[Mon Oct  3 22:14:04 2011] Detection parameters:
  Position = (742.2, 1045.1) = 15 2 42.98 -42 4 58.1
  Extent = 1.3" x 0.8", rotation angle = 21 degrees
  Source counts = 34.9 +/- 7.2
  Background counts = 17.1
  Rate = 0.002 +/- 0.0004

[Mon Oct  3 22:14:06 2011] Off-axis axis estimate = 6.86'
[Mon Oct  3 22:15:54 2011] Using EEF radius (= 2.10 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 22:15:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 22:15:54 2011] Initial guess for spatial extent in simple fitting = 2.10"
[Mon Oct  3 22:15:54 2011] source mask rpix=4.3, npix_max = 90, mask sum = 100, frac = 1.101
[Mon Oct  3 22:15:54 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.10"
[Mon Oct  3 22:15:55 2011] fullrun_ccd0_acisf04387_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct  3 22:15:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04387_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 22:15:55 2011] fullrun_ccd0_acisf04387_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct  3 22:15:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04387_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 22:15:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04387_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04387_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 22:15:55 2011] fullrun_ccd0_acisf04387_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct  3 22:15:55 2011] fullrun_ccd0_acisf04387_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct  3 22:15:55 2011] Fit fullrun_ccd0_acisf04387_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct  3 22:16:04 2011] Spatial fit model total counts = 82.940300, observed total counts = 82.000000
[Mon Oct  3 22:16:04 2011] Offset between fit and detection position for source 1 = 0.407698 pixels
[Mon Oct  3 22:16:04 2011] 83.216900 total counts/ 51.427200 bgd. counts: snr = 4.432921
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.407698 pixels
  Position = (742.6, 1045.2) = 15 2 42.98 -42 4 58.3
  Extent = 1.6 (1.2-2.1)", rotation angle = 0
  Source counts = 31.8 +/- 9.1
  Background counts = 51.4
  Rate = 0.002 +/- 0.0005
[Mon Oct  3 22:16:04 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 22:16:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 22:16:04 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 22:16:04 2011] Source does appear to be extended
[Mon Oct  3 22:16:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 22:16:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 22:16:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 22:16:26 2011] Initial guess for spatial extent in simple fitting = 1.62"
[Mon Oct  3 22:16:26 2011] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.973
[Mon Oct  3 22:16:26 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.62"
[Mon Oct  3 22:16:27 2011] fullrun_ccd0_acisf04387_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct  3 22:16:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04387_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 22:16:27 2011] fullrun_ccd0_acisf04387_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct  3 22:16:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf04387_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 22:16:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf04387_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf04387_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 22:16:27 2011] fullrun_ccd0_acisf04387_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct  3 22:16:27 2011] fullrun_ccd0_acisf04387_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct  3 22:16:27 2011] Fit fullrun_ccd0_acisf04387_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct  3 22:16:34 2011] Spatial fit model total counts = 65.244200, observed total counts = 65.000000
[Mon Oct  3 22:16:34 2011] Offset between fit and detection position for source 1 = 0.407236 pixels
[Mon Oct  3 22:16:34 2011] 65.949300 total counts/ 37.390800 bgd. counts: snr = 4.670389
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.407236 pixels
  Position = (742.3, 1045.0) = 15 2 43.00 -42 4 58.4
  Extent = 1.5 (1.0-2.0)", rotation angle = 0
  Source counts = 28.6 +/- 8.1
  Background counts = 37.4
  Rate = 0.001 +/- 0.0004
[Mon Oct  3 22:16:34 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 22:16:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 22:16:34 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 22:16:34 2011] Source does appear to be extended
[Mon Oct  3 22:16:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 22:16:57 2011] Not overwriting source region fullrun_ccd0_acisf04387_pi14-548_pass1_cl_src1_src.reg
[Mon Oct  3 22:16:57 2011] Extracting stamp from image fullrun_ccd0_acisf04387_pi14-548_cl_sm2.00.img.gz, (675, 978) - (810, 1112)
[Mon Oct  3 22:16:57 2011] Writing fullrun_ccd0_acisf04387_pi14-548_pass1_cl_src1.gif
[Mon Oct  3 22:16:59 2011] ../../acisf04387/products/events/fullrun_ccd0_acisf04387_pi14-548_pass1_cl_src1_src.evt and ../../acisf04387/products/events/fullrun_ccd0_acisf04387_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct  3 22:16:59 2011] Size of ../../acisf04387/products/events/fullrun_ccd0_acisf04387_pi14-548_pass1_cl_src1_src.evt.gz[events] = 47 counts
[Mon Oct  3 22:16:59 2011] Mean chipx,y = (783.66, 293.09)
[Mon Oct  3 22:16:59 2011] Mean tdetx,y = (3354.09, 4348.34)
[Mon Oct  3 22:16:59 2011] chipx,y range = (763.00-808.00, 274.00-318.00)
[Mon Oct  3 22:16:59 2011] Size of ../../acisf04387/products/events/fullrun_ccd0_acisf04387_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 243 counts
[Mon Oct  3 22:16:59 2011] ../../acisf04387/products/images/fullrun_ccd0_acisf04387_pi14-548_pass1_cl_src1_src.img and ../../acisf04387/products/images/fullrun_ccd0_acisf04387_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct  3 22:16:59 2011] ../../acisf04387/products/spectra/fullrun_ccd0_acisf04387_pi14-548_pass1_cl_src1_src.pi and ../../acisf04387/products/spectra/fullrun_ccd0_acisf04387_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct  3 22:16:59 2011] Not generating rmf since there are only 28 counts
[Mon Oct  3 22:17:03 2011] ../../acisf04387/products/lightcurves/fullrun_ccd0_acisf04387_pi14-548_pass1_cl_src1_src.lc and ../../acisf04387/products/lightcurves/fullrun_ccd0_acisf04387_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct  3 22:17:33 2011] 181.692
[Mon Oct  3 22:19:31 2011] Updating aperture counts using extracted products
[Mon Oct  3 22:19:31 2011] Error reading totcts from fullrun_ccd0_acisf04387_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct  3 22:19:31 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 22:19:31 2011] Using photon index=1.80, rate=0.00144, arf fullrun_ccd0_acisf04387_pi14-548_pass1_cl_src1.arf
[Mon Oct  3 22:19:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 22:19:31 2011] Updating source flux to 1.7e-14
[Mon Oct  3 22:19:34 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct  3 22:19:35 2011] acisf04387/analysis//spectral/fullrun_ccd0_acisf04387_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete