[Mon Oct  3 22:14:09 2011] Detection parameters:
  Position = (808.9, 529.3) = 15 2 5.99 -42 15 13.3
  Extent = 1.9" x 1.1", rotation angle = 61 degrees
  Source counts = 10.2 +/- 3.5
  Background counts = 1.8
  Rate = 0.0005 +/- 0.0002

[Mon Oct  3 22:14:10 2011] Off-axis axis estimate = 7.83'
[Mon Oct  3 22:15:56 2011] Using EEF radius (= 2.71 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 22:15:56 2011] Initial guess for spatial extent in simple fitting = 2.71"
[Mon Oct  3 22:15:56 2011] source mask rpix=5.5, npix_max = 144, mask sum = 133, frac = 0.919
[Mon Oct  3 22:15:56 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 2.71"
[Mon Oct  3 22:15:57 2011] fullrun_ccd1_acisf04387_pi14-548_cl_pass0_src13.ximg exists
[Mon Oct  3 22:15:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04387_pi14-548_cl_pass0_src13.csv
[Mon Oct  3 22:15:57 2011] fullrun_ccd1_acisf04387_pi14-548_cl_pass0_src13_1.ximg exists
[Mon Oct  3 22:15:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04387_pi14-548_cl_pass0_src13.csv
[Mon Oct  3 22:15:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04387_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04387_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 22:15:57 2011] fullrun_ccd1_acisf04387_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Mon Oct  3 22:15:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04387_pi14-548_cl_pass0_tfrozen_src13.csv
[Mon Oct  3 22:15:57 2011] fullrun_ccd1_acisf04387_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Oct  3 22:15:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf04387_pi14-548_cl_pass0_tfrozen_src13.csv
[Mon Oct  3 22:15:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf04387_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf04387_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 22:16:06 2011] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 31.033116 pixels away
[Mon Oct  3 22:16:06 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 22:16:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 22:16:06 2011] Assessing source extent using major
[Mon Oct  3 22:16:06 2011] Source does appear to be extended
[Mon Oct  3 22:16:06 2011] Computing asymmetry using major and minor axis, asym = 1.81
[Mon Oct  3 22:16:06 2011] Source is asymmetric
[Mon Oct  3 22:16:06 2011] Deleting source due to low Poisson probability 0.9