[Sun Feb 19 14:06:16 2012] Detection parameters:
  Position = (693.2, 1011.3) = 0 42 43.32 41 13 19.6
  Extent = 0.5" x 0.5", rotation angle = 129 degrees
  Source counts = 25.8 +/- 5.1
  Background counts = 0.2
  Rate = 0.005 +/- 0.001

[Sun Feb 19 14:06:17 2012] Off-axis axis estimate = 3.10'
[Sun Feb 19 15:06:42 2012] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 15:06:42 2012] Initial guess for spatial extent in simple fitting = 0.60"
[Sun Feb 19 15:06:42 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.014
[Sun Feb 19 15:06:42 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 0.60"
[Sun Feb 19 15:45:42 2012] fullrun_ccd3_acisf04360_pi14-548_cl_pass0_src21.ximg exists
[Sun Feb 19 15:45:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04360_pi14-548_cl_pass0_src21.csv
[Sun Feb 19 15:45:42 2012] fullrun_ccd3_acisf04360_pi14-548_cl_pass0_src21_1.ximg exists
[Sun Feb 19 15:45:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04360_pi14-548_cl_pass0_src21.csv
[Sun Feb 19 15:45:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04360_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04360_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 15:45:42 2012] fullrun_ccd3_acisf04360_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Sun Feb 19 15:45:42 2012] fullrun_ccd3_acisf04360_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Feb 19 15:45:42 2012] Fit fullrun_ccd3_acisf04360_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Feb 19 15:45:56 2012] Spatial fit model total counts = 25.833700, observed total counts = 27.000000
[Sun Feb 19 15:45:56 2012] Offset between fit and detection position for source 11 = 0.712865 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.712865 pixels
  Position = (693.7, 1011.8) = 0 42 43.32 41 13 19.5
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 25.4 +/- 5.0
  Background counts = 0.0
  Rate = 0.005 +/- 0.001
[Sun Feb 19 15:45:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 15:45:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 15:45:56 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 15:45:56 2012] Source does appear to be extended
[Sun Feb 19 15:45:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 16:48:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 16:48:51 2012] Initial guess for spatial extent in simple fitting = 0.65"
[Sun Feb 19 16:48:51 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.219
[Sun Feb 19 16:48:51 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 0.65"
[Sun Feb 19 17:34:02 2012] fullrun_ccd3_acisf04360_pi14-548_cl_pass1_src21.ximg exists
[Sun Feb 19 17:34:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04360_pi14-548_cl_pass1_src21.csv
[Sun Feb 19 17:34:02 2012] fullrun_ccd3_acisf04360_pi14-548_cl_pass1_src21_1.ximg exists
[Sun Feb 19 17:34:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04360_pi14-548_cl_pass1_src21.csv
[Sun Feb 19 17:34:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04360_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04360_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 17:34:02 2012] fullrun_ccd3_acisf04360_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Sun Feb 19 17:34:02 2012] fullrun_ccd3_acisf04360_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Feb 19 17:34:02 2012] Fit fullrun_ccd3_acisf04360_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Feb 19 17:34:15 2012] Spatial fit model total counts = 25.348200, observed total counts = 27.000000
[Sun Feb 19 17:34:15 2012] Offset between fit and detection position for source 11 = 0.007857 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.007857 pixels
  Position = (693.7, 1011.8) = 0 42 43.32 41 13 19.5
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 25.0 +/- 5.0
  Background counts = 0.0
  Rate = 0.005 +/- 0.001
[Sun Feb 19 17:34:15 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 17:34:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 17:34:15 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 17:34:15 2012] Source does appear to be extended
[Sun Feb 19 17:34:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 17:43:54 2012] Writing source region out to fullrun_ccd3_acisf04360_pi14-548_pass1_cl_src11_src.reg
[Sun Feb 19 17:43:54 2012] Extracting stamp from image fullrun_ccd3_acisf04360_pi14-548_cl_sm2.00.img.gz, (664, 982) - (723, 1042)
[Sun Feb 19 17:43:54 2012] Writing fullrun_ccd3_acisf04360_pi14-548_pass1_cl_src11.gif
[Sun Feb 19 17:47:22 2012] Size of ../../acisf04360/products/events/fullrun_ccd3_acisf04360_pi14-548_pass1_cl_src11_src.evt.gz[events] = 26 counts
[Sun Feb 19 17:47:22 2012] Mean chipx,y = (710.04, 719.58)
[Sun Feb 19 17:47:22 2012] Mean tdetx,y = (4412.42, 3771.04)
[Sun Feb 19 17:47:22 2012] chipx,y range = (694.00-729.00, 702.00-734.00)
[Sun Feb 19 17:47:22 2012] Size of ../../acisf04360/products/events/fullrun_ccd3_acisf04360_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 4 counts
[Sun Feb 19 17:47:23 2012] Not generating rmf since there are only 24 counts
[Sun Feb 19 17:47:23 2012] arf not found, will run specextract
[Sun Feb 19 17:47:25 2012] ../../acisf04360/products/spectra/fullrun_ccd3_acisf04360_pi14-548_pass1_cl_src11_bkg.pi not found
[Sun Feb 19 17:47:25 2012] ../../acisf04360/products/spectra/fullrun_ccd3_acisf04360_pi14-548_pass1_cl_src11.warf not found
[Sun Feb 19 17:47:25 2012] ../../acisf04360/products/spectra/fullrun_ccd3_acisf04360_pi14-548_pass1_cl_src11.wrmf not found
[Sun Feb 19 17:47:25 2012] Removal of ../../acisf04360/products/spectra/fullrun_ccd3_acisf04360_pi14-548_pass1_cl_src11.soff failed
[Sun Feb 19 17:47:25 2012] Failed to rename ../../acisf04360/products/spectra/fullrun_ccd3_acisf04360_pi14-548_pass1_cl_src11_grp.pi to ../../acisf04360/products/spectra/fullrun_ccd3_acisf04360_pi14-548_pass1_cl_src11_src.pi
[Sun Feb 19 17:50:20 2012] No arf file found
[Sun Feb 19 17:50:24 2012] Updating aperture counts using extracted products
[Sun Feb 19 17:50:24 2012] Error reading totcts from fullrun_ccd3_acisf04360_pi14-548_pass1_cl_src11_src.pi
[Sun Feb 19 17:50:25 2012] No arf file for this source, not re-computing flux
[Sun Feb 19 17:50:31 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 19 17:50:32 2012] acisf04360/analysis//spectral/fullrun_ccd3_acisf04360_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete