[Tue Sep 27 19:01:04 2011] Detection parameters:
  Position = (836.8, 143.9) = 2 57 22.88 5 54 16.6
  Extent = 5.2" x 2.0", rotation angle = 29 degrees
  Source counts = 71.3 +/- 9.7
  Background counts = 22.7
  Rate = 0.003 +/- 0.0005

[Tue Sep 27 19:01:04 2011] Off-axis axis estimate = 9.54'
[Tue Sep 27 19:01:51 2011] Using EEF radius (= 4.03 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 19:01:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 19:01:51 2011] Initial guess for spatial extent in simple fitting = 4.03"
[Tue Sep 27 19:01:51 2011] source mask rpix=8.2, npix_max = 302, mask sum = 306, frac = 1.013
[Tue Sep 27 19:01:51 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 4.03"
[Tue Sep 27 19:01:52 2011] fullrun_ccd3_acisf04181_pi14-548_cl_pass0_src3.ximg exists
[Tue Sep 27 19:01:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04181_pi14-548_cl_pass0_src3.csv
[Tue Sep 27 19:01:52 2011] fullrun_ccd3_acisf04181_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Sep 27 19:01:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04181_pi14-548_cl_pass0_src3.csv
[Tue Sep 27 19:01:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04181_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04181_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 19:01:53 2011] fullrun_ccd3_acisf04181_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Sep 27 19:01:53 2011] fullrun_ccd3_acisf04181_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Sep 27 19:01:53 2011] Fit fullrun_ccd3_acisf04181_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Sep 27 19:02:01 2011] Spatial fit model total counts = 97.410600, observed total counts = 98.000000
[Tue Sep 27 19:02:01 2011] Offset between fit and detection position for source 14 = 2.484349 pixels
[Tue Sep 27 19:02:01 2011] 97.945100 total counts/ 61.522000 bgd. counts: snr = 4.643674
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 2.484349 pixels
  Position = (838.5, 145.8) = 2 57 22.84 5 54 17.2
  Extent = 1.3 (1.0-2.8)", rotation angle = 0
  Source counts = 36.4 +/- 9.9
  Background counts = 61.5
  Rate = 0.002 +/- 0.0005
[Tue Sep 27 19:02:01 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 19:02:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 19:02:01 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 19:02:01 2011] Source does appear to be extended
[Tue Sep 27 19:02:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 19:02:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 19:02:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 19:02:20 2011] Initial guess for spatial extent in simple fitting = 1.30"
[Tue Sep 27 19:02:20 2011] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.065
[Tue Sep 27 19:02:20 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.30"
[Tue Sep 27 19:02:21 2011] fullrun_ccd3_acisf04181_pi14-548_cl_pass1_src3.ximg exists
[Tue Sep 27 19:02:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04181_pi14-548_cl_pass1_src3.csv
[Tue Sep 27 19:02:21 2011] fullrun_ccd3_acisf04181_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Sep 27 19:02:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04181_pi14-548_cl_pass1_src3.csv
[Tue Sep 27 19:02:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04181_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04181_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 19:02:21 2011] fullrun_ccd3_acisf04181_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Sep 27 19:02:21 2011] fullrun_ccd3_acisf04181_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Sep 27 19:02:21 2011] Fit fullrun_ccd3_acisf04181_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Sep 27 19:02:29 2011] Spatial fit model total counts = 46.993200, observed total counts = 47.000000
[Tue Sep 27 19:02:29 2011] Offset between fit and detection position for source 14 = 0.438061 pixels
[Tue Sep 27 19:02:29 2011] 46.193700 total counts/ 19.759800 bgd. counts: snr = 5.946617
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.438061 pixels
  Position = (838.9, 145.8) = 2 57 22.83 5 54 17.2
  Extent = 0.9 (0.5-1.4)", rotation angle = 0
  Source counts = 26.4 +/- 6.8
  Background counts = 19.8
  Rate = 0.001 +/- 0.0003
[Tue Sep 27 19:02:29 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 19:02:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 19:02:29 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 19:02:29 2011] Source does appear to be extended
[Tue Sep 27 19:02:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 19:04:31 2011] Not overwriting source region fullrun_ccd3_acisf04181_pi14-548_pass1_cl_src14_src.reg
[Tue Sep 27 19:04:31 2011] Extracting stamp from image fullrun_ccd3_acisf04181_pi14-548_cl_sm2.00.img.gz, (798, 105) - (880, 187)
[Tue Sep 27 19:04:31 2011] Writing fullrun_ccd3_acisf04181_pi14-548_pass1_cl_src14.gif
[Tue Sep 27 19:04:38 2011] ../../acisf04181/products/events/fullrun_ccd3_acisf04181_pi14-548_pass1_cl_src14_src.evt and ../../acisf04181/products/events/fullrun_ccd3_acisf04181_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Tue Sep 27 19:04:38 2011] Size of ../../acisf04181/products/events/fullrun_ccd3_acisf04181_pi14-548_pass1_cl_src14_src.evt.gz[events] = 38 counts
[Tue Sep 27 19:04:38 2011] Mean chipx,y = (208.97, 116.71)
[Tue Sep 27 19:04:38 2011] Mean tdetx,y = (5015.29, 3269.97)
[Tue Sep 27 19:04:38 2011] chipx,y range = (191.00-228.00, 97.00-136.00)
[Tue Sep 27 19:04:38 2011] Size of ../../acisf04181/products/events/fullrun_ccd3_acisf04181_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 41 counts
[Tue Sep 27 19:04:38 2011] ../../acisf04181/products/images/fullrun_ccd3_acisf04181_pi14-548_pass1_cl_src14_src.img and ../../acisf04181/products/images/fullrun_ccd3_acisf04181_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Tue Sep 27 19:04:38 2011] ../../acisf04181/products/spectra/fullrun_ccd3_acisf04181_pi14-548_pass1_cl_src14_src.pi and ../../acisf04181/products/spectra/fullrun_ccd3_acisf04181_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Tue Sep 27 19:04:38 2011] Not generating rmf since there are only 26 counts
[Tue Sep 27 19:04:40 2011] ../../acisf04181/products/lightcurves/fullrun_ccd3_acisf04181_pi14-548_pass1_cl_src14_src.lc and ../../acisf04181/products/lightcurves/fullrun_ccd3_acisf04181_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Tue Sep 27 19:05:10 2011] 158.173
[Tue Sep 27 19:05:13 2011] Updating aperture counts using extracted products
[Tue Sep 27 19:05:13 2011] Error reading totcts from fullrun_ccd3_acisf04181_pi14-548_pass1_cl_src14_src.pi.gz
[Tue Sep 27 19:05:13 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 19:05:13 2011] Using photon index=1.80, rate=0.00123, arf fullrun_ccd3_acisf04181_pi14-548_pass1_cl_src14.arf
[Tue Sep 27 19:05:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 19:05:13 2011] Updating source flux to 1.7e-14
[Tue Sep 27 19:05:25 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting