[Tue Oct 25 18:20:05 2011] Detection parameters:
  Position = (600.2, 494.1) = 0 56 6.45 -1 19 58.8
  Extent = 1.3" x 1.0", rotation angle = 27 degrees
  Source counts = 146.1 +/- 12.4
  Background counts = 6.9
  Rate = 0.01 +/- 0.001

[Tue Oct 25 18:20:05 2011] Off-axis axis estimate = 6.23'
[Tue Oct 25 18:20:38 2011] Using EEF radius (= 1.75 ")to estimate initial spatial extent for simple fitting
[Tue Oct 25 18:20:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 25 18:20:38 2011] Initial guess for spatial extent in simple fitting = 1.75"
[Tue Oct 25 18:20:38 2011] source mask rpix=3.6, npix_max = 65, mask sum = 64, frac = 0.972
[Tue Oct 25 18:20:38 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.75"
[Tue Oct 25 18:20:38 2011] fullrun_ccd3_acisf04180_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct 25 18:20:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04180_pi14-548_cl_pass0_src1.csv
[Tue Oct 25 18:20:38 2011] fullrun_ccd3_acisf04180_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct 25 18:20:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04180_pi14-548_cl_pass0_src1.csv
[Tue Oct 25 18:20:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04180_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04180_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 18:20:39 2011] fullrun_ccd3_acisf04180_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct 25 18:20:39 2011] fullrun_ccd3_acisf04180_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct 25 18:20:39 2011] Fit fullrun_ccd3_acisf04180_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct 25 18:20:45 2011] Spatial fit model total counts = 159.522000, observed total counts = 161.000000
[Tue Oct 25 18:20:45 2011] Offset between fit and detection position for source 14 = 1.019225 pixels
[Tue Oct 25 18:20:45 2011] 159.334500 total counts/ 19.105500 bgd. counts: snr = 32.081793
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 1.019225 pixels
  Position = (601.1, 494.7) = 0 56 6.44 -1 19 58.7
  Extent = 1.2 (1.1-1.3)", rotation angle = 0
  Source counts = 140.2 +/- 12.6
  Background counts = 19.1
  Rate = 0.01 +/- 0.001
[Tue Oct 25 18:20:45 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 18:20:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 18:20:45 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 18:20:45 2011] Source does appear to be extended
[Tue Oct 25 18:20:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 18:21:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 25 18:21:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 25 18:21:00 2011] Initial guess for spatial extent in simple fitting = 1.20"
[Tue Oct 25 18:21:00 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.038
[Tue Oct 25 18:21:00 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.20"
[Tue Oct 25 18:21:01 2011] fullrun_ccd3_acisf04180_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct 25 18:21:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04180_pi14-548_cl_pass1_src1.csv
[Tue Oct 25 18:21:01 2011] fullrun_ccd3_acisf04180_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct 25 18:21:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04180_pi14-548_cl_pass1_src1.csv
[Tue Oct 25 18:21:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04180_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04180_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 18:21:01 2011] fullrun_ccd3_acisf04180_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct 25 18:21:01 2011] fullrun_ccd3_acisf04180_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct 25 18:21:01 2011] Fit fullrun_ccd3_acisf04180_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct 25 18:21:08 2011] Spatial fit model total counts = 152.622000, observed total counts = 152.000000
[Tue Oct 25 18:21:08 2011] Offset between fit and detection position for source 14 = 0.174219 pixels
[Tue Oct 25 18:21:08 2011] 151.863500 total counts/ 18.460500 bgd. counts: snr = 31.048732
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.174219 pixels
  Position = (601.2, 494.8) = 0 56 6.43 -1 19 58.7
  Extent = 1.1 (0.9-1.3)", rotation angle = 0
  Source counts = 133.4 +/- 12.3
  Background counts = 18.5
  Rate = 0.01 +/- 0.001
[Tue Oct 25 18:21:08 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 18:21:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 18:21:08 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 18:21:08 2011] Source does appear to be extended
[Tue Oct 25 18:21:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 18:22:11 2011] Not overwriting source region fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14_src.reg
[Tue Oct 25 18:22:11 2011] Extracting stamp from image fullrun_ccd3_acisf04180_pi14-548_cl_sm2.00.img.gz, (549, 443) - (653, 547)
[Tue Oct 25 18:22:11 2011] Writing fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14.gif
[Tue Oct 25 18:22:12 2011] ../../acisf04180/products/events/fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14_src.evt and ../../acisf04180/products/events/fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Tue Oct 25 18:22:12 2011] Size of ../../acisf04180/products/events/fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14_src.evt.gz[events] = 147 counts
[Tue Oct 25 18:22:12 2011] Mean chipx,y = (487.38, 415.73)
[Tue Oct 25 18:22:12 2011] Mean tdetx,y = (4716.27, 3548.38)
[Tue Oct 25 18:22:12 2011] chipx,y range = (464.00-505.00, 392.00-439.00)
[Tue Oct 25 18:22:12 2011] Size of ../../acisf04180/products/events/fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 43 counts
[Tue Oct 25 18:22:12 2011] ../../acisf04180/products/images/fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14_src.img and ../../acisf04180/products/images/fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Tue Oct 25 18:22:12 2011] ../../acisf04180/products/spectra/fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14_src.pi and ../../acisf04180/products/spectra/fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Tue Oct 25 18:22:15 2011] ../../acisf04180/products/lightcurves/fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14_src.lc and ../../acisf04180/products/lightcurves/fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Tue Oct 25 18:22:52 2011] Keeping rmf generated by specextract
[Tue Oct 25 18:22:52 2011] 177.862
[Tue Oct 25 18:22:58 2011] Updating aperture counts using extracted products
[Tue Oct 25 18:22:58 2011] Error reading totcts from fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14_src.pi.gz
[Tue Oct 25 18:22:58 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 25 18:22:58 2011] Using photon index=1.80, rate=0.0112, arf fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14.arf
[Tue Oct 25 18:22:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 25 18:22:58 2011] Updating source flux to 1.4e-13
[Tue Oct 25 18:23:11 2011] Reading fit data from acisf04180/analysis//spectral/fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14_pl.csv
[Tue Oct 25 18:23:11 2011] Spectral fit parameter nH value = 5.53478e+20
[Tue Oct 25 18:23:11 2011] Spectral fit parameter PhoIndex value = 2.14399
[Tue Oct 25 18:23:11 2011] Failed to get F(0.3-8.0) from acisf04180/analysis//spectral/fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14_pl.csv, possibly due to different flux energy range selected
[Tue Oct 25 18:23:11 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 25 18:23:11 2011] Using Nh = 5.5e+20, photon index=2.14, rate=0.0112, arf fullrun_ccd3_acisf04180_pi14-548_pass1_cl_src14.arf
[Tue Oct 25 18:23:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 25 18:23:11 2011] Updating source flux to 1.3e-13