[Thu Sep 29 15:38:09 2011] Detection parameters:
  Position = (1034.3, 847.3) = 21 53 2.05 17 52 45.6
  Extent = 11.8" x 7.8", rotation angle = 139 degrees
  Source counts = 349.8 +/- 32.3
  Background counts = 692.2
  Rate = 0.004 +/- 0.0003

[Thu Sep 29 15:38:10 2011] Off-axis axis estimate = 13.88'
[Thu Sep 29 15:40:29 2011] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 15:40:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 15:40:29 2011] Initial guess for spatial extent in simple fitting = 8.68"
[Thu Sep 29 15:40:29 2011] source mask rpix=17.6, npix_max = 1316, mask sum = 1296, frac = 0.984
[Thu Sep 29 15:40:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 8.68"
[Thu Sep 29 15:40:29 2011] fullrun_ccd3_acisf04193_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 29 15:40:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04193_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 15:40:29 2011] fullrun_ccd3_acisf04193_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 29 15:40:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04193_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 15:40:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04193_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04193_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 15:40:30 2011] fullrun_ccd3_acisf04193_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 15:40:30 2011] fullrun_ccd3_acisf04193_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 15:40:30 2011] Fit fullrun_ccd3_acisf04193_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 15:40:45 2011] Spatial fit model total counts = 1478.180000, observed total counts = 1475.000000
[Thu Sep 29 15:40:45 2011] Offset between fit and detection position for source 1 = 3.162539 pixels
[Thu Sep 29 15:40:45 2011] 1480.143000 total counts/ 804.438000 bgd. counts: snr = 23.823790
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.162539 pixels
  Position = (1034.7, 844.2) = 21 53 2.05 17 52 43.9
  Extent = 12.2 (10.7-13.9)", rotation angle = 0
  Source counts = 675.7 +/- 38.5
  Background counts = 804.4
  Rate = 0.007 +/- 0.0004
[Thu Sep 29 15:40:45 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 15:40:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 15:40:45 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 15:40:45 2011] Source does appear to be extended
[Thu Sep 29 15:40:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 15:41:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 15:41:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 15:41:28 2011] Initial guess for spatial extent in simple fitting = 12.17"
[Thu Sep 29 15:41:28 2011] source mask rpix=24.7, npix_max = 2546, mask sum = 2550, frac = 1.001
[Thu Sep 29 15:41:28 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 12.17"
[Thu Sep 29 15:41:29 2011] fullrun_ccd3_acisf04193_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 29 15:41:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04193_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 15:41:29 2011] fullrun_ccd3_acisf04193_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 29 15:41:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04193_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 15:41:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04193_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04193_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 15:41:29 2011] fullrun_ccd3_acisf04193_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 29 15:41:30 2011] fullrun_ccd3_acisf04193_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 29 15:41:30 2011] Fit fullrun_ccd3_acisf04193_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 29 15:41:43 2011] Spatial fit model total counts = 2039.020000, observed total counts = 2037.000000
[Thu Sep 29 15:41:43 2011] Offset between fit and detection position for source 1 = 2.368278 pixels
[Thu Sep 29 15:41:43 2011] 2040.848000 total counts/ 1160.130000 bgd. counts: snr = 25.857322
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.368278 pixels
  Position = (1035.2, 846.5) = 21 53 2.03 17 52 45.0
  Extent = 14.2 (12.9-15.7)", rotation angle = 0
  Source counts = 880.7 +/- 45.2
  Background counts = 1160.1
  Rate = 0.009 +/- 0.0005
[Thu Sep 29 15:41:43 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 15:41:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 15:41:43 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 15:41:43 2011] Source does appear to be extended
[Thu Sep 29 15:41:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 15:42:44 2011] Not overwriting source region fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1_src.reg
[Thu Sep 29 15:42:44 2011] Extracting stamp from image fullrun_ccd3_acisf04193_pi14-548_cl_sm2.00.img.gz, (387, 198) - (1461, 1461)
[Thu Sep 29 15:42:44 2011] Writing fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1.gif
[Thu Sep 29 15:42:46 2011] ../../acisf04193/products/events/fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1_src.evt and ../../acisf04193/products/events/fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Sep 29 15:42:46 2011] Size of ../../acisf04193/products/events/fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1_src.evt.gz[events] = 2115 counts
[Thu Sep 29 15:42:46 2011] Mean chipx,y = (815.43, 649.65)
[Thu Sep 29 15:42:46 2011] Mean tdetx,y = (4482.35, 3876.43)
[Thu Sep 29 15:42:46 2011] chipx,y range = (685.00-941.00, 523.00-773.00)
[Thu Sep 29 15:42:46 2011] Size of ../../acisf04193/products/events/fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 6823 counts
[Thu Sep 29 15:42:46 2011] ../../acisf04193/products/images/fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1_src.img and ../../acisf04193/products/images/fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Sep 29 15:42:46 2011] ../../acisf04193/products/spectra/fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1_src.pi and ../../acisf04193/products/spectra/fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Sep 29 15:42:49 2011] ../../acisf04193/products/lightcurves/fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1_src.lc and ../../acisf04193/products/lightcurves/fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Sep 29 15:43:23 2011] Keeping rmf generated by specextract
[Thu Sep 29 15:43:23 2011] 146.531
[Thu Sep 29 15:46:37 2011] Updating aperture counts using extracted products
[Thu Sep 29 15:46:37 2011] Error reading totcts from fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Sep 29 15:46:37 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 15:46:37 2011] Using photon index=1.80, rate=0.00927, arf fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1.arf
[Thu Sep 29 15:46:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 15:46:37 2011] Updating source flux to 1.3e-13
[Thu Sep 29 15:46:47 2011] Reading fit data from acisf04193/analysis//spectral/fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1_pl.csv
[Thu Sep 29 15:46:47 2011] Spectral fit parameter nH value = 2.85334e+20
[Thu Sep 29 15:46:47 2011] Spectral fit parameter PhoIndex value = 2.18411
[Thu Sep 29 15:46:47 2011] Failed to get F(0.3-8.0) from acisf04193/analysis//spectral/fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Sep 29 15:46:47 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 15:46:47 2011] Using Nh = 2.9e+20, photon index=2.18, rate=0.00927, arf fullrun_ccd3_acisf04193_pi14-548_pass1_cl_src1.arf
[Thu Sep 29 15:46:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 15:46:47 2011] Updating source flux to 1.2e-13