[Thu Sep 29 15:38:11 2011] Detection parameters:
  Position = (1007.4, 948.7) = 21 53 4.94 17 38 32.2
  Extent = 2.4" x 2.2", rotation angle = 12 degrees
  Source counts = 174.3 +/- 14.2
  Background counts = 28.7
  Rate = 0.002 +/- 0.0001

[Thu Sep 29 15:38:13 2011] Off-axis axis estimate = 7.05'
[Thu Sep 29 15:40:31 2011] Using EEF radius (= 2.21 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 15:40:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 15:40:31 2011] Initial guess for spatial extent in simple fitting = 2.21"
[Thu Sep 29 15:40:31 2011] source mask rpix=4.5, npix_max = 99, mask sum = 100, frac = 1.005
[Thu Sep 29 15:40:31 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.21"
[Thu Sep 29 15:40:31 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass0_src3.ximg exists
[Thu Sep 29 15:40:31 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf04193_pi14-548_cl_pass0_src3.csv
[Thu Sep 29 15:40:31 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass0_src3_1.ximg exists
[Thu Sep 29 15:40:31 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf04193_pi14-548_cl_pass0_src3.csv
[Thu Sep 29 15:40:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf04193_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf04193_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 15:40:32 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Thu Sep 29 15:40:32 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Sep 29 15:40:32 2011] Fit fullrun_ccd6_acisf04193_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Sep 29 15:40:48 2011] Spatial fit model total counts = 184.561000, observed total counts = 185.000000
[Thu Sep 29 15:40:48 2011] Offset between fit and detection position for source 2 = 1.582423 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.582423 pixels
  Position = (1009.0, 948.5) = 21 53 4.90 17 38 31.9
  Extent = 2.9 (2.5-3.2)", rotation angle = 0
  Source counts = 183.6 +/- 13.5
  Background counts = 0.0
  Rate = 0.002 +/- 0.0001
[Thu Sep 29 15:40:48 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 15:40:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 15:40:48 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 15:40:48 2011] Source does appear to be extended
[Thu Sep 29 15:40:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 15:41:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 15:41:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 15:41:30 2011] Initial guess for spatial extent in simple fitting = 2.86"
[Thu Sep 29 15:41:30 2011] source mask rpix=5.8, npix_max = 159, mask sum = 156, frac = 0.979
[Thu Sep 29 15:41:30 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.86"
[Thu Sep 29 15:41:31 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass1_src3.ximg exists
[Thu Sep 29 15:41:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04193_pi14-548_cl_pass1_src3.csv
[Thu Sep 29 15:41:31 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass1_src3_1.ximg exists
[Thu Sep 29 15:41:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf04193_pi14-548_cl_pass1_src3.csv
[Thu Sep 29 15:41:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf04193_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf04193_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 15:41:32 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Thu Sep 29 15:41:32 2011] fullrun_ccd6_acisf04193_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Sep 29 15:41:32 2011] Fit fullrun_ccd6_acisf04193_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Sep 29 15:41:46 2011] Spatial fit model total counts = 208.684000, observed total counts = 206.000000
[Thu Sep 29 15:41:46 2011] Offset between fit and detection position for source 2 = 0.613066 pixels
[Thu Sep 29 15:41:46 2011] 209.179700 total counts/ 31.414700 bgd. counts: snr = 31.716101
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.613066 pixels
  Position = (1008.4, 948.7) = 21 53 4.92 17 38 32.0
  Extent = 2.8 (2.4-3.1)", rotation angle = 0
  Source counts = 177.8 +/- 14.5
  Background counts = 31.4
  Rate = 0.002 +/- 0.0002
[Thu Sep 29 15:41:46 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 15:41:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 15:41:46 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 15:41:46 2011] Source does appear to be extended
[Thu Sep 29 15:41:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 15:43:30 2011] Not overwriting source region fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src2_src.reg
[Thu Sep 29 15:43:30 2011] Extracting stamp from image fullrun_ccd6_acisf04193_pi14-548_cl_sm2.00.img.gz, (880, 820) - (1137, 1077)
[Thu Sep 29 15:43:30 2011] Writing fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src2.gif
[Thu Sep 29 15:43:45 2011] ../../acisf04193/products/events/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src2_src.evt and ../../acisf04193/products/events/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Sep 29 15:43:45 2011] Size of ../../acisf04193/products/events/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src2_src.evt.gz[events] = 212 counts
[Thu Sep 29 15:43:45 2011] Mean chipx,y = (466.57, 862.62)
[Thu Sep 29 15:43:45 2011] Mean tdetx,y = (3341.57, 2564.62)
[Thu Sep 29 15:43:45 2011] chipx,y range = (430.00-497.00, 830.00-891.00)
[Thu Sep 29 15:43:45 2011] Size of ../../acisf04193/products/events/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 463 counts
[Thu Sep 29 15:43:45 2011] ../../acisf04193/products/images/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src2_src.img and ../../acisf04193/products/images/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Sep 29 15:43:45 2011] ../../acisf04193/products/spectra/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src2_src.pi and ../../acisf04193/products/spectra/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu Sep 29 15:43:49 2011] ../../acisf04193/products/lightcurves/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src2_src.lc and ../../acisf04193/products/lightcurves/fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Sep 29 15:44:57 2011] Keeping rmf generated by specextract
[Thu Sep 29 15:44:57 2011] 185.179
[Thu Sep 29 15:46:37 2011] Updating aperture counts using extracted products
[Thu Sep 29 15:46:37 2011] Error reading totcts from fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Sep 29 15:46:37 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 15:46:37 2011] Using photon index=1.80, rate=0.00187, arf fullrun_ccd6_acisf04193_pi14-548_pass1_cl_src2.arf
[Thu Sep 29 15:46:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 15:46:37 2011] Updating source flux to 2.1e-14