cl_src10.gif
[Sun Oct 23 03:08:23 2011] ../../acisf04395/products/events/fullrun_ccd0_acisf04395_pi14-548_pass1_cl_src10_src.evt and ../../acisf04395/products/events/fullrun_ccd0_acisf04395_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun Oct 23 03:08:23 2011] Size of ../../acisf04395/products/events/fullrun_ccd0_acisf04395_pi14-548_pass1_cl_src10_src.evt.gz[events] = 3057 counts
[Sun Oct 23 03:08:23 2011] Mean chipx,y = (954.87, 703.78)
[Sun Oct 23 03:08:23 2011] Mean tdetx,y = (3764.78, 4177.13)
[Sun Oct 23 03:08:23 2011] chipx,y range = (936.00-977.00, 683.00-725.00)
[Sun Oct 23 03:08:23 2011] Size of ../../acisf04395/products/events/fullrun_ccd0_acisf04395_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 146 counts
[Sun Oct 23 03:08:23 2011] ../../acisf04395/products/images/fullrun_ccd0_acisf04395_pi14-548_pass1_cl_src10_src.img and ../../acisf04395/products/images/fullrun_ccd0_acisf04395_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun Oct 23 03:08:23 2011] ../../acisf04395/products/spectra/fullrun_ccd0_acisf04395_pi14-548_pass1_cl_src10_src.pi and ../../acisf04395/products/spectra/fullrun_ccd0_acisf04395_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sun Oct 23 03:08:26 2011] ../../acisf04395/products/lightcurves/fullrun_ccd0_acisf04395_pi14-548_pass1_cl_src10_src.lc and ../../acisf04395/products/lightcurves/fullrun_ccd0_acisf04395_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun Oct 23 03:16:12 2011] Keeping rmf generated by specextract
[Sun Oct 23 03:16:12 2011] 199.431
[Sun Oct 23 03:47:37 2011] Updating aperture counts using extracted products
[Sun Oct 23 03:47:37 2011] Error reading totcts from fullrun_ccd0_acisf04395_pi14-548_pass1_cl_src10_src.pi.gz
[Sun Oct 23 03:47:40 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 03:47:40 2011] Using photon index=1.80, rate=0.0296, arf fullrun_ccd0_acisf04395_pi14-548_pass1_cl_src10.arf
[Sun Oct 23 03:47:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 03:47:40 2011] Updating source flux to 3.3e-13