[Thu Jun 30 20:22:31 2011] Detection parameters:
  Position = (860.2, 984.3) = 4 43 4.99 2 11 48.4
  Extent = 0.5" x 0.5", rotation angle = 180 degrees
  Source counts = 68.6 +/- 8.7
  Background counts = 7.4
  Rate = 0.001 +/- 0.0001

[Thu Jun 30 20:22:32 2011] Off-axis axis estimate = 0.91'
[Thu Jun 30 20:23:29 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Jun 30 20:23:29 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Jun 30 20:23:29 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.925
[Thu Jun 30 20:23:29 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.38"
[Thu Jun 30 20:23:30 2011] fullrun_ccd7_acisf04196_pi14-548_cl_pass0_src13.ximg exists
[Thu Jun 30 20:23:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04196_pi14-548_cl_pass0_src13.csv
[Thu Jun 30 20:23:30 2011] fullrun_ccd7_acisf04196_pi14-548_cl_pass0_src13_1.ximg exists
[Thu Jun 30 20:23:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04196_pi14-548_cl_pass0_src13.csv
[Thu Jun 30 20:23:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04196_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04196_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 30 20:23:32 2011] fullrun_ccd7_acisf04196_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Thu Jun 30 20:23:32 2011] fullrun_ccd7_acisf04196_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Jun 30 20:23:32 2011] Fit fullrun_ccd7_acisf04196_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Jun 30 20:23:46 2011] Spatial fit model total counts = 83.843700, observed total counts = 84.000000
[Thu Jun 30 20:23:46 2011] Offset between fit and detection position for source 14 = 0.838586 pixels
[Thu Jun 30 20:23:46 2011] 85.752700 total counts/ 26.113800 bgd. counts: snr = 11.670638
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.838586 pixels
  Position = (860.9, 984.8) = 4 43 4.98 2 11 48.4
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 59.6 +/- 9.3
  Background counts = 26.1
  Rate = 0.001 +/- 0.0002
[Thu Jun 30 20:23:46 2011] Vigneting correction estimate = 1.000000
[Thu Jun 30 20:23:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 30 20:23:46 2011] Assessing source extent using major axis lower bound
[Thu Jun 30 20:23:46 2011] Source does appear to be extended
[Thu Jun 30 20:23:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 30 20:24:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 30 20:24:06 2011] Initial guess for spatial extent in simple fitting = 0.36"
[Thu Jun 30 20:24:06 2011] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.668
[Thu Jun 30 20:24:06 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.36"
[Thu Jun 30 20:24:07 2011] fullrun_ccd7_acisf04196_pi14-548_cl_pass1_src13.ximg exists
[Thu Jun 30 20:24:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04196_pi14-548_cl_pass1_src13.csv
[Thu Jun 30 20:24:07 2011] fullrun_ccd7_acisf04196_pi14-548_cl_pass1_src13_1.ximg exists
[Thu Jun 30 20:24:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf04196_pi14-548_cl_pass1_src13.csv
[Thu Jun 30 20:24:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf04196_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf04196_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 30 20:24:09 2011] fullrun_ccd7_acisf04196_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Thu Jun 30 20:24:09 2011] fullrun_ccd7_acisf04196_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Jun 30 20:24:09 2011] Fit fullrun_ccd7_acisf04196_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Jun 30 20:24:19 2011] Spatial fit model total counts = 83.884700, observed total counts = 84.000000
[Thu Jun 30 20:24:19 2011] Offset between fit and detection position for source 14 = 0.005050 pixels
[Thu Jun 30 20:24:19 2011] 85.476000 total counts/ 25.611500 bgd. counts: snr = 11.829104
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.005050 pixels
  Position = (860.9, 984.8) = 4 43 4.98 2 11 48.4
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 59.9 +/- 9.2
  Background counts = 25.6
  Rate = 0.001 +/- 0.0002
[Thu Jun 30 20:24:19 2011] Vigneting correction estimate = 1.000000
[Thu Jun 30 20:24:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 30 20:24:19 2011] Assessing source extent using major axis lower bound
[Thu Jun 30 20:24:19 2011] Source does appear to be extended
[Thu Jun 30 20:24:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 30 20:27:15 2011] Not overwriting source region fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14_src.reg
[Thu Jun 30 20:27:15 2011] Extracting stamp from image fullrun_ccd7_acisf04196_pi14-548_cl_sm2.00.img.gz, (845, 968) - (877, 1001)
[Thu Jun 30 20:27:15 2011] Writing fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14.gif
[Thu Jun 30 20:28:40 2011] ../../acisf04196/products/events/fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14_src.evt and ../../acisf04196/products/events/fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Thu Jun 30 20:28:40 2011] Size of ../../acisf04196/products/events/fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14_src.evt.gz[events] = 64 counts
[Thu Jun 30 20:28:40 2011] Mean chipx,y = (137.95, 421.69)
[Thu Jun 30 20:28:40 2011] Mean tdetx,y = (4054.95, 2123.69)
[Thu Jun 30 20:28:40 2011] chipx,y range = (121.00-156.00, 405.00-440.00)
[Thu Jun 30 20:28:40 2011] Size of ../../acisf04196/products/events/fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 22 counts
[Thu Jun 30 20:28:40 2011] ../../acisf04196/products/images/fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14_src.img and ../../acisf04196/products/images/fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Thu Jun 30 20:28:40 2011] Not generating rmf since there are only 59 counts
[Thu Jun 30 20:28:40 2011] arf not found, will run specextract
[Thu Jun 30 20:28:42 2011] ../../acisf04196/products/spectra/fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14_bkg.pi not found
[Thu Jun 30 20:28:42 2011] ../../acisf04196/products/spectra/fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14.warf not found
[Thu Jun 30 20:28:42 2011] ../../acisf04196/products/spectra/fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14.wrmf not found
[Thu Jun 30 20:28:42 2011] Removal of ../../acisf04196/products/spectra/fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14.soff failed
[Thu Jun 30 20:28:42 2011] Failed to rename ../../acisf04196/products/spectra/fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14_grp.pi to ../../acisf04196/products/spectra/fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14_src.pi
[Thu Jun 30 20:28:47 2011] ../../acisf04196/products/lightcurves/fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14_src.lc and ../../acisf04196/products/lightcurves/fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Thu Jun 30 20:30:13 2011] No arf file found
[Thu Jun 30 20:30:16 2011] Updating aperture counts using extracted products
[Thu Jun 30 20:30:16 2011] Error reading totcts from fullrun_ccd7_acisf04196_pi14-548_pass1_cl_src14_src.pi
[Thu Jun 30 20:30:16 2011] No arf file for this source, not re-computing flux