[Tue Mar 13 11:58:01 2012] Detection parameters:
  Position = (567.5, 728.2) = 23 18 22.30 -42 21 9.4
  Extent = 0.8" x 0.5", rotation angle = 130 degrees
  Source counts = 11.0 +/- 3.9
  Background counts = 4.0
  Rate = 0.0008 +/- 0.0003

[Tue Mar 13 11:58:02 2012] Off-axis axis estimate = 1.66'
[Tue Mar 13 11:58:44 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:58:44 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Tue Mar 13 11:58:44 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.297
[Tue Mar 13 11:58:44 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 0.40"
[Tue Mar 13 11:58:45 2012] fullrun_ccd7_acisf00436_pi14-548_cl_pass0_src12.ximg exists
[Tue Mar 13 11:58:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00436_pi14-548_cl_pass0_src12.csv
[Tue Mar 13 11:58:45 2012] fullrun_ccd7_acisf00436_pi14-548_cl_pass0_src12_1.ximg exists
[Tue Mar 13 11:58:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00436_pi14-548_cl_pass0_src12.csv
[Tue Mar 13 11:58:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00436_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00436_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:58:45 2012] fullrun_ccd7_acisf00436_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Tue Mar 13 11:58:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00436_pi14-548_cl_pass0_tfrozen_src12.csv
[Tue Mar 13 11:58:45 2012] fullrun_ccd7_acisf00436_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Mar 13 11:58:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00436_pi14-548_cl_pass0_tfrozen_src12.csv
[Tue Mar 13 11:58:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00436_pi14-548_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00436_pi14-548_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:58:49 2012] Source 17 is offset by 0.851063 and -1.413967 pixels which is larger than
2 X fitted extent = 0.732821 x 0.732821, not incorporating fit results
[Tue Mar 13 11:58:49 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:58:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:58:49 2012] Assessing source extent using major
[Tue Mar 13 11:58:49 2012] Source does appear to be extended
[Tue Mar 13 11:58:49 2012] Computing asymmetry using major and minor axis, asym = 1.60
[Tue Mar 13 11:58:49 2012] Source is asymmetric
[Tue Mar 13 11:58:49 2012] Deleting source due to low Poisson probability 0.9