[Sun Sep 25 00:49:24 2011] Detection parameters:
  Position = (849.6, 1126.6) = 3 40 0.56 -35 12 44.1
  Extent = 0.7" x 0.5", rotation angle = 177 degrees
  Source counts = 14.3 +/- 4.0
  Background counts = 1.7
  Rate = 0.0003 +/- 9e-05

[Sun Sep 25 00:49:24 2011] Off-axis axis estimate = 1.21'
[Sun Sep 25 00:50:34 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 00:50:34 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Sep 25 00:50:34 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.380
[Sun Sep 25 00:50:34 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.38"
[Sun Sep 25 00:50:35 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src16.ximg exists
[Sun Sep 25 00:50:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src16.csv
[Sun Sep 25 00:50:35 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src16_1.ximg exists
[Sun Sep 25 00:50:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src16.csv
[Sun Sep 25 00:50:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 00:50:35 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Sun Sep 25 00:50:35 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Sep 25 00:50:35 2011] Fit fullrun_ccd3_acisf04177_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Sep 25 00:50:49 2011] Spatial fit model total counts = 17.230600, observed total counts = 18.000000
[Sun Sep 25 00:50:49 2011] Offset between fit and detection position for source 20 = 1.187848 pixels
[Sun Sep 25 00:50:49 2011] 17.936960 total counts/ 6.828860 bgd. counts: snr = 4.250751
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.187848 pixels
  Position = (850.5, 1127.3) = 3 40 0.54 -35 12 44.0
  Extent = 0.4 (0.1-0.5)", rotation angle = 0
  Source counts = 11.1 +/- 4.2
  Background counts = 6.8
  Rate = 0.0002 +/- 9e-05
[Sun Sep 25 00:50:49 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 00:50:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 00:50:49 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 00:50:49 2011] Source does appear to be extended
[Sun Sep 25 00:50:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 00:51:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 00:51:18 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Sep 25 00:51:18 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.381
[Sun Sep 25 00:51:18 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.38"
[Sun Sep 25 00:51:19 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src16.ximg exists
[Sun Sep 25 00:51:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src16.csv
[Sun Sep 25 00:51:19 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src16_1.ximg exists
[Sun Sep 25 00:51:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src16.csv
[Sun Sep 25 00:51:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 00:51:20 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Sun Sep 25 00:51:20 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Sep 25 00:51:20 2011] Fit fullrun_ccd3_acisf04177_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Sun Sep 25 00:51:37 2011] Spatial fit model total counts = 19.006300, observed total counts = 19.000000
[Sun Sep 25 00:51:37 2011] Offset between fit and detection position for source 20 = 0.038955 pixels
[Sun Sep 25 00:51:37 2011] 19.628780 total counts/ 7.974980 bgd. counts: snr = 4.126699
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.038955 pixels
  Position = (850.6, 1127.3) = 3 40 0.54 -35 12 44.0
  Extent = 0.4 (0.1-0.6)", rotation angle = 0
  Source counts = 11.7 +/- 4.4
  Background counts = 8.0
  Rate = 0.0002 +/- 9e-05
[Sun Sep 25 00:51:37 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 00:51:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 00:51:37 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 00:51:37 2011] Source does appear to be extended
[Sun Sep 25 00:51:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 00:55:43 2011] Not overwriting source region fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src20_src.reg
[Sun Sep 25 00:55:43 2011] Extracting stamp from image fullrun_ccd3_acisf04177_pi14-548_cl_sm2.00.img.gz, (834, 1110) - (867, 1144)
[Sun Sep 25 00:55:43 2011] Writing fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src20.gif
[Sun Sep 25 00:56:30 2011] ../../acisf04177/products/events/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src20_src.evt and ../../acisf04177/products/events/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Sun Sep 25 00:56:30 2011] Size of ../../acisf04177/products/events/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src20_src.evt.gz[events] = 13 counts
[Sun Sep 25 00:56:30 2011] Mean chipx,y = (997.31, 858.38)
[Sun Sep 25 00:56:30 2011] Mean tdetx,y = (4273.62, 4058.31)
[Sun Sep 25 00:56:30 2011] chipx,y range = (978.00-1013.00, 841.00-875.00)
[Sun Sep 25 00:56:30 2011] Size of ../../acisf04177/products/events/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 10 counts
[Sun Sep 25 00:56:30 2011] ../../acisf04177/products/images/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src20_src.img and ../../acisf04177/products/images/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Sun Sep 25 00:56:30 2011] ../../acisf04177/products/spectra/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src20_src.pi and ../../acisf04177/products/spectra/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Sun Sep 25 00:56:30 2011] Not generating rmf since there are only 11 counts
[Sun Sep 25 00:56:33 2011] ../../acisf04177/products/lightcurves/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src20_src.lc and ../../acisf04177/products/lightcurves/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Sun Sep 25 00:56:49 2011] 203.977
[Sun Sep 25 00:57:10 2011] Updating aperture counts using extracted products
[Sun Sep 25 00:57:10 2011] Error reading totcts from fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src20_src.pi.gz
[Sun Sep 25 00:57:10 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 00:57:10 2011] Using photon index=1.80, rate=0.000248, arf fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src20.arf
[Sun Sep 25 00:57:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 00:57:10 2011] Updating source flux to 2.7e-15
[Sun Sep 25 00:57:31 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting