[Tue Oct 18 07:30:53 2011] Detection parameters:
  Position = (893.5, 1097.4) = 2 4 34.10 -5 7 30.2
  Extent = 0.8" x 0.5", rotation angle = 35 degrees
  Source counts = 20.4 +/- 4.9
  Background counts = 3.6
  Rate = 0.0001 +/- 3e-05

[Tue Oct 18 07:30:54 2011] Off-axis axis estimate = 3.33'
[Tue Oct 18 07:33:07 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:33:07 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Tue Oct 18 07:33:07 2011] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.677
[Tue Oct 18 07:33:07 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 0.65"
[Tue Oct 18 07:33:08 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src25.ximg exists
[Tue Oct 18 07:33:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src25.csv
[Tue Oct 18 07:33:08 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src25_1.ximg exists
[Tue Oct 18 07:33:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src25.csv
[Tue Oct 18 07:33:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:09 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Tue Oct 18 07:33:09 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Tue Oct 18 07:33:09 2011] Fit fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Tue Oct 18 07:33:38 2011] Spatial fit model total counts = 28.727200, observed total counts = 29.000000
[Tue Oct 18 07:33:38 2011] Offset between fit and detection position for source 29 = 0.599811 pixels
[Tue Oct 18 07:33:38 2011] 28.815100 total counts/ 11.628300 bgd. counts: snr = 5.040074
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.599811 pixels
  Position = (894.1, 1097.6) = 2 4 34.10 -5 7 30.4
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 17.2 +/- 5.4
  Background counts = 11.6
  Rate = 0.0001 +/- 3e-05
[Tue Oct 18 07:33:38 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:38 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:38 2011] Source does appear to be extended
[Tue Oct 18 07:33:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:19 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Tue Oct 18 07:34:19 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.888
[Tue Oct 18 07:34:19 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 0.54"
[Tue Oct 18 07:34:21 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src25.ximg exists
[Tue Oct 18 07:34:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src25.csv
[Tue Oct 18 07:34:21 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src25_1.ximg exists
[Tue Oct 18 07:34:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src25.csv
[Tue Oct 18 07:34:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:22 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Tue Oct 18 07:34:22 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Tue Oct 18 07:34:22 2011] Fit fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Tue Oct 18 07:34:49 2011] Spatial fit model total counts = 31.948500, observed total counts = 31.000000
[Tue Oct 18 07:34:49 2011] Offset between fit and detection position for source 29 = 0.045039 pixels
[Tue Oct 18 07:34:49 2011] 31.906100 total counts/ 14.529300 bgd. counts: snr = 4.558768
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.045039 pixels
  Position = (894.1, 1097.6) = 2 4 34.10 -5 7 30.4
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 17.4 +/- 5.6
  Background counts = 14.5
  Rate = 0.0001 +/- 4e-05
[Tue Oct 18 07:34:49 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:49 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:49 2011] Source does appear to be extended
[Tue Oct 18 07:34:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:40:56 2011] Not overwriting source region fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src29_src.reg
[Tue Oct 18 07:40:56 2011] Extracting stamp from image fullrun_ccd3_acisf04129_pi14-548_cl_sm2.00.img.gz, (871, 1075) - (917, 1120)
[Tue Oct 18 07:40:56 2011] Writing fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src29.gif
[Tue Oct 18 07:42:08 2011] ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src29_src.evt and ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Tue Oct 18 07:42:08 2011] Size of ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src29_src.evt.gz[events] = 22 counts
[Tue Oct 18 07:42:08 2011] Mean chipx,y = (565.50, 933.14)
[Tue Oct 18 07:42:08 2011] Mean tdetx,y = (4198.86, 3626.50)
[Tue Oct 18 07:42:08 2011] chipx,y range = (546.00-579.00, 913.00-948.00)
[Tue Oct 18 07:42:08 2011] Size of ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 31 counts
[Tue Oct 18 07:42:08 2011] ../../acisf04129/products/images/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src29_src.img and ../../acisf04129/products/images/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Tue Oct 18 07:42:08 2011] ../../acisf04129/products/spectra/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src29_src.pi and ../../acisf04129/products/spectra/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Tue Oct 18 07:42:08 2011] Not generating rmf since there are only 17 counts
[Tue Oct 18 07:42:10 2011] ../../acisf04129/products/lightcurves/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src29_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Tue Oct 18 07:43:00 2011] 191.669
[Tue Oct 18 07:43:47 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:47 2011] Error reading totcts from fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src29_src.pi.gz
[Tue Oct 18 07:43:48 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:48 2011] Using photon index=1.80, rate=0.000109, arf fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src29.arf
[Tue Oct 18 07:43:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:48 2011] Updating source flux to 1.3e-15
[Tue Oct 18 07:45:10 2011] Source 29 has fewer than 100.000000 counts, skipping spectral fitting