[Thu Sep 29 15:38:12 2011] Detection parameters:
  Position = (138.5, 702.7) = 21 53 34.84 17 36 31.4
  Extent = 1.2" x 0.7", rotation angle = 146 degrees
  Source counts = 1082.9 +/- 33.3
  Background counts = 24.1
  Rate = 0.01 +/- 0.0004

[Thu Sep 29 15:38:13 2011] Off-axis axis estimate = 4.46'
[Thu Sep 29 15:40:31 2011] Using EEF radius (= 0.98 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 15:40:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 15:40:31 2011] Initial guess for spatial extent in simple fitting = 0.98"
[Thu Sep 29 15:40:31 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.010
[Thu Sep 29 15:40:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.98"
[Thu Sep 29 15:40:31 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 29 15:40:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04193_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 15:40:31 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 29 15:40:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04193_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 15:40:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf04193_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf04193_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 15:40:32 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 15:40:32 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 15:40:32 2011] Fit fullrun_ccd6_acisf04193_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 15:40:48 2011] Spatial fit model total counts = 1089.310000, observed total counts = 1090.000000
[Thu Sep 29 15:40:48 2011] Offset between fit and detection position for source 6 = 0.725584 pixels
[Thu Sep 29 15:40:48 2011] 1092.925400 total counts/ 57.645400 bgd. counts: snr = 136.356390
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.725584 pixels
  Position = (139.2, 703.1) = 21 53 34.84 17 36 31.3
  Extent = 1.3 (1.2-1.4)", rotation angle = 0
  Source counts = 1035.3 +/- 33.1
  Background counts = 57.6
  Rate = 0.01 +/- 0.0003
[Thu Sep 29 15:40:48 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 15:40:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 15:40:48 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 15:40:48 2011] Source does appear to be extended
[Thu Sep 29 15:40:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 15:41:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 15:41:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 15:41:30 2011] Initial guess for spatial extent in simple fitting = 1.29"
[Thu Sep 29 15:41:30 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.918
[Thu Sep 29 15:41:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.29"
[Thu Sep 29 15:41:31 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 29 15:41:31 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf04193_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 15:41:31 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 29 15:41:31 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf04193_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 15:41:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf04193_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf04193_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 15:41:32 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 29 15:41:32 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 29 15:41:32 2011] Fit fullrun_ccd6_acisf04193_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 29 15:41:46 2011] Spatial fit model total counts = 1107.760000, observed total counts = 1108.000000
[Thu Sep 29 15:41:46 2011] Offset between fit and detection position for source 6 = 0.184595 pixels
[Thu Sep 29 15:41:46 2011] 1106.290200 total counts/ 12.110200 bgd. counts: snr = 314.422137
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.184595 pixels
  Position = (139.0, 703.3) = 21 53 34.84 17 36 31.4
  Extent = 1.3 (1.3-1.4)", rotation angle = 0
  Source counts = 1094.2 +/- 33.3
  Background counts = 12.1
  Rate = 0.01 +/- 0.0004
[Thu Sep 29 15:41:46 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 15:41:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 15:41:46 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 15:41:46 2011] Source does appear to be extended
[Thu Sep 29 15:41:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 15:43:30 2011] Not overwriting source region fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6_src.reg
[Thu Sep 29 15:43:30 2011] Extracting stamp from image fullrun_ccd6_acisf04193_pi14-548_cl_sm2.00.img.gz, (77, 642) - (201, 765)
[Thu Sep 29 15:43:30 2011] Writing fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6.gif
[Thu Sep 29 15:43:36 2011] ../../acisf04193/products/events/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6_src.evt and ../../acisf04193/products/events/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Thu Sep 29 15:43:36 2011] Size of ../../acisf04193/products/events/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6_src.evt.gz[events] = 1107 counts
[Thu Sep 29 15:43:36 2011] Mean chipx,y = (921.44, 81.75)
[Thu Sep 29 15:43:36 2011] Mean tdetx,y = (3796.44, 1783.75)
[Thu Sep 29 15:43:36 2011] chipx,y range = (899.00-946.00, 60.00-105.00)
[Thu Sep 29 15:43:36 2011] Size of ../../acisf04193/products/events/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 148 counts
[Thu Sep 29 15:43:36 2011] ../../acisf04193/products/images/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6_src.img and ../../acisf04193/products/images/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Thu Sep 29 15:43:36 2011] ../../acisf04193/products/spectra/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6_src.pi and ../../acisf04193/products/spectra/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Thu Sep 29 15:43:41 2011] ../../acisf04193/products/lightcurves/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6_src.lc and ../../acisf04193/products/lightcurves/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Thu Sep 29 15:44:56 2011] Keeping rmf generated by specextract
[Thu Sep 29 15:44:57 2011] 201.939
[Thu Sep 29 15:46:37 2011] Updating aperture counts using extracted products
[Thu Sep 29 15:46:37 2011] Error reading totcts from fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6_src.pi.gz
[Thu Sep 29 15:46:37 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 15:46:37 2011] Using photon index=1.80, rate=0.0115, arf fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6.arf
[Thu Sep 29 15:46:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 15:46:37 2011] Updating source flux to 1.2e-13
[Thu Sep 29 15:47:22 2011] Reading fit data from acisf04193/analysis//spectral/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6_pl.csv
[Thu Sep 29 15:47:22 2011] Spectral fit parameter nH value = 7.83178e+20
[Thu Sep 29 15:47:22 2011] Spectral fit parameter PhoIndex value = 1.62272
[Thu Sep 29 15:47:22 2011] Failed to get F(0.3-8.0) from acisf04193/analysis//spectral/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Thu Sep 29 15:47:22 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 15:47:22 2011] Using Nh = 7.8e+20, photon index=1.62, rate=0.0115, arf fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src6.arf
[Thu Sep 29 15:47:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 15:47:22 2011] Updating source flux to 1.3e-13