[Thu Oct 27 08:19:19 2011] Detection parameters:
  Position = (1360.0, 868.9) = 14 14 47.23 36 16 27.0
  Extent = 1.6" x 1.1", rotation angle = 79 degrees
  Source counts = 16.8 +/- 4.6
  Background counts = 4.2
  Rate = 0.0002 +/- 5e-05

[Thu Oct 27 08:19:20 2011] Off-axis axis estimate = 8.11'
[Thu Oct 27 08:20:27 2011] Using EEF radius (= 2.91 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 08:20:27 2011] Initial guess for spatial extent in simple fitting = 2.91"
[Thu Oct 27 08:20:27 2011] source mask rpix=5.9, npix_max = 164, mask sum = 156, frac = 0.951
[Thu Oct 27 08:20:27 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 2.91"
[Thu Oct 27 08:20:30 2011] fullrun_ccd3_acisf04163_pi14-548_cl_pass0_src28.ximg exists
[Thu Oct 27 08:20:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04163_pi14-548_cl_pass0_src28.csv
[Thu Oct 27 08:20:30 2011] fullrun_ccd3_acisf04163_pi14-548_cl_pass0_src28_1.ximg exists
[Thu Oct 27 08:20:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04163_pi14-548_cl_pass0_src28.csv
[Thu Oct 27 08:20:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04163_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04163_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 08:20:30 2011] fullrun_ccd3_acisf04163_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Thu Oct 27 08:20:30 2011] fullrun_ccd3_acisf04163_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Oct 27 08:20:30 2011] Fit fullrun_ccd3_acisf04163_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Thu Oct 27 08:20:59 2011] Spatial fit model total counts = 48.619900, observed total counts = 49.000000
[Thu Oct 27 08:20:59 2011] Offset between fit and detection position for source 50 = 1.614627 pixels
[Thu Oct 27 08:20:59 2011] 49.105180 total counts/ 3.957380 bgd. counts: snr = 22.695132
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 1.614627 pixels
  Position = (1361.6, 868.4) = 14 14 47.18 36 16 26.5
  Extent = 4.0 (1.1-5.4)", rotation angle = 0
  Source counts = 45.1 +/- 7.0
  Background counts = 4.0
  Rate = 0.0005 +/- 8e-05
[Thu Oct 27 08:20:59 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 08:20:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 08:20:59 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 08:20:59 2011] Source does appear to be extended
[Thu Oct 27 08:20:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 08:21:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 08:21:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 08:21:32 2011] Initial guess for spatial extent in simple fitting = 3.95"
[Thu Oct 27 08:21:32 2011] source mask rpix=8.0, npix_max = 291, mask sum = 289, frac = 0.992
[Thu Oct 27 08:21:32 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 3.95"
[Thu Oct 27 08:21:34 2011] fullrun_ccd3_acisf04163_pi14-548_cl_pass1_src28.ximg exists
[Thu Oct 27 08:21:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04163_pi14-548_cl_pass1_src28.csv
[Thu Oct 27 08:21:34 2011] fullrun_ccd3_acisf04163_pi14-548_cl_pass1_src28_1.ximg exists
[Thu Oct 27 08:21:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04163_pi14-548_cl_pass1_src28.csv
[Thu Oct 27 08:21:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04163_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04163_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 08:21:36 2011] fullrun_ccd3_acisf04163_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Thu Oct 27 08:21:36 2011] fullrun_ccd3_acisf04163_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Oct 27 08:21:36 2011] Fit fullrun_ccd3_acisf04163_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Thu Oct 27 08:21:57 2011] Warning, spatial fit 28 centroid is now closest to src. 39
[Thu Oct 27 08:21:57 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 08:21:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 08:21:57 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 08:21:57 2011] Source does appear to be extended
[Thu Oct 27 08:21:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 08:33:42 2011] Not overwriting source region fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50_src.reg
[Thu Oct 27 08:33:42 2011] Extracting stamp from image fullrun_ccd3_acisf04163_pi14-548_cl_sm2.00.img.gz, (1181, 688) - (1425, 1049)
[Thu Oct 27 08:33:42 2011] Writing fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50.gif
[Thu Oct 27 08:36:57 2011] ../../acisf04163/products/events/fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50_src.evt and ../../acisf04163/products/events/fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50_bgd.evt exist, delete to re-create
[Thu Oct 27 08:36:57 2011] Size of ../../acisf04163/products/events/fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50_src.evt.gz[events] = 76 counts
[Thu Oct 27 08:36:57 2011] Mean chipx,y = (980.96, 33.28)
[Thu Oct 27 08:36:57 2011] Mean tdetx,y = (5098.72, 4041.96)
[Thu Oct 27 08:36:57 2011] chipx,y range = (944.00-1022.00, 4.00-66.00)
[Thu Oct 27 08:36:57 2011] Size of ../../acisf04163/products/events/fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50_bgd.evt.gz[events] = 256 counts
[Thu Oct 27 08:36:57 2011] ../../acisf04163/products/images/fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50_src.img and ../../acisf04163/products/images/fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50_bgd.img exist, delete to re-create
[Thu Oct 27 08:36:57 2011] Not generating rmf since there are only 45 counts
[Thu Oct 27 08:36:57 2011] arf not found, will run specextract
[Thu Oct 27 08:36:59 2011] ../../acisf04163/products/spectra/fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50_bkg.pi not found
[Thu Oct 27 08:36:59 2011] ../../acisf04163/products/spectra/fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50.warf not found
[Thu Oct 27 08:36:59 2011] ../../acisf04163/products/spectra/fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50.wrmf not found
[Thu Oct 27 08:36:59 2011] Removal of ../../acisf04163/products/spectra/fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50.soff failed
[Thu Oct 27 08:36:59 2011] Failed to rename ../../acisf04163/products/spectra/fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50_grp.pi to ../../acisf04163/products/spectra/fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50_src.pi
[Thu Oct 27 08:37:04 2011] ../../acisf04163/products/lightcurves/fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50_src.lc and ../../acisf04163/products/lightcurves/fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50_bgd.lc exist, delete to re-create
[Thu Oct 27 08:39:21 2011] No arf file found
[Thu Oct 27 08:39:34 2011] Updating aperture counts using extracted products
[Thu Oct 27 08:39:34 2011] Error reading totcts from fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50_src.pi
[Thu Oct 27 08:39:34 2011] No arf file for this source, not re-computing flux
[Thu Oct 27 08:39:41 2011] Source 50 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 27 08:39:42 2011] acisf04163/analysis//spectral/fullrun_ccd3_acisf04163_pi14-548_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete