[Tue Oct 18 07:30:53 2011] Detection parameters:
  Position = (491.8, 1087.2) = 2 4 47.33 -5 7 35.3
  Extent = 0.7" x 0.5", rotation angle = 1 degrees
  Source counts = 15.6 +/- 4.2
  Background counts = 2.4
  Rate = 0.0001 +/- 3e-05

[Tue Oct 18 07:30:54 2011] Off-axis axis estimate = 2.44'
[Tue Oct 18 07:33:07 2011] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:33:07 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Tue Oct 18 07:33:07 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.022
[Tue Oct 18 07:33:07 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 0.48"
[Tue Oct 18 07:33:08 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src29.ximg exists
[Tue Oct 18 07:33:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src29.csv
[Tue Oct 18 07:33:08 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src29_1.ximg exists
[Tue Oct 18 07:33:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src29.csv
[Tue Oct 18 07:33:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04129_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:09 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Tue Oct 18 07:33:09 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Oct 18 07:33:09 2011] Fit fullrun_ccd3_acisf04129_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Tue Oct 18 07:33:38 2011] Spatial fit model total counts = 26.976800, observed total counts = 27.000000
[Tue Oct 18 07:33:38 2011] Offset between fit and detection position for source 28 = 0.589627 pixels
[Tue Oct 18 07:33:38 2011] 27.562800 total counts/ 15.972200 bgd. counts: snr = 2.900171
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.589627 pixels
  Position = (491.9, 1087.8) = 2 4 47.34 -5 7 35.2
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 11.6 +/- 5.3
  Background counts = 16.0
  Rate = 7e-05 +/- 3e-05
[Tue Oct 18 07:33:38 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:38 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:38 2011] Source does appear to be extended
[Tue Oct 18 07:33:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:19 2011] Initial guess for spatial extent in simple fitting = 0.26"
[Tue Oct 18 07:34:19 2011] source mask rpix=0.5, npix_max = 4, mask sum = 4, frac = 0.955
[Tue Oct 18 07:34:19 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 0.26"
[Tue Oct 18 07:34:21 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src29.ximg exists
[Tue Oct 18 07:34:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src29.csv
[Tue Oct 18 07:34:21 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src29_1.ximg exists
[Tue Oct 18 07:34:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src29.csv
[Tue Oct 18 07:34:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf04129_pi14-548_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:22 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Tue Oct 18 07:34:22 2011] fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Tue Oct 18 07:34:22 2011] Fit fullrun_ccd3_acisf04129_pi14-548_cl_pass1_tfrozen_src29 appears to have run properly
[Tue Oct 18 07:34:49 2011] Spatial fit model total counts = 28.986800, observed total counts = 29.000000
[Tue Oct 18 07:34:49 2011] Offset between fit and detection position for source 28 = 0.001813 pixels
[Tue Oct 18 07:34:49 2011] 29.273100 total counts/ 17.702600 bgd. counts: snr = 2.750006
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.001813 pixels
  Position = (491.9, 1087.8) = 2 4 47.34 -5 7 35.2
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 11.6 +/- 5.4
  Background counts = 17.7
  Rate = 7e-05 +/- 3e-05
[Tue Oct 18 07:34:49 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:49 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:49 2011] Source does appear to be extended
[Tue Oct 18 07:34:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:40:56 2011] Not overwriting source region fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src28_src.reg
[Tue Oct 18 07:40:56 2011] Extracting stamp from image fullrun_ccd3_acisf04129_pi14-548_cl_sm2.00.img.gz, (480, 1076) - (504, 1100)
[Tue Oct 18 07:40:56 2011] Writing fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src28.gif
[Tue Oct 18 07:42:18 2011] ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src28_src.evt and ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Tue Oct 18 07:42:18 2011] Size of ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src28_src.evt.gz[events] = 13 counts
[Tue Oct 18 07:42:18 2011] Mean chipx,y = (898.85, 713.08)
[Tue Oct 18 07:42:18 2011] Mean tdetx,y = (4418.92, 3959.85)
[Tue Oct 18 07:42:18 2011] chipx,y range = (883.00-916.00, 699.00-731.00)
[Tue Oct 18 07:42:19 2011] Size of ../../acisf04129/products/events/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 8 counts
[Tue Oct 18 07:42:19 2011] ../../acisf04129/products/images/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src28_src.img and ../../acisf04129/products/images/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Tue Oct 18 07:42:19 2011] ../../acisf04129/products/spectra/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src28_src.pi and ../../acisf04129/products/spectra/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Tue Oct 18 07:42:19 2011] Not generating rmf since there are only 11 counts
[Tue Oct 18 07:42:21 2011] ../../acisf04129/products/lightcurves/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src28_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Tue Oct 18 07:43:01 2011] 202.518
[Tue Oct 18 07:43:47 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:47 2011] Error reading totcts from fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src28_src.pi.gz
[Tue Oct 18 07:43:48 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:48 2011] Using photon index=1.80, rate=7.23e-05, arf fullrun_ccd3_acisf04129_pi14-548_pass1_cl_src28.arf
[Tue Oct 18 07:43:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:48 2011] Updating source flux to 7.9e-16
[Tue Oct 18 07:45:10 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting