[Tue Oct 18 07:30:53 2011] Detection parameters:
  Position = (584.4, 1228.6) = 2 4 44.28 -5 6 25.7
  Extent = 0.6" x 0.5", rotation angle = 103 degrees
  Source counts = 51.6 +/- 7.4
  Background counts = 3.4
  Rate = 0.0003 +/- 5e-05

[Tue Oct 18 07:30:54 2011] Off-axis axis estimate = 1.14'
[Tue Oct 18 07:33:07 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:33:07 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Oct 18 07:33:07 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.385
[Tue Oct 18 07:33:07 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.38"
[Tue Oct 18 07:33:08 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src18.ximg exists
[Tue Oct 18 07:33:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src18.csv
[Tue Oct 18 07:33:08 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src18_1.ximg exists
[Tue Oct 18 07:33:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src18.csv
[Tue Oct 18 07:33:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:09 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Tue Oct 18 07:33:09 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Oct 18 07:33:09 2011] Fit fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Tue Oct 18 07:33:38 2011] Spatial fit model total counts = 57.220200, observed total counts = 58.000000
[Tue Oct 18 07:33:38 2011] Offset between fit and detection position for source 38 = 0.787544 pixels
[Tue Oct 18 07:33:38 2011] 57.429120 total counts/ 8.661220 bgd. counts: snr = 16.570840
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.787544 pixels
  Position = (584.7, 1229.3) = 2 4 44.29 -5 6 25.6
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 48.8 +/- 7.6
  Background counts = 8.7
  Rate = 0.0003 +/- 5e-05
[Tue Oct 18 07:33:38 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:38 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:38 2011] Source does appear to be extended
[Tue Oct 18 07:33:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:19 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Tue Oct 18 07:34:19 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.314
[Tue Oct 18 07:34:19 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.40"
[Tue Oct 18 07:34:21 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src18.ximg exists
[Tue Oct 18 07:34:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src18.csv
[Tue Oct 18 07:34:21 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src18_1.ximg exists
[Tue Oct 18 07:34:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src18.csv
[Tue Oct 18 07:34:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:22 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Tue Oct 18 07:34:22 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Oct 18 07:34:22 2011] Fit fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Oct 18 07:34:49 2011] Spatial fit model total counts = 57.592800, observed total counts = 58.000000
[Tue Oct 18 07:34:49 2011] Offset between fit and detection position for source 38 = 0.004475 pixels
[Tue Oct 18 07:34:49 2011] 57.629930 total counts/ 8.438230 bgd. counts: snr = 16.934257
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.004475 pixels
  Position = (584.7, 1229.3) = 2 4 44.29 -5 6 25.6
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 49.2 +/- 7.6
  Background counts = 8.4
  Rate = 0.0003 +/- 5e-05
[Tue Oct 18 07:34:49 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:49 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:49 2011] Source does appear to be extended
[Tue Oct 18 07:34:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:40:56 2011] Not overwriting source region fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src38_src.reg
[Tue Oct 18 07:40:56 2011] Extracting stamp from image fullrun_ccd3_acisf04129_pi14-548_cl_sm2.00.img.gz, (566, 1211) - (603, 1248)
[Tue Oct 18 07:40:56 2011] Writing fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src38.gif
[Tue Oct 18 07:41:48 2011] ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src38_src.evt and ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src38_bgd.evt exist, delete to re-create
[Tue Oct 18 07:41:48 2011] Size of ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src38_src.evt.gz[events] = 51 counts
[Tue Oct 18 07:41:48 2011] Mean chipx,y = (895.24, 885.37)
[Tue Oct 18 07:41:48 2011] Mean tdetx,y = (4246.63, 3956.24)
[Tue Oct 18 07:41:48 2011] chipx,y range = (878.00-912.00, 868.00-902.00)
[Tue Oct 18 07:41:48 2011] Size of ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src38_bgd.evt.gz[events] = 12 counts
[Tue Oct 18 07:41:48 2011] ../../acisf04129/products/images/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src38_src.img and ../../acisf04129/products/images/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src38_bgd.img exist, delete to re-create
[Tue Oct 18 07:41:48 2011] ../../acisf04129/products/spectra/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src38_src.pi and ../../acisf04129/products/spectra/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src38_bgd.pi exist, delete to re-create
[Tue Oct 18 07:41:48 2011] Not generating rmf since there are only 49 counts
[Tue Oct 18 07:41:51 2011] ../../acisf04129/products/lightcurves/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src38_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src38_bgd.lc exist, delete to re-create
[Tue Oct 18 07:43:00 2011] 204.133
[Tue Oct 18 07:43:47 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:47 2011] Error reading totcts from fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src38_src.pi.gz
[Tue Oct 18 07:43:48 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:48 2011] Using photon index=1.80, rate=0.000307, arf fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src38.arf
[Tue Oct 18 07:43:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:48 2011] Updating source flux to 3.4e-15
[Tue Oct 18 07:45:10 2011] Source 38 has fewer than 100.000000 counts, skipping spectral fitting