[Sun Oct  2 10:23:59 2011] Detection parameters:
  Position = (344.9, 893.5) = 15 3 8.72 -41 35 10.5
  Extent = 2.5" x 1.5", rotation angle = 179 degrees
  Source counts = 76.4 +/- 9.1
  Background counts = 6.6
  Rate = 0.004 +/- 0.0005

[Sun Oct  2 10:24:00 2011] Off-axis axis estimate = 8.08'
[Sun Oct  2 10:25:13 2011] Using EEF radius (= 2.88 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 10:25:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  2 10:25:13 2011] Initial guess for spatial extent in simple fitting = 2.88"
[Sun Oct  2 10:25:13 2011] source mask rpix=5.9, npix_max = 161, mask sum = 156, frac = 0.964
[Sun Oct  2 10:25:13 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.88"
[Sun Oct  2 10:25:14 2011] fullrun_ccd2_acisf04390_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct  2 10:25:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04390_pi14-548_cl_pass0_src1.csv
[Sun Oct  2 10:25:14 2011] fullrun_ccd2_acisf04390_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct  2 10:25:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04390_pi14-548_cl_pass0_src1.csv
[Sun Oct  2 10:25:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04390_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04390_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 10:25:14 2011] fullrun_ccd2_acisf04390_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct  2 10:25:14 2011] fullrun_ccd2_acisf04390_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct  2 10:25:14 2011] Fit fullrun_ccd2_acisf04390_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct  2 10:25:28 2011] Spatial fit model total counts = 91.997200, observed total counts = 92.000000
[Sun Oct  2 10:25:28 2011] Offset between fit and detection position for source 1 = 0.761170 pixels
[Sun Oct  2 10:25:28 2011] 92.062100 total counts/ 16.813800 bgd. counts: snr = 18.351170
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.761170 pixels
  Position = (345.5, 893.9) = 15 3 8.72 -41 35 10.5
  Extent = 2.5 (1.9-3.2)", rotation angle = 0
  Source counts = 75.2 +/- 9.6
  Background counts = 16.8
  Rate = 0.004 +/- 0.0005
[Sun Oct  2 10:25:28 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 10:25:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 10:25:28 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 10:25:28 2011] Source does appear to be extended
[Sun Oct  2 10:25:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 10:25:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 10:25:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  2 10:25:59 2011] Initial guess for spatial extent in simple fitting = 2.51"
[Sun Oct  2 10:25:59 2011] source mask rpix=5.1, npix_max = 125, mask sum = 132, frac = 1.054
[Sun Oct  2 10:25:59 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.51"
[Sun Oct  2 10:25:59 2011] fullrun_ccd2_acisf04390_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct  2 10:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04390_pi14-548_cl_pass1_src1.csv
[Sun Oct  2 10:25:59 2011] fullrun_ccd2_acisf04390_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct  2 10:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04390_pi14-548_cl_pass1_src1.csv
[Sun Oct  2 10:25:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04390_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04390_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 10:25:59 2011] fullrun_ccd2_acisf04390_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct  2 10:25:59 2011] fullrun_ccd2_acisf04390_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct  2 10:25:59 2011] Fit fullrun_ccd2_acisf04390_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct  2 10:26:11 2011] Spatial fit model total counts = 91.993900, observed total counts = 92.000000
[Sun Oct  2 10:26:11 2011] Offset between fit and detection position for source 1 = 0.207545 pixels
[Sun Oct  2 10:26:11 2011] 92.037700 total counts/ 24.175200 bgd. counts: snr = 13.802089
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.207545 pixels
  Position = (345.3, 894.0) = 15 3 8.73 -41 35 10.5
  Extent = 2.2 (1.7-2.8)", rotation angle = 0
  Source counts = 67.9 +/- 9.6
  Background counts = 24.2
  Rate = 0.003 +/- 0.0005
[Sun Oct  2 10:26:11 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 10:26:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 10:26:11 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 10:26:11 2011] Source does appear to be extended
[Sun Oct  2 10:26:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 10:30:25 2011] Not overwriting source region fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1_src.reg
[Sun Oct  2 10:30:25 2011] Extracting stamp from image fullrun_ccd2_acisf04390_pi14-548_cl_sm2.00.img.gz, (244, 792) - (447, 996)
[Sun Oct  2 10:30:25 2011] Writing fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1.gif
[Sun Oct  2 10:30:34 2011] ../../acisf04390/products/events/fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1_src.evt and ../../acisf04390/products/events/fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct  2 10:30:35 2011] Size of ../../acisf04390/products/events/fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1_src.evt.gz[events] = 86 counts
[Sun Oct  2 10:30:35 2011] Mean chipx,y = (397.79, 144.98)
[Sun Oct  2 10:30:35 2011] Mean tdetx,y = (3205.98, 3688.21)
[Sun Oct  2 10:30:35 2011] chipx,y range = (373.00-424.00, 116.00-170.00)
[Sun Oct  2 10:30:36 2011] Size of ../../acisf04390/products/events/fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 55 counts
[Sun Oct  2 10:30:38 2011] ../../acisf04390/products/images/fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1_src.img and ../../acisf04390/products/images/fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct  2 10:30:38 2011] Not generating rmf since there are only 67 counts
[Sun Oct  2 10:30:38 2011] arf not found, will run specextract
[Sun Oct  2 10:30:40 2011] ../../acisf04390/products/spectra/fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1_bkg.pi not found
[Sun Oct  2 10:30:40 2011] ../../acisf04390/products/spectra/fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1.warf not found
[Sun Oct  2 10:30:40 2011] ../../acisf04390/products/spectra/fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1.wrmf not found
[Sun Oct  2 10:30:40 2011] Removal of ../../acisf04390/products/spectra/fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1.soff failed
[Sun Oct  2 10:30:40 2011] Failed to rename ../../acisf04390/products/spectra/fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1_grp.pi to ../../acisf04390/products/spectra/fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1_src.pi
[Sun Oct  2 10:30:48 2011] ../../acisf04390/products/lightcurves/fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1_src.lc and ../../acisf04390/products/lightcurves/fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct  2 10:33:18 2011] No arf file found
[Sun Oct  2 10:35:24 2011] Updating aperture counts using extracted products
[Sun Oct  2 10:35:24 2011] Error reading totcts from fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1_src.pi
[Sun Oct  2 10:35:24 2011] No arf file for this source, not re-computing flux
[Sun Oct  2 10:35:31 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct  2 10:35:32 2011] acisf04390/analysis//spectral/fullrun_ccd2_acisf04390_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete