[Sun Sep 25 00:49:23 2011] Detection parameters:
  Position = (822.8, 572.1) = 3 40 1.64 -35 17 16.9
  Extent = 0.9" x 0.7", rotation angle = 144 degrees
  Source counts = 26.5 +/- 5.4
  Background counts = 2.5
  Rate = 0.0006 +/- 0.0001

[Sun Sep 25 00:49:24 2011] Off-axis axis estimate = 4.72'
[Sun Sep 25 00:50:34 2011] Using EEF radius (= 1.07 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 00:50:34 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Sun Sep 25 00:50:34 2011] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.253
[Sun Sep 25 00:50:34 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 1.07"
[Sun Sep 25 00:50:34 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src12.ximg exists
[Sun Sep 25 00:50:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src12.csv
[Sun Sep 25 00:50:34 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src12_1.ximg exists
[Sun Sep 25 00:50:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src12.csv
[Sun Sep 25 00:50:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 00:50:35 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sun Sep 25 00:50:35 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Sep 25 00:50:35 2011] Fit fullrun_ccd3_acisf04177_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Sep 25 00:50:49 2011] Spatial fit model total counts = 29.765900, observed total counts = 30.000000
[Sun Sep 25 00:50:49 2011] Offset between fit and detection position for source 7 = 0.583364 pixels
[Sun Sep 25 00:50:49 2011] 30.345060 total counts/ 5.694660 bgd. counts: snr = 10.329756
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.583364 pixels
  Position = (823.3, 572.5) = 3 40 1.64 -35 17 17.0
  Extent = 0.8 (0.6-1.3)", rotation angle = 0
  Source counts = 24.7 +/- 5.5
  Background counts = 5.7
  Rate = 0.0005 +/- 0.0001
[Sun Sep 25 00:50:49 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 00:50:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 00:50:49 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 00:50:49 2011] Source does appear to be extended
[Sun Sep 25 00:50:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 00:51:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 00:51:18 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Sun Sep 25 00:51:18 2011] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.265
[Sun Sep 25 00:51:18 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.85"
[Sun Sep 25 00:51:19 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src12.ximg exists
[Sun Sep 25 00:51:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src12.csv
[Sun Sep 25 00:51:19 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src12_1.ximg exists
[Sun Sep 25 00:51:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src12.csv
[Sun Sep 25 00:51:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 00:51:20 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Sun Sep 25 00:51:20 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Sep 25 00:51:20 2011] Fit fullrun_ccd3_acisf04177_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Sep 25 00:51:37 2011] Spatial fit model total counts = 29.739600, observed total counts = 30.000000
[Sun Sep 25 00:51:37 2011] Offset between fit and detection position for source 7 = 0.003210 pixels
[Sun Sep 25 00:51:37 2011] 30.344020 total counts/ 6.000720 bgd. counts: snr = 9.937514
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.003210 pixels
  Position = (823.3, 572.5) = 3 40 1.64 -35 17 17.0
  Extent = 0.8 (0.6-1.3)", rotation angle = 0
  Source counts = 24.3 +/- 5.5
  Background counts = 6.0
  Rate = 0.0005 +/- 0.0001
[Sun Sep 25 00:51:37 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 00:51:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 00:51:37 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 00:51:37 2011] Source does appear to be extended
[Sun Sep 25 00:51:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 00:55:43 2011] Not overwriting source region fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src7_src.reg
[Sun Sep 25 00:55:43 2011] Extracting stamp from image fullrun_ccd3_acisf04177_pi14-548_cl_sm2.00.img.gz, (786, 535) - (861, 610)
[Sun Sep 25 00:55:43 2011] Writing fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src7.gif
[Sun Sep 25 00:56:18 2011] ../../acisf04177/products/events/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src7_src.evt and ../../acisf04177/products/events/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sun Sep 25 00:56:19 2011] Size of ../../acisf04177/products/events/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src7_src.evt.gz[events] = 30 counts
[Sun Sep 25 00:56:19 2011] Mean chipx,y = (454.80, 737.23)
[Sun Sep 25 00:56:19 2011] Mean tdetx,y = (4394.77, 3515.80)
[Sun Sep 25 00:56:19 2011] chipx,y range = (435.00-472.00, 720.00-755.00)
[Sun Sep 25 00:56:19 2011] Size of ../../acisf04177/products/events/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 32 counts
[Sun Sep 25 00:56:19 2011] ../../acisf04177/products/images/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src7_src.img and ../../acisf04177/products/images/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Sun Sep 25 00:56:19 2011] ../../acisf04177/products/spectra/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src7_src.pi and ../../acisf04177/products/spectra/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sun Sep 25 00:56:19 2011] Not generating rmf since there are only 24 counts
[Sun Sep 25 00:56:21 2011] ../../acisf04177/products/lightcurves/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src7_src.lc and ../../acisf04177/products/lightcurves/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sun Sep 25 00:56:49 2011] 184.867
[Sun Sep 25 00:57:10 2011] Updating aperture counts using extracted products
[Sun Sep 25 00:57:10 2011] Error reading totcts from fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src7_src.pi.gz
[Sun Sep 25 00:57:10 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 00:57:10 2011] Using photon index=1.80, rate=0.000518, arf fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src7.arf
[Sun Sep 25 00:57:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 00:57:10 2011] Updating source flux to 6.3e-15
[Sun Sep 25 00:57:31 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting