[Tue Oct 18 07:30:48 2011] Detection parameters:
  Position = (663.6, 441.4) = 2 4 23.46 -5 5 35.6
  Extent = 1.0" x 0.8", rotation angle = 59 degrees
  Source counts = 139.8 +/- 12.2
  Background counts = 8.2
  Rate = 0.0009 +/- 8e-05

[Tue Oct 18 07:30:51 2011] Off-axis axis estimate = 5.14'
[Tue Oct 18 07:33:03 2011] Using EEF radius (= 1.24 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:33:03 2011] Initial guess for spatial extent in simple fitting = 1.24"
[Tue Oct 18 07:33:03 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Tue Oct 18 07:33:03 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.24"
[Tue Oct 18 07:33:04 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src10.ximg exists
[Tue Oct 18 07:33:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src10.csv
[Tue Oct 18 07:33:04 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src10_1.ximg exists
[Tue Oct 18 07:33:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src10.csv
[Tue Oct 18 07:33:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04129_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:33:05 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Tue Oct 18 07:33:05 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Oct 18 07:33:05 2011] Fit fullrun_ccd2_acisf04129_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Oct 18 07:33:33 2011] Spatial fit model total counts = 151.996000, observed total counts = 152.000000
[Tue Oct 18 07:33:33 2011] Offset between fit and detection position for source 8 = 0.729500 pixels
[Tue Oct 18 07:33:33 2011] 151.940100 total counts/ 23.335100 bgd. counts: snr = 26.622757
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.729500 pixels
  Position = (664.1, 441.9) = 2 4 23.46 -5 5 35.6
  Extent = 1.0 (0.9-1.2)", rotation angle = 0
  Source counts = 128.6 +/- 12.3
  Background counts = 23.3
  Rate = 0.0008 +/- 8e-05
[Tue Oct 18 07:33:33 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:33:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:33:33 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:33:33 2011] Source does appear to be extended
[Tue Oct 18 07:33:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:34:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 07:34:17 2011] Initial guess for spatial extent in simple fitting = 1.01"
[Tue Oct 18 07:34:17 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.954
[Tue Oct 18 07:34:17 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 1.01"
[Tue Oct 18 07:34:18 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src10.ximg exists
[Tue Oct 18 07:34:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src10.csv
[Tue Oct 18 07:34:18 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src10_1.ximg exists
[Tue Oct 18 07:34:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src10.csv
[Tue Oct 18 07:34:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf04129_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 07:34:18 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue Oct 18 07:34:18 2011] fullrun_ccd2_acisf04129_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Oct 18 07:34:18 2011] Fit fullrun_ccd2_acisf04129_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Oct 18 07:34:44 2011] Spatial fit model total counts = 150.801000, observed total counts = 151.000000
[Tue Oct 18 07:34:44 2011] Offset between fit and detection position for source 8 = 0.060666 pixels
[Tue Oct 18 07:34:44 2011] 150.365200 total counts/ 18.992200 bgd. counts: snr = 30.145222
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.060666 pixels
  Position = (664.1, 442.0) = 2 4 23.46 -5 5 35.6
  Extent = 1.1 (0.9-1.1)", rotation angle = 0
  Source counts = 131.4 +/- 12.3
  Background counts = 19.0
  Rate = 0.0008 +/- 8e-05
[Tue Oct 18 07:34:44 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 07:34:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 07:34:44 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 07:34:44 2011] Source does appear to be extended
[Tue Oct 18 07:34:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 07:38:40 2011] Not overwriting source region fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src8_src.reg
[Tue Oct 18 07:38:40 2011] Extracting stamp from image fullrun_ccd2_acisf04129_pi14-548_cl_sm2.00.img.gz, (616, 394) - (712, 490)
[Tue Oct 18 07:38:40 2011] Writing fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src8.gif
[Tue Oct 18 07:39:08 2011] ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src8_src.evt and ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Tue Oct 18 07:39:08 2011] Size of ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src8_src.evt.gz[events] = 150 counts
[Tue Oct 18 07:39:08 2011] Mean chipx,y = (615.98, 765.27)
[Tue Oct 18 07:39:08 2011] Mean tdetx,y = (3826.27, 3470.02)
[Tue Oct 18 07:39:08 2011] chipx,y range = (597.00-635.00, 745.00-791.00)
[Tue Oct 18 07:39:08 2011] Size of ../../acisf04129/products/events/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 104 counts
[Tue Oct 18 07:39:08 2011] ../../acisf04129/products/images/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src8_src.img and ../../acisf04129/products/images/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Tue Oct 18 07:39:08 2011] ../../acisf04129/products/spectra/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src8_src.pi and ../../acisf04129/products/spectra/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Tue Oct 18 07:39:11 2011] ../../acisf04129/products/lightcurves/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src8_src.lc and ../../acisf04129/products/lightcurves/fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Tue Oct 18 07:40:54 2011] Keeping rmf generated by specextract
[Tue Oct 18 07:40:54 2011] 175.019
[Tue Oct 18 07:43:46 2011] Updating aperture counts using extracted products
[Tue Oct 18 07:43:46 2011] Error reading totcts from fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src8_src.pi.gz
[Tue Oct 18 07:43:46 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 07:43:46 2011] Using photon index=1.80, rate=0.00082, arf fullrun_ccd2_acisf04129_pi14-548_pass1_cl_src8.arf
[Tue Oct 18 07:43:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 07:43:46 2011] Updating source flux to 1e-14