[Sun Sep 25 00:49:23 2011] Detection parameters:
  Position = (598.4, 643.2) = 3 40 10.65 -35 16 41.9
  Extent = 1.0" x 0.5", rotation angle = 156 degrees
  Source counts = 21.7 +/- 4.9
  Background counts = 2.3
  Rate = 0.0005 +/- 0.0001

[Sun Sep 25 00:49:24 2011] Off-axis axis estimate = 5.10'
[Sun Sep 25 00:50:34 2011] Using EEF radius (= 1.22 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 00:50:34 2011] Initial guess for spatial extent in simple fitting = 1.22"
[Sun Sep 25 00:50:34 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.012
[Sun Sep 25 00:50:34 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 1.22"
[Sun Sep 25 00:50:34 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src15.ximg exists
[Sun Sep 25 00:50:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src15.csv
[Sun Sep 25 00:50:35 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src15_1.ximg exists
[Sun Sep 25 00:50:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src15.csv
[Sun Sep 25 00:50:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04177_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 00:50:35 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Sun Sep 25 00:50:35 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Sep 25 00:50:35 2011] Fit fullrun_ccd3_acisf04177_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Sep 25 00:50:49 2011] Spatial fit model total counts = 27.914700, observed total counts = 28.000000
[Sun Sep 25 00:50:49 2011] Offset between fit and detection position for source 10 = 0.723813 pixels
[Sun Sep 25 00:50:49 2011] 28.319250 total counts/ 8.962650 bgd. counts: snr = 6.465630
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.723813 pixels
  Position = (599.1, 643.5) = 3 40 10.65 -35 16 42.0
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 19.4 +/- 5.3
  Background counts = 9.0
  Rate = 0.0004 +/- 0.0001
[Sun Sep 25 00:50:49 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 00:50:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 00:50:49 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 00:50:49 2011] Source does appear to be extended
[Sun Sep 25 00:50:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 00:51:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 00:51:18 2011] Initial guess for spatial extent in simple fitting = 0.86"
[Sun Sep 25 00:51:18 2011] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.990
[Sun Sep 25 00:51:18 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.86"
[Sun Sep 25 00:51:19 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src15.ximg exists
[Sun Sep 25 00:51:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src15.csv
[Sun Sep 25 00:51:19 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src15_1.ximg exists
[Sun Sep 25 00:51:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src15.csv
[Sun Sep 25 00:51:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04177_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 00:51:20 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Sun Sep 25 00:51:20 2011] fullrun_ccd3_acisf04177_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Sep 25 00:51:20 2011] Fit fullrun_ccd3_acisf04177_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Sep 25 00:51:37 2011] Spatial fit model total counts = 28.936000, observed total counts = 29.000000
[Sun Sep 25 00:51:37 2011] Offset between fit and detection position for source 10 = 0.169100 pixels
[Sun Sep 25 00:51:37 2011] 29.399400 total counts/ 10.814800 bgd. counts: snr = 5.651243
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.169100 pixels
  Position = (598.9, 643.6) = 3 40 10.65 -35 16 42.0
  Extent = 0.8 (0.5-1.2)", rotation angle = 0
  Source counts = 18.6 +/- 5.4
  Background counts = 10.8
  Rate = 0.0004 +/- 0.0001
[Sun Sep 25 00:51:37 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 00:51:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 00:51:37 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 00:51:37 2011] Source does appear to be extended
[Sun Sep 25 00:51:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 00:55:43 2011] Not overwriting source region fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src10_src.reg
[Sun Sep 25 00:55:43 2011] Extracting stamp from image fullrun_ccd3_acisf04177_pi14-548_cl_sm2.00.img.gz, (561, 606) - (637, 681)
[Sun Sep 25 00:55:43 2011] Writing fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src10.gif
[Sun Sep 25 00:56:27 2011] ../../acisf04177/products/events/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src10_src.evt and ../../acisf04177/products/events/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun Sep 25 00:56:27 2011] Size of ../../acisf04177/products/events/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src10_src.evt.gz[events] = 24 counts
[Sun Sep 25 00:56:27 2011] Mean chipx,y = (559.12, 529.17)
[Sun Sep 25 00:56:27 2011] Mean tdetx,y = (4602.83, 3620.12)
[Sun Sep 25 00:56:27 2011] chipx,y range = (540.00-578.00, 513.00-549.00)
[Sun Sep 25 00:56:27 2011] Size of ../../acisf04177/products/events/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 32 counts
[Sun Sep 25 00:56:27 2011] ../../acisf04177/products/images/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src10_src.img and ../../acisf04177/products/images/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun Sep 25 00:56:27 2011] ../../acisf04177/products/spectra/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src10_src.pi and ../../acisf04177/products/spectra/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sun Sep 25 00:56:27 2011] Not generating rmf since there are only 18 counts
[Sun Sep 25 00:56:30 2011] ../../acisf04177/products/lightcurves/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src10_src.lc and ../../acisf04177/products/lightcurves/fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun Sep 25 00:56:49 2011] 184.417
[Sun Sep 25 00:57:10 2011] Updating aperture counts using extracted products
[Sun Sep 25 00:57:10 2011] Error reading totcts from fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src10_src.pi.gz
[Sun Sep 25 00:57:10 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 00:57:10 2011] Using photon index=1.80, rate=0.000396, arf fullrun_ccd3_acisf04177_pi14-548_pass1_cl_src10.arf
[Sun Sep 25 00:57:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 00:57:10 2011] Updating source flux to 4.9e-15
[Sun Sep 25 00:57:31 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting