[Tue Apr 10 18:43:04 2012] Detection parameters:
  Position = (1022.7, 695.2) = 3 38 46.90 -35 47 17.7
  Extent = 3.2" x 2.2", rotation angle = 42 degrees
  Source counts = 696.4 +/- 27.7
  Background counts = 68.6
  Rate = 0.02 +/- 0.0008

[Tue Apr 10 18:43:05 2012] Off-axis axis estimate = 8.86'
[Tue Apr 10 18:44:14 2012] Using EEF radius (= 3.47 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:44:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 18:44:14 2012] Initial guess for spatial extent in simple fitting = 3.47"
[Tue Apr 10 18:44:14 2012] source mask rpix=7.0, npix_max = 227, mask sum = 225, frac = 0.988
[Tue Apr 10 18:44:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.47"
[Tue Apr 10 18:44:15 2012] fullrun_ccd2_acisf04175_pi14-548_cl_pass0_src1.ximg exists
[Tue Apr 10 18:44:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04175_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 18:44:15 2012] fullrun_ccd2_acisf04175_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Apr 10 18:44:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04175_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 18:44:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04175_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04175_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:44:15 2012] fullrun_ccd2_acisf04175_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 18:44:15 2012] fullrun_ccd2_acisf04175_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 18:44:15 2012] Fit fullrun_ccd2_acisf04175_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 18:44:26 2012] Spatial fit model total counts = 1157.000000, observed total counts = 1157.000000
[Tue Apr 10 18:44:26 2012] Offset between fit and detection position for source 1 = 1.176069 pixels
[Tue Apr 10 18:44:26 2012] 1156.574000 total counts/ 179.696000 bgd. counts: snr = 72.873751
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.176069 pixels
  Position = (1023.8, 695.6) = 3 38 46.87 -35 47 17.7
  Extent = 3.1 (2.9-3.3)", rotation angle = 0
  Source counts = 976.9 +/- 34.0
  Background counts = 179.7
  Rate = 0.02 +/- 0.0006
[Tue Apr 10 18:44:26 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:44:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:44:26 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:44:26 2012] Source does appear to be extended
[Tue Apr 10 18:44:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:44:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:44:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 18:44:46 2012] Initial guess for spatial extent in simple fitting = 3.11"
[Tue Apr 10 18:44:46 2012] source mask rpix=6.3, npix_max = 186, mask sum = 182, frac = 0.976
[Tue Apr 10 18:44:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.11"
[Tue Apr 10 18:44:46 2012] fullrun_ccd2_acisf04175_pi14-548_cl_pass1_src1.ximg exists
[Tue Apr 10 18:44:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04175_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 18:44:46 2012] fullrun_ccd2_acisf04175_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Apr 10 18:44:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04175_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 18:44:46 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04175_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04175_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:44:47 2012] fullrun_ccd2_acisf04175_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 18:44:47 2012] fullrun_ccd2_acisf04175_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 18:44:47 2012] Fit fullrun_ccd2_acisf04175_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 18:44:57 2012] Spatial fit model total counts = 1131.000000, observed total counts = 1131.000000
[Tue Apr 10 18:44:57 2012] Offset between fit and detection position for source 1 = 0.051451 pixels
[Tue Apr 10 18:44:57 2012] 1130.278000 total counts/ 174.005000 bgd. counts: snr = 72.493827
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.051451 pixels
  Position = (1023.9, 695.6) = 3 38 46.87 -35 47 17.7
  Extent = 3.0 (2.9-3.2)", rotation angle = 0
  Source counts = 956.3 +/- 33.6
  Background counts = 174.0
  Rate = 0.02 +/- 0.0006
[Tue Apr 10 18:44:57 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:44:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:44:57 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:44:57 2012] Source does appear to be extended
[Tue Apr 10 18:44:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:46:50 2012] Not overwriting source region fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1_src.reg
[Tue Apr 10 18:46:50 2012] Extracting stamp from image fullrun_ccd2_acisf04175_pi14-548_cl_sm2.00.img.gz, (885, 557) - (1163, 835)
[Tue Apr 10 18:46:50 2012] Writing fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1.gif
[Tue Apr 10 18:46:51 2012] ../../acisf04175/products/events/fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1_src.evt and ../../acisf04175/products/events/fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 18:46:51 2012] Size of ../../acisf04175/products/events/fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1096 counts
[Tue Apr 10 18:46:51 2012] Mean chipx,y = (488.93, 75.98)
[Tue Apr 10 18:46:51 2012] Mean tdetx,y = (3136.98, 3597.07)
[Tue Apr 10 18:46:51 2012] chipx,y range = (452.00-530.00, 40.00-113.00)
[Tue Apr 10 18:46:51 2012] Size of ../../acisf04175/products/events/fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 517 counts
[Tue Apr 10 18:46:51 2012] ../../acisf04175/products/images/fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1_src.img and ../../acisf04175/products/images/fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 18:46:51 2012] rmf not found, will run specextract
[Tue Apr 10 18:46:51 2012] arf not found, will run specextract
[Tue Apr 10 18:46:53 2012] ../../acisf04175/products/spectra/fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1_bkg.pi not found
[Tue Apr 10 18:46:53 2012] ../../acisf04175/products/spectra/fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1.warf not found
[Tue Apr 10 18:46:53 2012] ../../acisf04175/products/spectra/fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1.wrmf not found
[Tue Apr 10 18:46:53 2012] Removal of ../../acisf04175/products/spectra/fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1.soff failed
[Tue Apr 10 18:46:53 2012] Failed to rename ../../acisf04175/products/spectra/fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1_grp.pi to ../../acisf04175/products/spectra/fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1_src.pi
[Tue Apr 10 18:46:59 2012] ../../acisf04175/products/lightcurves/fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1_src.lc and ../../acisf04175/products/lightcurves/fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 18:48:43 2012] No arf file found
[Tue Apr 10 18:51:16 2012] Updating aperture counts using extracted products
[Tue Apr 10 18:51:16 2012] Error reading totcts from fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1_src.pi
[Tue Apr 10 18:51:16 2012] No arf file for this source, not re-computing flux
[Tue Apr 10 18:51:20 2012] Source 1 has no response, skipping
[Tue Apr 10 18:51:21 2012] acisf04175/analysis//spectral/fullrun_ccd2_acisf04175_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete