[Tue Oct 18 07:30:53 2011] Detection parameters:
  Position = (527.9, 1198.1) = 2 4 46.14 -5 6 40.7
  Extent = 0.5" x 0.5", rotation angle = 12 degrees
  Source counts = 101.6 +/- 10.3
  Background counts = 5.4
  Rate = 0.0006 +/- 6e-05

[Tue Oct 18 07:30:54 2011] Off-axis axis estimate = 1.49'
[Tue Oct 18 07:33:07 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:33:07 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Tue Oct 18 07:33:07 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.595
[Tue Oct 18 07:33:07 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.39"
[Tue Oct 18 07:33:08 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src9.ximg exists
[Tue Oct 18 07:33:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src9.csv
[Tue Oct 18 07:33:08 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src9_1.ximg exists
[Tue Oct 18 07:33:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src9.csv
[Tue Oct 18 07:33:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:08 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Tue Oct 18 07:33:08 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Oct 18 07:33:08 2011] Fit fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Oct 18 07:33:38 2011] Spatial fit model total counts = 117.000000, observed total counts = 117.000000
[Tue Oct 18 07:33:38 2011] Offset between fit and detection position for source 36 = 0.671664 pixels
[Tue Oct 18 07:33:38 2011] 117.794500 total counts/ 20.128100 bgd. counts: snr = 21.769266
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.671664 pixels
  Position = (528.4, 1198.6) = 2 4 46.14 -5 6 40.7
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 97.7 +/- 10.9
  Background counts = 20.1
  Rate = 0.0006 +/- 7e-05
[Tue Oct 18 07:33:38 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:38 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:38 2011] Source does appear to be extended
[Tue Oct 18 07:33:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:19 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Tue Oct 18 07:34:19 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.103
[Tue Oct 18 07:34:19 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.46"
[Tue Oct 18 07:34:20 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src9.ximg exists
[Tue Oct 18 07:34:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src9.csv
[Tue Oct 18 07:34:20 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src9_1.ximg exists
[Tue Oct 18 07:34:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src9.csv
[Tue Oct 18 07:34:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:21 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Tue Oct 18 07:34:21 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Oct 18 07:34:21 2011] Fit fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Oct 18 07:34:49 2011] Spatial fit model total counts = 117.000000, observed total counts = 117.000000
[Tue Oct 18 07:34:49 2011] Offset between fit and detection position for source 36 = 0.000005 pixels
[Tue Oct 18 07:34:49 2011] 117.794300 total counts/ 20.128900 bgd. counts: snr = 21.768611
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.000005 pixels
  Position = (528.4, 1198.6) = 2 4 46.14 -5 6 40.7
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 97.7 +/- 10.9
  Background counts = 20.1
  Rate = 0.0006 +/- 7e-05
[Tue Oct 18 07:34:49 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:49 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:49 2011] Source does appear to be extended
[Tue Oct 18 07:34:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:40:56 2011] Not overwriting source region fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src36_src.reg
[Tue Oct 18 07:40:56 2011] Extracting stamp from image fullrun_ccd3_acisf04129_pi14-548_cl_sm2.00.img.gz, (507, 1178) - (549, 1219)
[Tue Oct 18 07:40:56 2011] Writing fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src36.gif
[Tue Oct 18 07:41:22 2011] ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src36_src.evt and ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Tue Oct 18 07:41:22 2011] Size of ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src36_src.evt.gz[events] = 100 counts
[Tue Oct 18 07:41:22 2011] Mean chipx,y = (927.51, 828.21)
[Tue Oct 18 07:41:22 2011] Mean tdetx,y = (4303.79, 3988.51)
[Tue Oct 18 07:41:22 2011] chipx,y range = (910.00-944.00, 811.00-847.00)
[Tue Oct 18 07:41:22 2011] Size of ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 18 counts
[Tue Oct 18 07:41:22 2011] ../../acisf04129/products/images/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src36_src.img and ../../acisf04129/products/images/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Tue Oct 18 07:41:22 2011] ../../acisf04129/products/spectra/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src36_src.pi and ../../acisf04129/products/spectra/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src36_bgd.pi exist, delete to re-create
[Tue Oct 18 07:41:22 2011] Not generating rmf since there are only 97 counts
[Tue Oct 18 07:41:24 2011] ../../acisf04129/products/lightcurves/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src36_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Tue Oct 18 07:43:00 2011] 204.469
[Tue Oct 18 07:43:47 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:47 2011] Error reading totcts from fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src36_src.pi.gz
[Tue Oct 18 07:43:47 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:47 2011] Using photon index=1.80, rate=0.00061, arf fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src36.arf
[Tue Oct 18 07:43:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:47 2011] Updating source flux to 6.7e-15
[Tue Oct 18 07:45:10 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting