[Tue Mar 13 11:58:01 2012] Detection parameters:
  Position = (491.6, 641.4) = 23 18 25.67 -42 21 52.2
  Extent = 0.5" x 0.5", rotation angle = 161 degrees
  Source counts = 27.2 +/- 5.7
  Background counts = 4.8
  Rate = 0.002 +/- 0.0004

[Tue Mar 13 11:58:02 2012] Off-axis axis estimate = 0.86'
[Tue Mar 13 11:58:44 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:58:44 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Mar 13 11:58:44 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.385
[Tue Mar 13 11:58:44 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 0.38"
[Tue Mar 13 11:58:45 2012] fullrun_ccd7_acisf00436_pi14-548_cl_pass0_src6.ximg exists
[Tue Mar 13 11:58:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00436_pi14-548_cl_pass0_src6.csv
[Tue Mar 13 11:58:45 2012] fullrun_ccd7_acisf00436_pi14-548_cl_pass0_src6_1.ximg exists
[Tue Mar 13 11:58:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00436_pi14-548_cl_pass0_src6.csv
[Tue Mar 13 11:58:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00436_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00436_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:58:45 2012] fullrun_ccd7_acisf00436_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Tue Mar 13 11:58:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00436_pi14-548_cl_pass0_tfrozen_src6.csv
[Tue Mar 13 11:58:45 2012] fullrun_ccd7_acisf00436_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Mar 13 11:58:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00436_pi14-548_cl_pass0_tfrozen_src6.csv
[Tue Mar 13 11:58:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00436_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00436_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:58:49 2012] Spatial fit model total counts = 3.678710, observed total counts = 5.000000
[Tue Mar 13 11:58:49 2012] Offset between fit and detection position for source 12 = 0.111260 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.111260 pixels
  Position = (491.6, 641.5) = 23 18 25.69 -42 21 52.4
  Extent = 0.2 (0.1-0.3)", rotation angle = 0
  Source counts = 3.8 +/- 1.9
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0004
[Tue Mar 13 11:58:49 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:58:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:58:49 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:58:49 2012] Source does appear to be extended
[Tue Mar 13 11:58:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:58:49 2012] Deleting source due to low Poisson probability 0.7