[Mon Oct 17 16:39:59 2011] Detection parameters:
  Position = (1035.8, 698.2) = 5 39 25.82 -28 44 55.0
  Extent = 3.2" x 1.9", rotation angle = 61 degrees
  Source counts = 95.5 +/- 10.3
  Background counts = 10.5
  Rate = 0.003 +/- 0.0003

[Mon Oct 17 16:40:00 2011] Off-axis axis estimate = 8.45'
[Mon Oct 17 16:40:59 2011] Using EEF radius (= 3.16 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 16:40:59 2011] Initial guess for spatial extent in simple fitting = 3.16"
[Mon Oct 17 16:40:59 2011] source mask rpix=6.4, npix_max = 191, mask sum = 196, frac = 1.024
[Mon Oct 17 16:40:59 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.16"
[Mon Oct 17 16:41:00 2011] fullrun_ccd2_acisf04274_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 17 16:41:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04274_pi14-548_cl_pass0_src3.csv
[Mon Oct 17 16:41:00 2011] fullrun_ccd2_acisf04274_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 17 16:41:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04274_pi14-548_cl_pass0_src3.csv
[Mon Oct 17 16:41:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04274_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04274_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 16:41:00 2011] fullrun_ccd2_acisf04274_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 17 16:41:00 2011] fullrun_ccd2_acisf04274_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 17 16:41:00 2011] Fit fullrun_ccd2_acisf04274_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct 17 16:41:11 2011] Spatial fit model total counts = 101.779000, observed total counts = 103.000000
[Mon Oct 17 16:41:11 2011] Offset between fit and detection position for source 2 = 0.792247 pixels
[Mon Oct 17 16:41:11 2011] 101.993320 total counts/ 7.052720 bgd. counts: snr = 35.749803
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.792247 pixels
  Position = (1036.0, 699.0) = 5 39 25.83 -28 44 54.9
  Extent = 2.9 (2.4-3.5)", rotation angle = 0
  Source counts = 94.9 +/- 10.1
  Background counts = 7.1
  Rate = 0.003 +/- 0.0003
[Mon Oct 17 16:41:11 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 16:41:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 16:41:11 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 16:41:11 2011] Source does appear to be extended
[Mon Oct 17 16:41:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 16:41:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 16:41:34 2011] Initial guess for spatial extent in simple fitting = 2.88"
[Mon Oct 17 16:41:34 2011] source mask rpix=5.9, npix_max = 161, mask sum = 144, frac = 0.890
[Mon Oct 17 16:41:34 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.88"
[Mon Oct 17 16:41:35 2011] fullrun_ccd2_acisf04274_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 17 16:41:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04274_pi14-548_cl_pass1_src3.csv
[Mon Oct 17 16:41:35 2011] fullrun_ccd2_acisf04274_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 17 16:41:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04274_pi14-548_cl_pass1_src3.csv
[Mon Oct 17 16:41:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04274_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04274_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 16:41:35 2011] fullrun_ccd2_acisf04274_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 17 16:41:35 2011] fullrun_ccd2_acisf04274_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 17 16:41:35 2011] Fit fullrun_ccd2_acisf04274_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct 17 16:41:45 2011] Spatial fit model total counts = 100.722000, observed total counts = 102.000000
[Mon Oct 17 16:41:45 2011] Offset between fit and detection position for source 2 = 0.293122 pixels
[Mon Oct 17 16:41:45 2011] 101.159900 total counts/ 15.408100 bgd. counts: snr = 21.845838
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.293122 pixels
  Position = (1035.8, 698.8) = 5 39 25.84 -28 44 55.0
  Extent = 2.7 (1.7-3.5)", rotation angle = 0
  Source counts = 85.8 +/- 10.1
  Background counts = 15.4
  Rate = 0.003 +/- 0.0003
[Mon Oct 17 16:41:45 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 16:41:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 16:41:45 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 16:41:45 2011] Source does appear to be extended
[Mon Oct 17 16:41:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 16:43:10 2011] Not overwriting source region fullrun_ccd2_acisf04274_pi14-548_pass1_cl_src2_src.reg
[Mon Oct 17 16:43:10 2011] Extracting stamp from image fullrun_ccd2_acisf04274_pi14-548_cl_sm2.00.img.gz, (913, 577) - (1158, 821)
[Mon Oct 17 16:43:10 2011] Writing fullrun_ccd2_acisf04274_pi14-548_pass1_cl_src2.gif
[Mon Oct 17 16:43:17 2011] ../../acisf04274/products/events/fullrun_ccd2_acisf04274_pi14-548_pass1_cl_src2_src.evt and ../../acisf04274/products/events/fullrun_ccd2_acisf04274_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct 17 16:43:17 2011] Size of ../../acisf04274/products/events/fullrun_ccd2_acisf04274_pi14-548_pass1_cl_src2_src.evt.gz[events] = 102 counts
[Mon Oct 17 16:43:17 2011] Mean chipx,y = (724.42, 266.85)
[Mon Oct 17 16:43:17 2011] Mean tdetx,y = (3327.85, 3361.58)
[Mon Oct 17 16:43:17 2011] chipx,y range = (694.00-753.00, 235.00-295.00)
[Mon Oct 17 16:43:17 2011] Size of ../../acisf04274/products/events/fullrun_ccd2_acisf04274_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 81 counts
[Mon Oct 17 16:43:17 2011] ../../acisf04274/products/images/fullrun_ccd2_acisf04274_pi14-548_pass1_cl_src2_src.img and ../../acisf04274/products/images/fullrun_ccd2_acisf04274_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct 17 16:43:17 2011] ../../acisf04274/products/spectra/fullrun_ccd2_acisf04274_pi14-548_pass1_cl_src2_src.pi and ../../acisf04274/products/spectra/fullrun_ccd2_acisf04274_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Oct 17 16:43:17 2011] Not generating rmf since there are only 85 counts
[Mon Oct 17 16:43:20 2011] ../../acisf04274/products/lightcurves/fullrun_ccd2_acisf04274_pi14-548_pass1_cl_src2_src.lc and ../../acisf04274/products/lightcurves/fullrun_ccd2_acisf04274_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct 17 16:44:07 2011] 169.368
[Mon Oct 17 16:45:49 2011] Updating aperture counts using extracted products
[Mon Oct 17 16:45:49 2011] Error reading totcts from fullrun_ccd2_acisf04274_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Oct 17 16:45:49 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 16:45:49 2011] Using photon index=1.80, rate=0.00288, arf fullrun_ccd2_acisf04274_pi14-548_pass1_cl_src2.arf
[Mon Oct 17 16:45:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 16:45:49 2011] Updating source flux to 3.8e-14
[Mon Oct 17 16:45:59 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting