[Fri Sep 23 00:35:21 2011] Detection parameters:
  Position = (743.8, 1222.2) = 9 54 37.36 -20 20 5.3
  Extent = 0.8" x 0.5", rotation angle = 125 degrees
  Source counts = 23.4 +/- 4.9
  Background counts = 0.6
  Rate = 0.002 +/- 0.0003

[Fri Sep 23 00:35:25 2011] Off-axis axis estimate = 2.96'
[Fri Sep 23 00:36:17 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 00:36:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 00:36:17 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Fri Sep 23 00:36:17 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.814
[Fri Sep 23 00:36:17 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.57"
[Fri Sep 23 00:36:19 2011] fullrun_ccd7_acisf04378_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 23 00:36:21 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf04378_pi14-548_cl_pass0_src3.csv
[Fri Sep 23 00:36:21 2011] fullrun_ccd7_acisf04378_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 23 00:36:21 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf04378_pi14-548_cl_pass0_src3.csv
[Fri Sep 23 00:36:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04378_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04378_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 00:36:26 2011] fullrun_ccd7_acisf04378_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 23 00:36:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04378_pi14-548_cl_pass0_tfrozen_src3.csv
[Fri Sep 23 00:36:26 2011] fullrun_ccd7_acisf04378_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 23 00:36:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04378_pi14-548_cl_pass0_tfrozen_src3.csv
[Fri Sep 23 00:36:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04378_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04378_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 00:36:32 2011] Spatial fit model total counts = 22.376100, observed total counts = 25.000000
[Fri Sep 23 00:36:32 2011] Offset between fit and detection position for source 2 = 0.732256 pixels
[Fri Sep 23 00:36:32 2011] 22.057806 total counts/ 0.113306 bgd. counts: snr = 65.192740
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.732256 pixels
  Position = (744.1, 1222.8) = 9 54 37.36 -20 20 5.3
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 21.9 +/- 4.7
  Background counts = 0.1
  Rate = 0.001 +/- 0.0003
[Fri Sep 23 00:36:32 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 00:36:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 00:36:32 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 00:36:32 2011] Source does appear to be extended
[Fri Sep 23 00:36:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 00:36:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 00:36:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 00:36:48 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Fri Sep 23 00:36:48 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.912
[Fri Sep 23 00:36:48 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.78"
[Fri Sep 23 00:36:48 2011] fullrun_ccd7_acisf04378_pi14-548_cl_pass1_src2.ximg exists
[Fri Sep 23 00:36:48 2011] fullrun_ccd7_acisf04378_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Sep 23 00:36:48 2011] Fit fullrun_ccd7_acisf04378_pi14-548_cl_pass1_src2 appears to have run properly
[Fri Sep 23 00:36:48 2011] fullrun_ccd7_acisf04378_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep 23 00:36:48 2011] fullrun_ccd7_acisf04378_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep 23 00:36:48 2011] Fit fullrun_ccd7_acisf04378_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Sep 23 00:36:52 2011] Spatial fit model total counts = 23.635100, observed total counts = 25.000000
[Fri Sep 23 00:36:52 2011] Offset between fit and detection position for source 2 = 0.084383 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.084383 pixels
  Position = (744.1, 1222.9) = 9 54 37.37 -20 20 5.2
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 23.3 +/- 4.8
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Fri Sep 23 00:36:52 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 00:36:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 00:36:52 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 00:36:52 2011] Source does appear to be extended
[Fri Sep 23 00:36:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 00:38:39 2011] Not overwriting source region fullrun_ccd7_acisf04378_pi14-548_pass1_cl_src2_src.reg
[Fri Sep 23 00:38:39 2011] Extracting stamp from image fullrun_ccd7_acisf04378_pi14-548_cl_sm2.00.img.gz, (708, 1187) - (780, 1259)
[Fri Sep 23 00:38:39 2011] Writing fullrun_ccd7_acisf04378_pi14-548_pass1_cl_src2.gif
[Fri Sep 23 00:38:46 2011] ../../acisf04378/products/events/fullrun_ccd7_acisf04378_pi14-548_pass1_cl_src2_src.evt and ../../acisf04378/products/events/fullrun_ccd7_acisf04378_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Sep 23 00:38:47 2011] Size of ../../acisf04378/products/events/fullrun_ccd7_acisf04378_pi14-548_pass1_cl_src2_src.evt.gz[events] = 24 counts
[Fri Sep 23 00:38:47 2011] Mean chipx,y = (137.71, 161.42)
[Fri Sep 23 00:38:47 2011] Mean tdetx,y = (4054.71, 1863.42)
[Fri Sep 23 00:38:47 2011] chipx,y range = (122.00-159.00, 142.00-176.00)
[Fri Sep 23 00:38:47 2011] Size of ../../acisf04378/products/events/fullrun_ccd7_acisf04378_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 12 counts
[Fri Sep 23 00:38:47 2011] ../../acisf04378/products/images/fullrun_ccd7_acisf04378_pi14-548_pass1_cl_src2_src.img and ../../acisf04378/products/images/fullrun_ccd7_acisf04378_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Sep 23 00:38:47 2011] ../../acisf04378/products/spectra/fullrun_ccd7_acisf04378_pi14-548_pass1_cl_src2_src.pi and ../../acisf04378/products/spectra/fullrun_ccd7_acisf04378_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Sep 23 00:38:47 2011] Not generating rmf since there are only 23 counts
[Fri Sep 23 00:38:50 2011] ../../acisf04378/products/lightcurves/fullrun_ccd7_acisf04378_pi14-548_pass1_cl_src2_src.lc and ../../acisf04378/products/lightcurves/fullrun_ccd7_acisf04378_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Sep 23 00:39:14 2011] 232.69
[Fri Sep 23 00:39:16 2011] Updating aperture counts using extracted products
[Fri Sep 23 00:39:16 2011] Error reading totcts from fullrun_ccd7_acisf04378_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Sep 23 00:39:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 00:39:16 2011] Using photon index=1.80, rate=0.00156, arf fullrun_ccd7_acisf04378_pi14-548_pass1_cl_src2.arf
[Fri Sep 23 00:39:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 00:39:16 2011] Updating source flux to 1.1e-14
[Fri Sep 23 00:39:31 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting