[Tue Oct 18 07:30:52 2011] Detection parameters:
  Position = (616.6, 637.0) = 2 4 43.22 -5 11 16.8
  Extent = 2.0" x 0.9", rotation angle = 28 degrees
  Source counts = 57.2 +/- 8.5
  Background counts = 14.8
  Rate = 0.0004 +/- 5e-05

[Tue Oct 18 07:30:54 2011] Off-axis axis estimate = 6.00'
[Tue Oct 18 07:33:07 2011] Using EEF radius (= 1.63 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:33:07 2011] Initial guess for spatial extent in simple fitting = 1.63"
[Tue Oct 18 07:33:07 2011] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.964
[Tue Oct 18 07:33:07 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 1.63"
[Tue Oct 18 07:33:08 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src17.ximg exists
[Tue Oct 18 07:33:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src17.csv
[Tue Oct 18 07:33:08 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src17_1.ximg exists
[Tue Oct 18 07:33:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src17.csv
[Tue Oct 18 07:33:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:09 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Tue Oct 18 07:33:09 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Oct 18 07:33:09 2011] Fit fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Oct 18 07:33:38 2011] Spatial fit model total counts = 68.796500, observed total counts = 68.000000
[Tue Oct 18 07:33:38 2011] Offset between fit and detection position for source 9 = 0.802620 pixels
[Tue Oct 18 07:33:38 2011] 68.927400 total counts/ 23.942500 bgd. counts: snr = 9.193524
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.802620 pixels
  Position = (617.1, 637.6) = 2 4 43.22 -5 11 16.7
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 45.0 +/- 8.3
  Background counts = 23.9
  Rate = 0.0003 +/- 5e-05
[Tue Oct 18 07:33:38 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:38 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:38 2011] Source does appear to be extended
[Tue Oct 18 07:33:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:19 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Tue Oct 18 07:34:19 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.918
[Tue Oct 18 07:34:19 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 1.04"
[Tue Oct 18 07:34:21 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src17.ximg exists
[Tue Oct 18 07:34:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src17.csv
[Tue Oct 18 07:34:21 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src17_1.ximg exists
[Tue Oct 18 07:34:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src17.csv
[Tue Oct 18 07:34:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:21 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Tue Oct 18 07:34:22 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Oct 18 07:34:22 2011] Fit fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Tue Oct 18 07:34:49 2011] Spatial fit model total counts = 61.525300, observed total counts = 62.000000
[Tue Oct 18 07:34:49 2011] Offset between fit and detection position for source 9 = 0.382620 pixels
[Tue Oct 18 07:34:49 2011] 61.674300 total counts/ 23.250800 bgd. counts: snr = 7.968526
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.382620 pixels
  Position = (616.8, 637.4) = 2 4 43.23 -5 11 16.8
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 38.4 +/- 7.9
  Background counts = 23.3
  Rate = 0.0002 +/- 5e-05
[Tue Oct 18 07:34:49 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:49 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:49 2011] Source does appear to be extended
[Tue Oct 18 07:34:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:40:56 2011] Not overwriting source region fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src9_src.reg
[Tue Oct 18 07:40:56 2011] Extracting stamp from image fullrun_ccd3_acisf04129_pi14-548_cl_sm2.00.img.gz, (575, 595) - (659, 679)
[Tue Oct 18 07:40:56 2011] Writing fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src9.gif
[Tue Oct 18 07:41:45 2011] ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src9_src.evt and ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Tue Oct 18 07:41:45 2011] Size of ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src9_src.evt.gz[events] = 56 counts
[Tue Oct 18 07:41:45 2011] Mean chipx,y = (557.66, 396.43)
[Tue Oct 18 07:41:45 2011] Mean tdetx,y = (4735.57, 3618.66)
[Tue Oct 18 07:41:45 2011] chipx,y range = (536.00-576.00, 375.00-417.00)
[Tue Oct 18 07:41:45 2011] Size of ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 77 counts
[Tue Oct 18 07:41:45 2011] ../../acisf04129/products/images/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src9_src.img and ../../acisf04129/products/images/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Tue Oct 18 07:41:45 2011] ../../acisf04129/products/spectra/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src9_src.pi and ../../acisf04129/products/spectra/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Tue Oct 18 07:41:45 2011] Not generating rmf since there are only 38 counts
[Tue Oct 18 07:41:48 2011] ../../acisf04129/products/lightcurves/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src9_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Tue Oct 18 07:43:00 2011] 183.949
[Tue Oct 18 07:43:47 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:47 2011] Error reading totcts from fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src9_src.pi.gz
[Tue Oct 18 07:43:48 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:48 2011] Using photon index=1.80, rate=0.00024, arf fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src9.arf
[Tue Oct 18 07:43:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:48 2011] Updating source flux to 2.9e-15
[Tue Oct 18 07:45:10 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting