[Fri Oct 14 15:45:12 2011] Detection parameters:
  Position = (472.5, 617.7) = 15 3 43.80 -42 1 52.9
  Extent = 3.1" x 1.2", rotation angle = 133 degrees
  Source counts = 12.4 +/- 5.5
  Background counts = 17.6
  Rate = 0.0006 +/- 0.0003

[Fri Oct 14 15:45:15 2011] Off-axis axis estimate = 8.71'
[Fri Oct 14 15:46:23 2011] Using EEF radius (= 3.35 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 15:46:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 15:46:23 2011] Initial guess for spatial extent in simple fitting = 3.35"
[Fri Oct 14 15:46:23 2011] source mask rpix=6.8, npix_max = 214, mask sum = 225, frac = 1.051
[Fri Oct 14 15:46:23 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.35"
[Fri Oct 14 15:46:24 2011] fullrun_ccd0_acisf04394_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 14 15:46:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04394_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 15:46:24 2011] fullrun_ccd0_acisf04394_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 14 15:46:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04394_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 15:46:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04394_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04394_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 15:46:24 2011] fullrun_ccd0_acisf04394_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 14 15:46:24 2011] fullrun_ccd0_acisf04394_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 14 15:46:24 2011] Fit fullrun_ccd0_acisf04394_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 14 15:46:32 2011] Spatial fit model total counts = 184.255000, observed total counts = 183.000000
[Fri Oct 14 15:46:32 2011] Offset between fit and detection position for source 1 = 4.125536 pixels
[Fri Oct 14 15:46:32 2011] 185.040900 total counts/ 135.858000 bgd. counts: snr = 4.219602
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.125536 pixels
  Position = (476.3, 616.0) = 15 3 43.66 -42 1 54.0
  Extent = 5.1 (1.9-6.7)", rotation angle = 0
  Source counts = 49.2 +/- 13.6
  Background counts = 135.9
  Rate = 0.003 +/- 0.0007
[Fri Oct 14 15:46:32 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 15:46:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 15:46:32 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 15:46:32 2011] Source does appear to be extended
[Fri Oct 14 15:46:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 15:46:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 15:46:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 15:46:52 2011] Initial guess for spatial extent in simple fitting = 5.09"
[Fri Oct 14 15:46:52 2011] source mask rpix=10.3, npix_max = 470, mask sum = 473, frac = 1.006
[Fri Oct 14 15:46:52 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.09"
[Fri Oct 14 15:46:54 2011] fullrun_ccd0_acisf04394_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 14 15:46:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04394_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 15:46:54 2011] fullrun_ccd0_acisf04394_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 14 15:46:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04394_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 15:46:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04394_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04394_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 15:46:54 2011] fullrun_ccd0_acisf04394_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 14 15:46:54 2011] fullrun_ccd0_acisf04394_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 14 15:46:54 2011] Fit fullrun_ccd0_acisf04394_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 14 15:47:00 2011] Spatial fit model total counts = 337.124000, observed total counts = 339.000000
[Fri Oct 14 15:47:00 2011] Offset between fit and detection position for source 1 = 2.576333 pixels
[Fri Oct 14 15:47:00 2011] 338.494800 total counts/ 251.233000 bgd. counts: snr = 5.505361
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.576333 pixels
  Position = (474.4, 617.7) = 15 3 43.74 -42 1 53.2
  Extent = 7.0 (4.1-10.2)", rotation angle = 0
  Source counts = 87.3 +/- 18.4
  Background counts = 251.2
  Rate = 0.004 +/- 0.0009
[Fri Oct 14 15:47:00 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 15:47:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 15:47:00 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 15:47:00 2011] Source does appear to be extended
[Fri Oct 14 15:47:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 15:47:19 2011] Not overwriting source region fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 14 15:47:19 2011] Extracting stamp from image fullrun_ccd0_acisf04394_pi14-548_cl_sm2.00.img.gz, (156, 300) - (792, 936)
[Fri Oct 14 15:47:19 2011] Writing fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1.gif
[Fri Oct 14 15:47:19 2011] ../../acisf04394/products/events/fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1_src.evt and ../../acisf04394/products/events/fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 14 15:47:19 2011] Size of ../../acisf04394/products/events/fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1_src.evt.gz[events] = 476 counts
[Fri Oct 14 15:47:19 2011] Mean chipx,y = (274.05, 407.17)
[Fri Oct 14 15:47:19 2011] Mean tdetx,y = (3468.17, 4857.95)
[Fri Oct 14 15:47:19 2011] chipx,y range = (200.00-341.00, 340.00-474.00)
[Fri Oct 14 15:47:19 2011] Size of ../../acisf04394/products/events/fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 3390 counts
[Fri Oct 14 15:47:19 2011] ../../acisf04394/products/images/fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1_src.img and ../../acisf04394/products/images/fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 14 15:47:19 2011] Not generating rmf since there are only 87 counts
[Fri Oct 14 15:47:19 2011] arf not found, will run specextract
[Fri Oct 14 15:47:22 2011] ../../acisf04394/products/spectra/fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1_bkg.pi not found
[Fri Oct 14 15:47:22 2011] ../../acisf04394/products/spectra/fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1.warf not found
[Fri Oct 14 15:47:22 2011] ../../acisf04394/products/spectra/fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1.wrmf not found
[Fri Oct 14 15:47:22 2011] Removal of ../../acisf04394/products/spectra/fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1.soff failed
[Fri Oct 14 15:47:22 2011] Failed to rename ../../acisf04394/products/spectra/fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1_grp.pi to ../../acisf04394/products/spectra/fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1_src.pi
[Fri Oct 14 15:47:29 2011] ../../acisf04394/products/lightcurves/fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1_src.lc and ../../acisf04394/products/lightcurves/fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 14 15:47:37 2011] No arf file found
[Fri Oct 14 15:52:58 2011] Updating aperture counts using extracted products
[Fri Oct 14 15:52:58 2011] Error reading totcts from fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1_src.pi
[Fri Oct 14 15:52:58 2011] No arf file for this source, not re-computing flux
[Fri Oct 14 15:53:00 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 15:53:01 2011] acisf04394/analysis//spectral/fullrun_ccd0_acisf04394_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete