[Tue Oct 18 07:30:53 2011] Detection parameters:
  Position = (383.5, 1100.9) = 2 4 50.90 -5 7 28.5
  Extent = 0.5" x 0.5", rotation angle = 166 degrees
  Source counts = 32.8 +/- 6.0
  Background counts = 3.2
  Rate = 0.0002 +/- 4e-05

[Tue Oct 18 07:30:54 2011] Off-axis axis estimate = 2.77'
[Tue Oct 18 07:33:07 2011] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:33:07 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Tue Oct 18 07:33:07 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.888
[Tue Oct 18 07:33:07 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.54"
[Tue Oct 18 07:33:08 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src19.ximg exists
[Tue Oct 18 07:33:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src19.csv
[Tue Oct 18 07:33:08 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src19_1.ximg exists
[Tue Oct 18 07:33:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src19.csv
[Tue Oct 18 07:33:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:09 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Tue Oct 18 07:33:09 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Oct 18 07:33:09 2011] Fit fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Oct 18 07:33:38 2011] Spatial fit model total counts = 43.990200, observed total counts = 44.000000
[Tue Oct 18 07:33:38 2011] Offset between fit and detection position for source 30 = 0.703026 pixels
[Tue Oct 18 07:33:38 2011] 43.705500 total counts/ 13.402600 bgd. counts: snr = 8.277318
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.703026 pixels
  Position = (383.9, 1101.4) = 2 4 50.90 -5 7 28.5
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 30.3 +/- 6.6
  Background counts = 13.4
  Rate = 0.0002 +/- 4e-05
[Tue Oct 18 07:33:38 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:38 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:38 2011] Source does appear to be extended
[Tue Oct 18 07:33:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:19 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Tue Oct 18 07:34:19 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.964
[Tue Oct 18 07:34:19 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.62"
[Tue Oct 18 07:34:21 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src19.ximg exists
[Tue Oct 18 07:34:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src19.csv
[Tue Oct 18 07:34:21 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src19_1.ximg exists
[Tue Oct 18 07:34:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src19.csv
[Tue Oct 18 07:34:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:22 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Tue Oct 18 07:34:22 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Oct 18 07:34:22 2011] Fit fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Tue Oct 18 07:34:49 2011] Spatial fit model total counts = 41.999200, observed total counts = 42.000000
[Tue Oct 18 07:34:49 2011] Offset between fit and detection position for source 30 = 0.006962 pixels
[Tue Oct 18 07:34:49 2011] 42.035600 total counts/ 11.187600 bgd. counts: snr = 9.222710
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.006962 pixels
  Position = (383.9, 1101.4) = 2 4 50.90 -5 7 28.5
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 30.8 +/- 6.5
  Background counts = 11.2
  Rate = 0.0002 +/- 4e-05
[Tue Oct 18 07:34:49 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:49 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:49 2011] Source does appear to be extended
[Tue Oct 18 07:34:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:40:56 2011] Not overwriting source region fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src30_src.reg
[Tue Oct 18 07:40:56 2011] Extracting stamp from image fullrun_ccd3_acisf04129_pi14-548_cl_sm2.00.img.gz, (355, 1072) - (413, 1130)
[Tue Oct 18 07:40:56 2011] Writing fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src30.gif
[Tue Oct 18 07:41:51 2011] ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src30_src.evt and ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Tue Oct 18 07:41:51 2011] Size of ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src30_src.evt.gz[events] = 35 counts
[Tue Oct 18 07:41:51 2011] Mean chipx,y = (1000.97, 671.00)
[Tue Oct 18 07:41:51 2011] Mean tdetx,y = (4461.00, 4061.97)
[Tue Oct 18 07:41:51 2011] chipx,y range = (983.00-1018.00, 653.00-686.00)
[Tue Oct 18 07:41:51 2011] Size of ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 31 counts
[Tue Oct 18 07:41:51 2011] ../../acisf04129/products/images/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src30_src.img and ../../acisf04129/products/images/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Tue Oct 18 07:41:51 2011] ../../acisf04129/products/spectra/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src30_src.pi and ../../acisf04129/products/spectra/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Tue Oct 18 07:41:51 2011] Not generating rmf since there are only 30 counts
[Tue Oct 18 07:41:54 2011] ../../acisf04129/products/lightcurves/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src30_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Tue Oct 18 07:43:00 2011] 202.627
[Tue Oct 18 07:43:47 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:47 2011] Error reading totcts from fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src30_src.pi.gz
[Tue Oct 18 07:43:48 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:48 2011] Using photon index=1.80, rate=0.000193, arf fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src30.arf
[Tue Oct 18 07:43:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:48 2011] Updating source flux to 2.1e-15
[Tue Oct 18 07:45:10 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting